Samsung SCX 4725FN User Manual (ENGLISH) - Page 59

Troubleshooting, Clearing document jams, Input Misfeed, Exit Misfeed, Clearing paper jams

Page 59 highlights

13 Troubleshooting This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Clearing document jams • Clearing paper jams • Understanding display messages • Toner cartridge-related messages • Solving other problems Clearing document jams When an original jams while passing through the ADF, Document Jam appears on the display. Input Misfeed 1 Remove any remaining pages from the ADF. 2 Open the ADF cover. 1 Note If you do not see the paper in this area, refer to Exit Misfeed. See the next section. 4 Close the ADF cover. Then load the removed pages, if any, back into the ADF. Note To prevent document jams, use the scanner glass for thick, thin, or mixed paper-type originals. Exit Misfeed 1 Remove any remaining pages from the ADF. 2 Open the ADF cover. 3 Pull the jammed paper gently out of the document output tray. 1 ADF cover 3 Pull the jammed paper gently out of the ADF. 4 Close the ADF cover. Then load the removed pages, if any, back into the ADF. Clearing paper jams When a paper jam occurs, Paper Jam appears on the display. Refer to the table below to locate and clear the paper jam. Message Location of jam Go to [Paper Jam 0] Open/Close Door [Paper Jam 1] Open/Close Door [Paper Jam 2] Check Inside In the paper feed area (tray or manual tray) In the fuser area or around the toner cartridge In the paper exit area the next section and page 13.2 page 13.2 page 13.2 13.1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121

13
.1
<
Troubleshooting>
13
Troubleshooting
This chapter gives helpful information for what to do if you encounter an
error.
This chapter includes:
Clearing document jams
Clearing paper jams
Understanding display messages
Toner cartridge-related messages
Solving other problems
Clearing document jams
When an original jams while passing through the ADF,
Document Jam
appears on the display.
Input Misfeed
1
Remove any remaining pages from the ADF.
2
Open the ADF cover.
3
Pull the jammed paper gently out of the ADF.
1
ADF cover
1
Note
If you do not see the paper in this area, refer to Exit Misfeed.
See the next section.
4
Close the ADF cover. Then load the removed pages, if any, back into
the ADF.
Note
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.
Exit Misfeed
1
Remove any remaining pages from the ADF.
2
Open the ADF cover.
3
Pull the jammed paper gently out of the document output tray.
4
Close the ADF cover. Then load the removed pages, if any, back into
the ADF.
Clearing paper jams
When a paper jam occurs,
Paper Jam
appears on the display. Refer to the
table below to locate and clear the paper jam.
Message
Location of jam
Go to
[Paper Jam 0]
Open/Close Door
In the paper feed area (tray or
manual tray)
the next
section and
page 13.2
[Paper Jam 1]
Open/Close Door
In the fuser area or around the
toner cartridge
page 13.2
[Paper Jam 2]
Check Inside
In the paper exit area
page 13.2