Samsung SP-F10 User Manual

Samsung SP-F10 Manual

Get Samsung SP-F10 PDF manuals and user guides View all Samsung SP-F10 manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung SP-F10 manual content summary:

  • Samsung SP-F10 | User Manual - Page 1
    SP-F10 SP-F10M Multimedia Projector Owner's Instructions The color and the appearance of the product may differ from the illustrations in this manual. The specifications are subject to change without prior notice to improve performance.
  • Samsung SP-F10 | User Manual - Page 2
    Menu (OSD: On Screen Display) . . . . 3-5 Network Management 3-6 MEDIA PLAY FUNCTION (ONLY FOR SP-F10M) Connecting a USB Storage Device and Precautions 4-1 Documents 4-2 Photo 4-3 Music 4-4 Movie 4-5 Settings 4-6 Supported File Formats 4-7 TROUBLESHOOTING Before Requesting Service 5-1
  • Samsung SP-F10 | User Manual - Page 3
    MORE INFORMATION Specifications 6-1 RS-232C Command Table 6-2 Contact SAMSUNG WORLDWIDE 6-3 Correct Disposal - Europe only 6-4
  • Samsung SP-F10 | User Manual - Page 4
    of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice Copyright © 2010 Samsung Electronics Co., Ltd. All rights reserved. The copyright of this manual is reserved by Samsung Electronics, Co., Ltd. The contents of this
  • Samsung SP-F10 | User Manual - Page 5
    shock, or a problem with the product. • A white stain may appear on the surface of the projector if water gets on it. The appearance and the color may differ depending on the model. Cleaning Inside the Projector For cleaning the interior of the projector, contact an authorized Samsung Service Center
  • Samsung SP-F10 | User Manual - Page 6
    1-3 Safety Precautions Icons used for safety precautions ICON NAME Warning Caution MEANING Failing to follow the precautions marked with this sign may result in a serious injury or even a fatality. Failing to follow the precautions marked with this sign may result in a personal injury or
  • Samsung SP-F10 | User Manual - Page 7
    the power plug to a wall outlet that can be easily reached. • When a problem occurs with the product, you must unplug the power plug to cut the power off or shelf, take care so that the front end of the product is completely supported by the cabinet or shelf. • Failing to do so may result in the
  • Samsung SP-F10 | User Manual - Page 8
    ports, etc). • If water or an alien substance enters the product, turn the power off, unplug the power cord and contact a service center. • Otherwise, it may result in a problem with the product, electric shock or fire. Do not disassemble, or attempt to fix or modify the product. • When the product
  • Samsung SP-F10 | User Manual - Page 9
    generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment Service Center to clean the interior of the projector at least once per year. 1-3
  • Samsung SP-F10 | User Manual - Page 10
    LED. Do not open any cover on the product. • This would prove hazardous because of high-voltage current inside the product. Be careful not to touch the ventilation hole while the projector alcohol on any plastic part of the product such as projector case, since this may cause damage. Do not use any
  • Samsung SP-F10 | User Manual - Page 11
    product at a later date. Projector CONTENTS Quick Setup Guide Warranty Card (Not available in all locations) User Manual Power Cord Remote Control / 2 Batteries (Only for SP-F10M) ( Not available in all locations) Remote Control / 1 Battery (Only for SP-F10) ( Not available in all locations
  • Samsung SP-F10 | User Manual - Page 12
    transparent screen, you can use the menu to adjust the picture so that it displays correctly, depending on where you've located the projector, rearfloor (or low) or rear-ceiling. 1. For rear-floor, press : Menu > Setup > Install > Rear-Floor 2. For rear-ceiling, press : Menu > Setup > Install > Rear
  • Samsung SP-F10 | User Manual - Page 13
    2-3 Leveling with Adjustable Feet Press the PUSH buttons, as shown, to adjust the legs and level the projector. The projector can be adjusted to a height of up to 1.18 inches (30mm, about 12 °) from the reference point. If is set to ,
  • Samsung SP-F10 | User Manual - Page 14
    the picture on the screen using the Focus Ring. The size of your screen determines the distance you set your projector from the screen. If you do not install your projector at the projection distance specified in the Screen Size and Projection Distance table in Section 2-5, you will not be able
  • Samsung SP-F10 | User Manual - Page 15
