Samsung SH85 User Manual

Samsung SH85 Manual

Samsung SH85 manual content summary:

  • Samsung SH85 | User Manual - Page 1
    either ‒‒ (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual). ‒‒ (b) you bring the unit to a repair center and there is no defect in the product (i.e. where you have failed to read this user
  • Samsung SH85 | User Manual - Page 2
    storage 4 Safety Precautions 4 Cleaning 5 Electricity and Safety 5 Installation 6 Operation 7 Preparations Parts 9 Control Panel 9 Direct Key guide 10 Function Key Guide 11 Changing Brightness, Contrast and Eye Saver Mode settings 13 Changing the Volume setting 13 Reverse
  • Samsung SH85 | User Manual - Page 3
    48 Information 48 Installing the Software Easy Setting Box 49 Restrictions and Problems with the Installation 49 System Requirements 49 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 50 Testing the Product 50 Checking the Resolution and Frequency
  • Samsung SH85 | User Manual - Page 4
    or fatal injury may result if instructions are not followed. Personal injury or damage to properties may result if instructions are not followed. 10 cm . ――Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.) Do not
  • Samsung SH85 | User Manual - Page 5
    Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. ――Hold the power cable by the plug and do not touch the cable with wet
  • Samsung SH85 | User Manual - Page 6
    , or a place where the product will operate continuously for an extended period of time) may seriously affect its performance. ‒‒ Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. 6
  • Samsung SH85 | User Manual - Page 7
    . •• If the product is dropped or the outer case is damaged, turn off the power and disconnect the power cord. Then contact Samsung Customer Service Center. ‒‒ Continued use can result in a fire or electric shock. •• Do not leave heavy objects or items that children like (toys, sweets, etc.) on
  • Samsung SH85 | User Manual - Page 8
    Caution •• Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ‒‒ Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time. •• Disconnect the power cord
  • Samsung SH85 | User Manual - Page 9
    subject to change without notice to improve quality. JOG Button UP Power LED LEFT PRESS(ENTER) DOWN RIGHT Icons JOG Button Power LED Function Key Guide Description Multi directional button that helps navigate. ――The JOG button is located on the rear left side of the product. The button can be
  • Samsung SH85 | User Manual - Page 10
    Direct Key guide ――The shortcut button screen (OSD menu) shown below is displayed only when the monitor screen is turned on, the Off Eye Saver Mode Volume Features Eye Saver Mode Off • • / : Adjust Brightness, Contrast, Eye Saver Mode. • • : Adjust Volume. • • : Display Function Key Guide. 10
  • Samsung SH85 | User Manual - Page 11
    be adjusted. PIP/PBP is available. Eye Saver Mode is available. Information can be viewed. Selects by moving the JOG button in the function key guide screen. Press the button when configuring settings for the PIP/PBP function is required. Selects to turn the Monitor off by moving the JOG button
  • Samsung SH85 | User Manual - Page 12
    When the monitor displays nothing (i.e. Power saving mode or Non-signal mode), 2 direct keys for control source and power could be used as below. JOG Button UP Power saving/Non-signal mode Source Change Down PRESS(ENTER) for 2 seconds Power Off When the monitor displays the Main menu the JOG
  • Samsung SH85 | User Manual - Page 13
    Mute? The function mutes the audio to improve sound effect when there is sound noise or when the input signal is weak, usually due to a problem with the volume of an input device. ――To activate the Mute function, access the Volume control screen, then use the JOG button to move the
  • Samsung SH85 | User Manual - Page 14
    Reverse Side ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Description Connect the power cord for your monitor to the POWER IN port on the back of the product. DP OUT Connects to another product using
  • Samsung SH85 | User Manual - Page 15
    Adjusting the Product Tilt and Height ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2.0° (±2.0°) ~ 92.0° (±2.0°) -45.0° (±2.0°) ~ 45.0° (±2.0°) Rotating the Monitor Screen ――You can rotate your monitor as shown
  • Samsung SH85 | User Manual - Page 16
    to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Precautions for moving the monitor •• Do not directly
  • Samsung SH85 | User Manual - Page 17
