Samsung SCX 4725FN User Manual (ENGLISH) - Page 42

Confirming a transmission When the last page of your original has been sent successfully, the machine beeps and returns to Standby mode. When something goes wrong while sending your fax, an error message appears on the display. For a list of error messages and their meanings, see page 13.3. If you receive an error message, press Stop/Clear to clear the message and try to send the fax again. You can set your machine to print a confirmation report automatically each time sending a fax is completed. For further details, see page 10.1. Automatic redialing When the number you have dialed is busy or there is no answer when you send a fax, the machine automatically redials the number every three minutes, up to seven times according to the factory default settings. When the display shows Retry Redial?, press Enter to redial the number without waiting. To cancel the automatic redialing, press Stop/Clear. To change the time interval between redials and the number of redial attempts. See page 10.1. Redialing the last number To redial the number you called last: 1 Press Redial/Pause. 2 When an original is loaded in the ADF, the machine automatically begins to send. 3 If an original is placed on the scanner glass, load another original and press 1 to add another page. When you have finished, press 2 at the Another Page ? prompt. Receiving a fax Changing receiving modes 1 Press Menu until Fax Setup appears on the top line of the display. 2 Press Enter when Receive Mode appears. 3 Press the Scroll buttons until the fax reception mode you want appears. • In Fax mode, the machine answers an incoming fax call and immediately goes into the fax reception mode. • In Tel mode, you can receive a fax by pressing On Hook Dial and then Start. You can also pick up the handset of the extension phone and then press the remote receive code. See page 9.4. • In Ans/Fax mode, an answering machine attached to your machine answers an incoming call, and the caller can leave a message on the answering machine. If the fax machine senses a fax tone on the line, the machine automatically switches to Fax mode to receive the fax. See page 9.4. • In DRPD mode, you can receive a call using the Distinctive Ring Pattern Detection (DRPD) feature. Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. For further details, see page 9.4. 4 Press Enter to save your selection. 5 Press Stop/Clear to return to Standby mode. Notes • When the memory is full, the printer can no longer receive any incoming fax. Secure free memory to resume by removing data stored in the memory. • To use the Ans/Fax mode, attach an answering machine to the EXT socket on the back of your machine. • If you do not want other people to view your received documents, you can use secure receiving mode. In this mode, all of the received faxes are stored in memory. For further details, see page 9.4. Receiving automatically in Fax mode Your machine is preset to Fax mode at the factory. When you receive a fax, the machine answers the call on a specified number of rings and automatically receives the fax. To change the number of rings, see page 10.1. Receiving manually in Tel mode You can receive a fax call by pressing On Hook Dial and then pressing Start when you hear a fax tone from the remote machine. 9.3