    clear, adjust them using the Zoom Knob or Focus Ring, or move the projector forward and backward. M (DIAGONAL) INCHES / CM 40 / 101.6 50 / 7.6 3.6 / 9.1 4.2 / 10.7 4.8 / 12.2 5.4 / 13.7 6.0 / 15.2 6.6 / 16.8 7.2 / 18.3 7.8 / 19.8 8.4 / 21.3 9.0 / 22.9 9.6 / 24.4 10.2 / 25.9 10.8 / 27.4 11.4 / 29.0
  • Samsung SP-F10 | User Manual - Page 16
    .2 Z (TELE) INCHES / CM 384 / 976.6 399 / 1012.7 413 / 1048.9 427 / 1085.1 Z (WIDE) INCHES / CM 320 / 812.0 332 / 842.1 343 / 872.1 355 / 902.2 This projector is designed to show images optimally on a 80 ~ 120 inch sized screen. OFFSET Y' INCHES / CM 16.2 / 41.1 16.8 / 42.7 17.4 / 44.2 18.0 / 45
  • Samsung SP-F10 | User Manual - Page 17
    2-6 Ventilation openings For the location of the ventilation openings, see the picture below: • Do not block the ventilation openings. Blocking the ventilation openings can cause your projector to overheat and may cause it to fail. Air outtake vent Air intake vent Installation and Connection 2-6
  • Samsung SP-F10 | User Manual - Page 18
    LAN port 2. S-VIDEO IN port 3. AUDIO OUT port 4. PC OUT port 5. HDMI/DVI IN port 6. Remote Control Signal Receiver 7. USB port (Only for SP-F10M) 8. Kensington Lock slot 9. Power port 10. PC IN port 11. RS-232C port 12. [AV IN] VIDEO port 13. [AV IN] L-AUDIO-R port 2-7 Installation and Connection
  • Samsung SP-F10 | User Manual - Page 19
    2-8 Supported Display Modes PC Timing (D-Sub/HDMI) FORMAT IBM IBM IBM VESA MAC VESA VESA VESA VESA VESA VESA VESA VESA VESA MAC VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA RESOLUTION 640 x 350 640 x 480 720 x 400 640 x 480 640 x 480 640 x 480
  • Samsung SP-F10 | User Manual - Page 20
    projector. If the resolution of the signal output by the PC matches the real resolution (1024x768) of the projector,the screen quality is optimal. AV Progressive Interlaced Progressive Progressive Progressive Interlaced Interlaced AV Timing (HDMI) FORMAT RESOLUTION EIA-861 EIA-861 EIA-861 EIA
  • Samsung SP-F10 | User Manual - Page 21
    FORMAT RESOLUTION EIA-861 EIA-861 EIA-861 EIA-861 Format5 Format17,18 Format19 Format20 FREQUENCY (MHZ) 74.250 27.000 74.250 74.250 AV Timing (VIDEO/S-VIDEO) NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM Your projector supports the standard video formats listed above through its video and s-
  • Samsung SP-F10 | User Manual - Page 22
    2-9 Connecting the Power The appearance and the color may differ depending on the model. • Plug the power cord into the power terminal on the rear side of the projector. 2-9 Installation and Connection
  • Samsung SP-F10 | User Manual - Page 23
    ]. The dialog appears. 2. Click the [Settings] tab, and then set the . The optimal resolution for the projector is 1024 x 768. For other resolutions supported by the projector, see the PC Timing Display Mode table in section 2-8. You do not have to change the
  • Samsung SP-F10 | User Manual - Page 24
    on the monitor manufacturer or Windows version. When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by this projector. If it does not, you may have signal problems. 2-10-2. Connecting with a PC The appearance and the color may differ
  • Samsung SP-F10 | User Manual - Page 25
    PC using a PC video cable. 2. Plug in the power cords of the projector and the PC. 3. Connect the [AV IN (L-AUDIO-R)] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and play. If you use Windows XP, you do not need to
  • Samsung SP-F10 | User Manual - Page 26
    of your PC, use an HDMI/HDMI cable (Not supplied). - For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes". 2. If you connected using a HDMI/DVI cable, connect the [AV IN (L-AUDIO-R)] terminal of the projector to the Audio out terminal
  • Samsung SP-F10 | User Manual - Page 27
    projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI or HDMI/HDMI cable. - If you are connecting to the HDMI output terminal on the digital output device, use an HDMI/HDMI cable. - For supported input signal formats, resolutions, and frequencies, see AV
  • Samsung SP-F10 | User Manual - Page 28
    [PC IN] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2. Connect the [AV IN (L-AUDIO-R)] terminal at the back of
  • Samsung SP-F10 | User Manual - Page 29
    RCA jacks on the other. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2. Connect the [AV IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an audio cable (Not
  • Samsung SP-F10 | User Manual - Page 30
    ) or S-Video cable (Not supplied). - For supported input signal formats, see AV Timing (VIDEO/S-VIDEO ) in section 2-8, "Supported Display Modes". 2. Connect the [AV IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an audio cable (Not supplied