    Installing a Wall-mount Kit or Desktop Stand (S24H850QF* / S24H851QF*) ――Power the product off and remove the power cable from the power socket. 1 2 A 3 4 B Attach the wall-mount kit or desktop stand here Wall-mount bracket (optional) Align the grooves and tightly fasten the screws on the
  • Samsung SH85 | User Manual - Page 18
    Installing a Wall-mount Kit or Desktop Stand (S27H850QF* / S27H851QF*) ――Power the product off and remove the power cable from the power socket. 1 2 A 3 4 B Attach the wall-mount kit or desktop stand here Wall-mount bracket (optional) Align the grooves and tightly fasten the screws on the
  • Samsung SH85 | User Manual - Page 19
    Installation Attaching the Stand (S24H850QF* / S24H851QF*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 2 3 4 Insert the stand neck into the stand base in the
  • Samsung SH85 | User Manual - Page 20
    Attaching the Stand (S27H850QF* / S27H851QF*) ――Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ――The exterior may differ depending on the product. 1 2 3 4 Insert the stand neck into the stand base in the direction shown
  • Samsung SH85 | User Manual - Page 21
    Removing the Stand (S24H850QF* / S24H851QF*) ――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ――The exterior may differ depending on the product. 1 2 3 Place the product on a clean and flat floor as shown in Lift the stand
  • Samsung SH85 | User Manual - Page 22
    Removing the Stand (S27H850QF* / S27H851QF*) ――Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down. ――The exterior may differ depending on the product. 1 2 3 Place the product on a clean and flat floor as shown in Lift the stand
  • Samsung SH85 | User Manual - Page 23
    and external devices to the power outlet. 4 Read the user manual to familiarize yourself with the monitor functions, precautions, and proper @ 60 Hz, use an HDMI cable that supports 2560 x 1440 @ 60 Hz. Make sure that the graphics card of the HDMI source supports 2560 x 1440 @ 60 Hz. ――When
  • Samsung SH85 | User Manual - Page 24
    for the monitor and external devices, such as computers and set-top boxes, are not connected to the power outlet. ――The audio function is not supported if the source device is connected using the HDMI-DVI cable. ――The optimum resolution may not be available with an HDMI-DVI cable. ――When a device
  • Samsung SH85 | User Manual - Page 25
    Connection Using an DP Cable DP OUT ――To display 2560 x 1440 @ 60 Hz, use a DP cable that supports 2560 x 1440 @ 60 Hz. Make sure that the graphics card of the DP source supports 2560 x 1440 @ 60 Hz. ――A DP cable shorter under 1.5 m in length is recommended. Using a cable longer than 1.5 m can
  • Samsung SH85 | User Manual - Page 26
    will be affected by the USB device and your PC. ――The product does not support media play. If you need to play a file in your USB device, Hub to your PC and play the file on your PC. ――For USB-related problems caused by OS, drive programs or software, please contact relevant suppliers. ――With the
  • Samsung SH85 | User Manual - Page 27
    ――For an external mass-storage HDD requiring external power supply, be sure to connect it to a power source. ――The battery can be charged in the power-saving mode, but it cannot be charged when the product is powered off. ――Charging your USB device is not possible if the power cable is disconnected
  • Samsung SH85 | User Manual - Page 28
    Tidying Up the Connected Cables (S24H850QF* / S24H851QF*) 1 2 3 4 Stand assembly is complete. 5 Rotate the machine to the highest vertical position. Connect the cables to their correct ports, and then arrange each of the two cables through either side of the COVER-STAND CABLE, as shown in the
  • Samsung SH85 | User Manual - Page 29
    Tidying Up the Connected Cables (S27H850QF* / S27H851QF*) 1 2 3 44 Tilt the display, as shown in the figure. Rotate the machine to the highest vertical position. Connect the corresponding cables. 5 6 7 Arrange the cables through the groove on the COVER-REAR, and then attach the COVER-REAR
  • Samsung SH85 | User Manual - Page 30
    Connecting the Power POWER IN To use the product, connect the power cable to a power outlet and the POWER IN port on the product. ――The input voltage is switched automatically. 30
  • Samsung SH85 | User Manual - Page 31
    Correct posture to use the product Driver Installation ――You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ――To install the latest version of the product driver, download it from the Samsung Electronics website at http://www.samsung.com.
