Samsung SCX 4725FN User Manual (ENGLISH) - Page 43

The machine begins receiving a fax and returns to Standby mode when the reception is completed. Receiving manually using an extension telephone This features works best when you are using an extension telephone connected to the EXT socket on the back of your machine. You can receive a fax from someone you are talking to on the extension telephone without going to the fax machine. When you receive a call on the extension phone and hear fax tones, press the keys 9 on the extension phone. The machine receives the fax. Press the buttons slowly in sequence. If you still hear the fax tone from the remote machine, try pressing 9 once again. 9 is the remote receive code preset at the factory. The first and the last asterisks are fixed, but you can change the middle number to whatever you wish. For details about changing the code, see page 10.1. Receiving automatically in Ans/Fax mode To use this mode, you must attach an answering machine to the EXT socket on the back of your machine. If the caller leaves a message, the answering machine stores the message as it would normally. If your machine detects a fax tone on the line, it automatically starts to receive the fax. Notes • If you have set your machine to Ans/Fax mode and your answering machine is switched off, or no answering machine is connected to EXT socket, your machine automatically goes into Fax mode after a predefined number of rings. • If your answering machine has a user-selectable ring counter, set the machine to answer incoming calls within 1 ring. • If you are in Tel mode (manual reception) when the answering machine is connected to your machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation. fax machine. Unless you change it, this ringing pattern will continue to be recognized and answered as a fax call, and all other ringing patterns will be forwarded to the extension telephone or answering machine plugged into the EXT socket. You can easily suspend or change DRPD at any time. Before using the DRPD option, Distinctive Ring service must be installed on your telephone line by the telephone company. To set up DRPD, you will need another telephone line at your location, or someone available to dial your fax number from outside. To set up the DRPD mode: 1 Press Menu until Fax Setup appears on the top line of the display. 2 Press the Scroll buttons until DRPD Mode appears and press Enter. 3 Press the Scroll buttons until Set appears and press Enter. Waiting Ring appears on the display. 4 Call your fax number from another telephone. It is not necessary to place the call from a fax machine. 5 When your machine begins to ring, do not answer the call. The machine requires several rings to learn the pattern. When the machine completes learning, the display shows End DRPD [Setup]. If the DRPD setup fails, DRPD Ring Error appears. Press Enter when DRPD Mode appears and start over from step 3. 6 Press Stop/Clear to return to Standby mode. When the DRPD feature is set up, the DRPD option is available for the receiving mode setting. To receive faxes in DRPD mode, you need to set the menu to DRPD. Notes • DRPD must be set up again if you re-assign your fax number, or connect the machine to another telephone line. • After DRPD has been set up, call your fax number again to verify that the machine answers with a fax tone. Then have a call placed to a different number assigned to that same line to be sure the call is forwarded to the extension telephone or answering machine plugged into the EXT socket. Receiving faxes using DRPD mode Distinctive Ring is a telephone company service which enables an user to use a single telephone line to answer several different telephone numbers. The particular number someone uses to call you is identified by different ringing patterns, which consist of various combinations of long and short ringing sounds. This feature is often used by answering services who answer telephones for many different clients and need to know which number someone is calling in on to properly answer the phone. Using the Distinctive Ring Pattern Detection (DRPD) feature, your fax machine can learn the ring pattern you designate to be answered by the Receiving in secure receiving mode You may need to prevent your received faxes from being accessed by unauthorized people. You can turn on secure receiving mode to restrict printing of received faxes when the machine is unattended. In secure receiving mode, all incoming faxes go into memory. When the mode is deactivated, any stored faxes are printed. Activating secure receiving mode 1 Press Menu until Advanced Fax appears on the top line of the display. 9.4