  • Samsung SP-F10 | User Manual - Page 31
    to the D-Sub (PC, VGA) terminal of your PC using a D-Sub cable. 2. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable. - When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [
  • Samsung SP-F10 | User Manual - Page 32
    . 1. Obtain an audio cable (Not supplied) suitable for your external speaker. 2. Connect the [AUDIO OUT] terminal of the projector to the external speaker using an audio cable. - When using an external speaker, the internal speaker does not operate but you can adjust the volume
  • Samsung SP-F10 | User Manual - Page 33
    modem for more than 10 seconds, restart the modem, and then retry the connection. • For instructions on the setup and connection of the external modem and router, refer to the user manual for each product. • You can connect the LAN cable from the modem directly to the projector, You do not need
  • Samsung SP-F10 | User Manual - Page 34
    router's user manual. • You can connect the LAN cable directly to the projector without using a router. • If you use an IP Router which supports the DHCP function, you can set the router to either DHCP or static IP. • For instructions on the use of a static IP, consult your Internet service provider
  • Samsung SP-F10 | User Manual - Page 35
    the locking device into the Kensington lock hole in the projector. 3. Insert the Kensington lock key into the locking mechanism and turn it in the locking direction. • These are general instructions. For exact instructions, see the User Manual supplied with the locking device. • You can purchase the
  • Samsung SP-F10 | User Manual - Page 36
    User adjustments • Allows adjustment of each input port. • Equipped with an internal Test Pattern you can use to install and adjust the projector. 7. Convenient Network Function • You can monitor and control the projector from a PC using the network function. 8. Multimedia Function (Only for SP-F10M
  • Samsung SP-F10 | User Manual - Page 37
    DESCRIPTION - STAND BY (Blue LED) - LED (Blue LED) - STATUS (Green/Red LED) Refer to the LED Indications. 2. Move / Select 10. Hole for attaching lens cap string : Use to adjust the volume. Use to display the Menu Screen. Use to select the external device signal. Use to turn the projector
  • Samsung SP-F10 | User Manual - Page 38
    control up to a distance of about 32.8 feet (10 m) from the product. SP-F10 POWER ( ) Button Use this button for turning the to adjust the image so that it is appropriate for the projector's installation location (In front of the screen and hangng from LED runtime. ) when the sound is 3-3 Using
  • Samsung SP-F10 | User Manual - Page 39
    select the connection status of external devices. P.MODE Button Use to select Picture Mode. STILL Button Use to see still images. SP-F10M POWER ( ) Button Use to turn the projector on and off. P.MODE Button Use to select Picture Mode. P.SIZE Button Use to adjust the size of picture screen. Rewind
  • Samsung SP-F10 | User Manual - Page 40
    signals, picture setup, PC screen adjustment, and LED runtime. Colored buttons (Only available in < projector's installation location (In front of the screen and hanging from the ceiling, behind the screen and hanging from the ceiling, etc.) Installing Batteries in the Remote Control SP-F10 SP-F10M
  • Samsung SP-F10 | User Manual - Page 41
    LED STAND BY STATUS Power has been supplied properly. To operate the projector, press the [POWER] button on the projector or remote control and wait for around 30 seconds. The projector is operating normally. The projector in Clearing Indicator Problems below. The projector has turned itself
  • Samsung SP-F10 | User Manual - Page 42
    of time after a shutdown, or an LED operation error has occurred. Turn the power off, wait for a sufficient amount of cooling time and then turn the power on to operate. If the same problem occurs continually, contact a Samsung service center. This Projector uses a cooling fan system to keep the
  • Samsung SP-F10 | User Manual - Page 43
    Setup Option Source List Mode Overscan Install Test Pattern Language Melody Edit Name Size Film Mode LED Mode Video Type Menu Option Security Position a device connected to the projector to display. SP-F10 : --- SP-F10M : ---- You can
  • Samsung SP-F10 | User Manual - Page 44
    input signal is PC Timing(D-Sub/HDMI), AV Timing(VIDEO/SVIDEO)'s PAL and SECAM signal of the White level. LED can represent. • : This stands for Standard Red Green Blue. Pictures are displayed using standard RGB according to your preferences using the → OSD. : Restores the
  • Samsung SP-F10 | User Manual - Page 45