  • Samsung SH85 | User Manual - Page 32
    Chapter 04 Screen Setup Configure the screen settings such as brightness. A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown.
  • Samsung SH85 | User Manual - Page 33
    Brightness You can adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. ――This menu is not available when MSAMASGUNICGBright is set to Dynamic Contrast mode. ――This menu is not available when Smart ECO Saving is enabled. ――This menu is
  • Samsung SH85 | User Manual - Page 34
    SAMSUNG MAGIC Upscale Eye Saver Mode MSAMASGUNICGUpscale function can enhance the layers of the picture details and the vividness of the picture. The function has more obvious effects on low-resolution pictures. ――This menu is not available when MSAMASGUNICGBright is set to Cinema or Dynamic
  • Samsung SH85 | User Manual - Page 35
    aspect ratio without cutting off. ――The function may not be supported depending on the ports provided with the product. ――Changing the screen 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.). ――This can only be set when the external input is
  • Samsung SH85 | User Manual - Page 36
    blank in PIP/PBP mode when the optimum resolution is selected, go to Control Panel → Display → Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.) If the screen is blank when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024. ――The
  • Samsung SH85 | User Manual - Page 37
    Size Sound Source Select the size and aspect ratio of the sub-screen. •• : Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1280 x 1440 (width x height). •• : Select the icon image if you want to use PIP mode where
  • Samsung SH85 | User Manual - Page 38
    are the same, the operation cannot be performed. ――When the Function Key Guide appears, move the JOG button LEFT to select the JOG button. The 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.). ――This can only be set when the external input
  • Samsung SH85 | User Manual - Page 39
    ratio without cutting anything off. ――The function may not be supported depending on the ports provided with the product. ――Changing the 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of these signals.). ――This can only be set when the external input is
  • Samsung SH85 | User Manual - Page 40
    Chapter 06 Adjusting OSD (On Screen Display) settings A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to
  • Samsung SH85 | User Manual - Page 41
    Chapter 07 Setup and Reset A detailed description of each function is provided. Refer to your product for details. ――The functions available may vary depending on the product model. The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to
  • Samsung SH85 | User Manual - Page 42
    graphics card manufacturer. •• The output mode of DP OUT varies with the settings of DisplayPort Ver. When DisplayPort Ver. is set to 1.1, DP OUT only supports SST. •• When connecting a PC using DP cable, you must set DP OUT mode to "DisplayPort: MST (SST)" on the OSD menu. (OSD - System - DP OUT
  • Samsung SH85 | User Manual - Page 43
    1 Monitor 2 SST USB Type-C Cable Screen A DP OUT DP Cable Screen A DP IN OSD → USB Type-C:SST •• Make sure that the graphics card supports the MST (Daisy Chain) function. To check this, visit the website of the graphics card manufacturer. •• When connecting a PC using USB Type-C cable, you
  • Samsung SH85 | User Manual - Page 44
    the graphics card manufacturer to check and update its driver with the latest version. •• A Samsung branded cable is recommended. When the MST function is not supported 1 Make sure that the cable is connected correctly and DP OUT mode is set correctly on the OSD menu. Refer to DP OUT (MST/SST
  • Samsung SH85 | User Manual - Page 45
    . •• The sound quality of the monitor may be degraded. ――If you encounter any issues when using the function, contact the Samsung Service Center. The models in the Graphic Cards list supports FreeSync FreeSync can only be used with specific AMD graphics card models. Refer to the following list for
