Samsung SGH-A697 User Manual (user Manual) (ver.f8.4) (English) - Page 141
Set Name, Access Name, Auth Type, User ID, Home URL, Gateway Address, Proxy Address, Secure Connection - user manual
View all Samsung SGH-A697 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Caution!: The WAPs are pre-configured and can not be altered using this screen. If you change the settings without first checking with your service provider, the web browser, MMS, and e-mail features may not work properly. 3. To create a new connection profile, touch Create and follow the onscreen prompts. - or - To edit an existing profile, touch a profile from list, scroll to the desired field, and use the onscreen keypad/keyboard to edit the parameter you want to edit: • Set Name: enter a profile name. • Access Name: edit the access point name. • Auth Type: select the type of authentication used for this WAP connection: None, Normal, or Secure. • User ID: enter the User ID required to connect to the network. • Password: enter the user password required to connect to the network. • Protocol: set the connection protocol used by the WAP browser: WAP or HTTP. • Home URL: enter the URL address of the page to be used as your homepage. • Gateway Address: (WAP only) enter the gateway address of the proxy server. • Proxy Address: (HTTP only) set the proxy server address and port. • Secure Connection: (WAP only) set to On or Off. • Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time. • Advanced Settings: (touch ) allows you to configure some of the IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. - Static IP: specify if you want to manually enter an IP address. If you want the IP address to be automatically assigned by the server, remove the check mark. - Local Phone IP: enter the IP address obtained from the network operator, if you checked the Static IP option. - Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. If you want the address to be automatically assigned by the server, remove the check mark. - Server 1/Server 2: enter the Domain Name Server (DNS) addresses. - Traffic Class: select the traffic class. 4. Touch Save to save these settings. Note: The WAP settings may vary depending on the service provider. Mobile Web 137