    RGB signal of mode. • : Used in a normal environment. • : Used when the dark parts of an image are too bright. Using this function, you can cut off the edge of a picture when unnecessary information or images appear on the edge of the picture. Overscan is not supported in [AV
  • Samsung SP-F10 | User Manual - Page 46
    enabled when the input signal is a PC Timing (D-Sub/HDMI) signal. Dynamic Contrast Dynamic Contrast automatically adjusts the picture contrast adjusting the amount of light generated by the LED. • : This function. The sound output of your projector is temporarily stopped while the keystone is
  • Samsung SP-F10 | User Manual - Page 47
    you manually set the input signal. This function does not work in mode. • In mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal. • --- • In
  • Samsung SP-F10 | User Manual - Page 48
    fails toenter the mode due to a mode error. (Only for SP-F10M) Activated only in Mode. • : When the projector is turned off during a firmware update, use this function to continue the update. • - Under normal usage, update by
  • Samsung SP-F10 | User Manual - Page 49
    . • Use the displayed number keys to enter or change the password. • If you forgot your password, contact a Samsung service center. You can disable the buttons on the projector body so that the projector can only be operated by the remote control. • - You can check external source signals
  • Samsung SP-F10 | User Manual - Page 50
    To control multiple projectors from a single PC, install and run Samsung Projector Manager. For information about Samsung Projector Manager, go to 10MB • Hard Disk capacity: More than 10MB • Display resolution: More than 640 x 480 • Supported OS : Microsoft Windows XP, Windows Vista • Web browser
  • Samsung SP-F10 | User Manual - Page 51
    capacity: More than 10MB • Display resolution: More than 640 x 480 • Supported OS : Microsoft Windows XP, Windows Vista 1. Installing the Samsung Projector Manager • Click 'Samsung Projector Manager' on the CD supplied. • Install according to the instructions displayed on the PC screen. 2. Running
  • Samsung SP-F10 | User Manual - Page 52
    , check if the network connection and the network settings are properly configured. See section 2-18, Connecting to a Network and section 3-5-3, → for information and instructions. To save or load the registered projector's information, select →. 3-6 Using
  • Samsung SP-F10 | User Manual - Page 53
    by icons), etc. in real time. Samsung Projector Manager displays icons that indicate a projector's status. The icons are listed in the tables below. If the icons indicate a problem with your projector, see "Clearing Indicator Problems" in secton 3-4, LED Indications. Warning and Error status icons
  • Samsung SP-F10 | User Manual - Page 54
    in the monitoring window) (Refresh): Updates the status of the projector. (Power On): Turns on the power of the projector. (Power Off): Turns off the power of the projector. (Switch Source): Selects a source from HDMI, S-VIDEO, AV, PC, MP. (Blank Off/Blank On): Turns the screen of the
  • Samsung SP-F10 | User Manual - Page 55
    network connection (see section 2-18, Connecting to a Network) and network settings (see 3-5-3, Setup > Network) are correctly configured. Operating one projector using both Samsung Projector Manager and the at the same time may cause a slowdown in PC operation or an error. Using 3-6
  • Samsung SP-F10 | User Manual - Page 56
    a new schedule, follow these steps: 1. Press the button. The New Schedule screen appears. 2. Select the projectors to apply the new schedule to from the field. When you select a projector, a check mark appears in the check box to its left. 3. Set the
  • Samsung SP-F10 | User Manual - Page 57
    will be minimized to the system tray. contains two selections. - →: Saves all of the configured settings under Samsung Projector Manager in the desired file names to the corresponding folders. - →: Imports a saved Configuration file. Sets the
  • Samsung SP-F10 | User Manual - Page 58
    4 Media Play Function (Only for SP-F10M) 4-1 Connecting a USB Storage Device and Precautions 4-1-1. Connecting a USB Device The appearance and the color may differ depending on the model. 1. Connect your USB storage device to the USB port on the back of the projector. - The main page of the
  • Samsung SP-F10 | User Manual - Page 59
    not supported. •If an external memory device does not operate after you've connected it to the projector, try to connect it to a PC. If it still does not operate normally, contact the memory device's manufacturer service center or related customer center. Media Play Function (Only for SP-F10M) 4-1