  • Samsung SH85 | User Manual - Page 46
    46
  • Samsung SH85 | User Manual - Page 47
    Smart ECO Saving PC/AV Mode The Smart ECO Saving function reduces power consumption by controlling the electric current used by the monitor panel. ――This menu is not available when Eye Saver Mode is enabled. •• Off: Deactivate the Smart ECO Saving function. •• On: The power consumption will
  • Samsung SH85 | User Manual - Page 48
    Source Detection Select either Auto or Manual as the method to recognize input signal. ――This menu is not available when the MST mode is selected for DP OUT. Information View the current
  • Samsung SH85 | User Manual - Page 49
    on the computer system and the product specifications. ――If the shortcut icon does not appear, press the F5 key. Restrictions and Problems with the Installation The Easy Setting Box installation may be affected by the Graphics Card, Motherboard and the Networking Environment. System Requirements
  • Samsung SH85 | User Manual - Page 50
    Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center ――Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service a mode that exceeds the supported resolution(refer to Standard Signal Mode
  • Samsung SH85 | User Manual - Page 51
    change the settings, referring to Standard Signal Mode Table (P.54) in this manual and the Information menu on the product. The screen is too bright. . If a beeping sound is heard when your PC is booting, have your PC serviced. ――The LED lights on the frame of the product may be seen depending on
  • Samsung SH85 | User Manual - Page 52
    Q & A ――Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. •• Windows XP: Go to Control Panel → Appearance and Themes → Display → Settings →
  • Samsung SH85 | User Manual - Page 53
    Chapter 10 Specifications General Model Name S24H850QF* / S24H851QF* S27H850QF* / S27H851QF* Size 24 Class (23.8 Inches / 60.4 cm) 27 Class (26.9 Inches / 68.4 cm) Display area 526.848 mm (H) x 296.352 mm (V) 596.74 mm (H) x 335.66 mm (V) 20.7 Inches (H) x 11.7 Inches (V) 23.5 Inches (H)
  • Samsung SH85 | User Manual - Page 54
    even though the power LED turns on. In such a case, change the settings according to the following table by referring to the graphics card user manual. Resolution IBM, 720 x 400 VESA, 640 x 480 MAC, 640 x 480 VESA, 640 x 480 VESA, 640 x 480 VESA, 800 x 600 VESA, 800 x 600 VESA, 800 x 600
  • Samsung SH85 | User Manual - Page 55
    Resolution VESA, 1280 x 1024 VESA, 1440 x 900 VESA, 1600 x 900RB VESA, 1680 x 1050 VESA, 1920 x 1080 VESA, 2560 x 1440 Horizontal Frequency (kHz) 79.976 55.935 60.000 65.290 67.500 88.787 Vertical Frequency (Hz) 75.025 59.887 60.000 59.954 60.000 59.951 Pixel Clock (MHz) 135.000 106.500 108.000
  • Samsung SH85 | User Manual - Page 56
    , Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without non-authorized electrical connections. •• Not following the "cautions" in User Manual. Others •• If product fails by natural disaster. (lightning, fire,
  • Samsung SH85 | User Manual - Page 57
    . Samsung guarantee that replacement parts will be available for 5 years after the end of production. After 5 years, in the event that the Samsung's service center has run out of replacement parts and cannot repair the product, Samsung will replace your product at no additional charge. If the model
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

User Manual
The color and the appearance may differ depending on the product, and the specifications are subject to change without
prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.
S*H85*
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual).
(b) you bring the unit to a repair center and there is no defect in the product
(i.e. where you have failed to read this user manual).
The amount of such administration charge will be advised to you before any work or home visit is carried out.