Samsung SGH-A797 User Manual (user Manual) (ver.f12) (English) - Page 62
Network Profile Configuration - user manual
View all Samsung SGH-A797 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3. Touch Save . Network Profile Configuration Your phone is wirelessly connecting to the Internet via a built in WAP browser. Connection can be made via either one of three available WAP browsers: MEdia Net, AT&T MMS (MultiMedia Server), and AT&T IMS. These configurations are pre-configured and cannot be modified by the user. You need these settings to use the web browser or send MMS messages or Emails. Your phone is set up by default to connect to the internet. You can use this menu to create and customize the profiles containing the settings for connecting your phone to the network. Although the active connection can be changed by the user, it is recommended that this choice be made with the assistance of either the retailer or customer service representative. To create a new configuration, follow these steps: 1. From Idle mode, touch ➔ Settings ➔ Connectivity ➔ Network Profiles. 2. Touch . Create 3. Select the parameter you want to add or edit: • Set Name: enter a profile name. • Access Name: edit the access point name. 58 • Auth Type: select the type of authentication used for this WAP connection: None, Normal, or Secure. • User ID: enter the User ID required to connect to the network. • Password: enter the user password required to connect to the network. • Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or Other. • Home URL: enter the URL address of the page to be used as your homepage. • Proxy Address: MEdia Net set as the proxy server address and port. • Linger Time (sec.): set a time period (in seconds) after which the network is disconnected if there has been no new data traffic in that time. • Advanced Settings: allows you to configure some of the IP-specific information: Static IP, Static DNS, Server information, and Traffic Class. - Static IP: specify if you want to manually enter an IP address. If you want the IP address to be automatically assigned by the server, remove the check mark. - Static DNS: specify if you want to manually enter the Domain Name Server (DNS) address. If you want the address to be automatically assigned by the server, remove the check mark. - Traffic Class: select the traffic class.