  • Samsung SP-F10 | User Manual - Page 60
    Menu displayed when you are viewing a document Select the file you want using the ▲/▼ buttons on the projector or remote control. Using the remote control while viewing a document • MEDIA.P : Open the document menu document, the following menu appears. 4-2 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 61
    linked video file must be in the same folder as the corresponding document file • For supported file formats, refer to the "4-7 Supported File Formats" section. • Loading time may be longer for large files. • This product much data to display on a screen. Media Play Function (Only for SP-F10M) 4-2
  • Samsung SP-F10 | User Manual - Page 62
    to the MS Word manual for more information on the layout properties.) • This product does not support some functions found in original files. For example, the animation function in a PowerPoint file. • This product does not support encrypted files (DRM). 4-2 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 63
    image as the projector logo. • To use this option, press [MENU] and go to . Check that is set to . • The recommended resolution for a picture to be set as the user logo is 600x300 device in the order of presentation. Media Play Function (Only for SP-F10M) 4-3
  • Samsung SP-F10 | User Manual - Page 64
    > - : Selects manual (view one by one) or auto (slideshow) play. • - If you selected , move between photos using the buttons on the projector or the / buttons on the remote control the main page of . 4-3 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 65
    . Set as custom logo Sets the selected image as the projector logo. • To use this option, press [MENU] and go to . Check that is set to . • The recommended resolution for a picture to be set as the user logo is 600x300. Media Play Function (Only for SP-F10M) 4-3
  • Samsung SP-F10 | User Manual - Page 66
    connected to the projector, files on the external memory device can be copied to the projector's internal memory and vice versa. Copy all files to internal or external memory. Deletes a selected music file. Deletes all music files in a USB storage device. 4-4 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 67
    Menu displayed when playing music. Select the file you want using the ▲/▼ buttons on the projector or remote control. Using the remote control while playing music • MEDIA.P : Open the music . • : Plays a selected music file repeatedly. Media Play Function (Only for SP-F10M) 4-4
  • Samsung SP-F10 | User Manual - Page 68
    USB memory device is connected to the projector, files on the external memory device can be copied to the projector's internal memory and vice versa. Copy all files to internal or external memory. Delete the selected file. Delete all files in a folder. 4-5 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 69
    the file you want using the ▲/▼ buttons on the projector or remote control. Using the remote control while playing video > Not supported for video files with internal subtitles. Change the screen aspect ratio settings. • - - Media Play Function (Only for SP-F10M) 4-5
  • Samsung SP-F10 | User Manual - Page 70
    resolution and then copy. : To send inquiries and requests for questions regarding open sources, contact Samsung via Email(vdswmanager@samsung for the projector when you use the VOD (Video on Demand) service provided by (VOD) content. To generate the registration code, locate
  • Samsung SP-F10 | User Manual - Page 71
    copyright information of the projector. Safely Remove USB Remove your USB device safely. If the message appears, remove the USB device. 4-6-1. Firmware Update Download the latest firmware version from the Samsung Electronics website (http://www.samsung.com) and install
  • Samsung SP-F10 | User Manual - Page 72
    Windows Media Video 9 MPEG1 Resolution: 720 X 480 Frame/sec: 30 Mbps: 8 AUDIO CODEC Supported Format MP3 AC3 ADPCM (MULAW,ALAW) AAC HE_AAC(AAC+) WMA Audio sampling rate : 8000 11025 12000 16000 22050 24000 32000 44100 48000 Supported Subtitile formats 4-7 Media Play Function (Only for SP-F10M)
  • Samsung SP-F10 | User Manual - Page 73
    SAMI SubRip SubViewer Micro DVD NAME FILE EXTENSION .smi .srt .sub .sub or .txt FORMAT HTML string-based string-based string-based Media Play Function (Only for SP-F10M) 4-7
  • Samsung SP-F10 | User Manual - Page 74
    Troubleshooting 5-1 Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. Installation and Connection Symptoms No Power. I want to install my projector feet(10 m).
  • Samsung SP-F10 | User Manual - Page 75
    noise. An operating LED is lit up. Lines appear on screen. No external device screen is displayed. Only a blue screen appears. Screen appears in black and white or in an odd color, or the screen is too dark or bright. Troubleshooting Be sure that the power cord of the projector is connected. Be
  • Samsung SP-F10 | User Manual - Page 76
    when the PC (server) has more than two network cards. Installation of Samsung Projector Manager has Check Samsung Projector Manager's system requirements for failed. PCs. The projector will not connect to Samsung Projector Manager. 1. Check if the and network connection between the
  • Samsung SP-F10 | User Manual - Page 77
    Symptoms Troubleshooting Media Play Function (Only for SP-F10M) I hear no sound when playing a video file from my USB storage device. Check the audio format of the video file. Sound is not available for non-supported formats such as AC3, etc. Convert the audio format into a supported format
  • Samsung SP-F10 | User Manual - Page 78
    Adjustment Lens Zoom Ratio Input signal D-Sub 15p HDMI Mini DIN x 1 RCA x 1 Media Play Output signal D-Sub 15p Audio Speaker User Environment Temperature and Humidity Noise SP-F10 SP-F10M 0.78 inches 3P LCD XGA (1024 x 768) LED 4:3 255W (based on 220v) (Standby : under 1W) 100
  • Samsung SP-F10 | User Manual - Page 79
    all areas. (Class B equipment emits less electromagnetic waves than Class A equipment.) The LCD panel used in the LCD projector consists of hundreds of thousands of fine pixels. Like other video display devices, the LCD panel may contain bad pixels which do not operate. When shipping a product, the
  • Samsung SP-F10 | User Manual - Page 80
    0x08 and 0x22 signify that the packet is for serial communication. • The following 4 bytes represent a pre-defined command that can be defined by the user. • The last byte is the checksum which checks the validity of the current packet. • Header [2 Byte]: Pre-defined values fixed to 0x08 and 0x22
  • Samsung SP-F10 | User Manual - Page 81
    OSD 0x00 / Power On OK Cancel Direct Power Off 0x01 Up Down On 0x02 Off On 0x03 Off On 0x04 Off (0~9) Keypad 0x05 AV 0x0A S-Video PC HDMI Media Play CMD2 0x00 0x00 0x00 0x00 0x00 0x00 0x00 CMD3 0x00 0x00 0x01 0x02 0x00 0x00 0x00 0x00 0x01 0x02 0x03 0x04 0x05
  • Samsung SP-F10 | User Manual - Page 82
    Picture CONTROL ITEM Mode Dynamic Standard Presentation Text Movie Game Bright User Contrast 0~100 Brightness 0~100 Sharpness 0~100 Color 0~100 Tint (G/R) G50 / R50 Color Tone Cool2 Cool1 Warm1 Warm2 CMD1 0x0B CMD2 0X00 0X02 0X03 0X04 0X05
  • Samsung SP-F10 | User Manual - Page 83
    Picture CONTROL ITEM WB R offset G offset B offset R gain G gain B gain Gamma -3~3 Save Display OSD OK Cancel Direct Save Reset Size Normal Zoom1 Zoom2 16:9 Digital NR Off On Black Level 0 IRE/NORMAL 7.5 IRE/LOW Overscan Off On Film Mode Off Auto PC Auto adjust-
  • Samsung SP-F10 | User Manual - Page 84
    Picture CONTROL ITEM Zoom x1 x2 x4 x8 LEFT RIGHT Up Down Horizontal Position Continuous Vertical Posi- Continuous tion Color Gamut Wide Normal SRGB Dynamic Off Contrast On LEFT RIGHT DOWN Up CMD1 0x0B CMD2 0x18 0x19 0x1A 0x1B 0x1D 0x1E CMD3 0x00 0x00 0x00 0x00 0x00 0x00 VALUE
  • Samsung SP-F10 | User Manual - Page 85
    -Ceiling Rear-Floor Rear-Ceiling LED Mode ECO Bright Keystone V-Keystone -50~50 Auto Key- Off stone On Background Logo Blue Black Custom Logo Test Pattern Crosshatch Screen size Pattern Off Video Type Auto RGB(PC) RGB(AV) YPbPr(AV) PC AV Reset Factory Default Display OSD
  • Samsung SP-F10 | User Manual - Page 86
    Setup CONTROL ITEM Caption Caption Mode Channel Field Network Network IP Setting Server IP Setting Off On Caption Text 1 2 1 2 Off On Automatic Manual IP Address CMD1 0x0C 0x0E Subnet Mask Gateway Server IP CMD2 0x07 0x01 0x02 0x03 0x04 0x05 0x06 CMD3 0x00 0x01 0x02 0x03 0x00 0x00
  • Samsung SP-F10 | User Manual - Page 87
    Español Français Italiano Svenska Português 中国语 한국어 Türkçe ไทย Menu Option Position LEFT RIGHT UP DOWN Transparency High Medium Low Opaque Display Time 5 sec 10 sec 30 sec 60 sec 90 sec 120 sec Stay On CMD1 0x0D CMD2 0x00 0x01 0x02 0x03 CMD3 0x00 0x00 0x00 0x00 VALUE
  • Samsung SP-F10 | User Manual - Page 88
    Option CONTROL ITEM SOUND 100Hz 300Hz 1KHz 3KHz 10KHz Auto Power ON Sleep Timer Information PanelLock Melody Off On Off 10 min 20 min 30 min Off On Off Low Medium High Up Down Up Down Up Down Up Down Up Down CMD1 0x0D CMD2 0x04
  • Samsung SP-F10 | User Manual - Page 89
    1-800-10-7267 800-6225 1-800-299-0013 800-7919267 1-800-234-7267 00-1800-5077267 800-7267 1-800-682-3180 1-800-751-2676 1-800-SAMSUNG(726-7864) 0-800-100-5303 http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com
  • Samsung SP-F10 | User Manual - Page 90
    -500 00-800-500-55-500 8-800-555-55-55 8-10-800-500-55-500 0-800-502-000 8-10-800-500-55-500 http://www.samsung.com http://www.samsung.com http://www.samsung.com http://www.samsung.com/ua http://www.samsung.com/ua_ru http://www.samsung.com ASIA PACIFIC 1300 362 603 400-810-5858 010
  • Samsung SP-F10 | User Manual - Page 91
    3000 8282 1800 266 8282 0800-112-8888 021-5699-7777 0120-327-527 1800-88-9999 0800 SAMSUNG (0800 726 786) 1-800-10-SAMSUNG(726-7864) 1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777 1800-SAMSUNG(726-7864) 0800-329-999 1800-29-3232 02-689-3232 1 800 588 889 MIDDLE EAST & AFRICA
  • Samsung SP-F10 | User Manual - Page 92
    they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
SP-F10 SP-F10M
Multimedia Projector
Owner’s Instructions
The color and the appearance of the product may differ
from the illustrations in this manual. The specifications are
subject to change without prior notice to improve
performance.