Samsung SP-L300 User Manual (user Manual) (ver.1.0) (English)
Samsung SP-L300 Manual
View all Samsung SP-L300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung SP-L300 manual content summary:
- Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 1
- Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 2
. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | [The images here are for reference only, and are not applicable in all cases (or countries).] Insert the - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 3
Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it. z There is a danger of fire. Unplug the power plug before cleaning the product. z There is a danger of electric shock or fire. | Power Related | Installation Related | Cleaning and Use Related | TO - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 4
location as the front part is heavy. In case of thunder/lightning, disconnect the power cord from may cause damage or injury. Do not drop the product while carrying it. z Doing so may cause damage or injury. Keep outlet and contact a Service Center. Do not disassemble, or attempt to fix or - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 5
, the product may fall and cause harm. Do not look directly at the light of the lamp nor project the picture onto eyes. z This is dangerous especially for children. When you remove batteries from the remote, be careful that they are not swallowed by children. Keep batteries out of the reach of - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 6
casing is damaged, turn the product off and unplug the power cord. z This may cause electric shock or fire. Contact a Service your remote control on a table or desk. z If you step on the remote control recycling. Business users should contact their on the battery, manual or packaging indicates that - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 7
right and left and a 5-band equalizer is supported. User adjustments - This unit allows adjustment of each input port. - The unit has a reference pattern that can be used for positioning and adjustment. Front/Upper Side | Product Features | Product Views | Remote Control | Product Specifications | - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 8
turn the projector on or off. - LAMP (Blue LED) - TEMP (Red LED) 6. Lens ※ Refer to the LED Indications. 2. VOL - / + & Select and Move Button 7. Remote Control Signal . Unpacking Quick Installation Guide Warranty Card/ Registration Card (Not available in all locations) User Manual CD - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 9
●:Light is On ◐:Light is Blinking ○:Light is Off STAND LAMP BY TEMP Information ● ○ If you press the POWER button on the remote control or projector, the screen ○ appears within 30 seconds. ● ● ○ The projector is in normal operating condition. ● ◐ This state appears when the - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 10
the same problem occurs continually, contact your product distributor or service center. When the screen becomes darker Check the lamp usage time on the Information Display screen. If you need to replace the lamp, contact your product distributor or service center. This Projector uses a cooling - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 11
service input terminals) 11.Remote Control Signal Receiver 6. [AV IN] R-AUDIO-L Input port 12.POWER Input port | Product Features | Product Views | Remote Control | Product Specifications Button 1. POWER ( ) Used to turn on the projector. 2. AUTO Adjusts the Picture automatically. (Available in PC - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 12
may be modified without prior notice for better performance. Specifications Model Panel Resolution Aspect ratio Brightness Contrast Diagonal screen size Projection Range Zoom Adjustment Focus Adjustment Lens Zoom Ratio Keystone SP-L300 0.63" 3P LCD XGA (1024 x 768) 4:3 Max 3,000 ANSI lumen (Eco - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 13
. Class A is for business while class B emits less electromagnetic waves than class A. The LCD panel used in the LCD projector consists of hundreds of thousands of fine pixels. Like other video display devices, the LCD panel may contain bad pixels which do not operate. When shipping a product, the - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 14
is input, it is converted to 1024x768 by the Scaler chip inside the projector. When the real resolution (1024x768) of the projector and the PC output resolution are the same, the screen quality is optimal 27.000 74.250 74.250 AV Timing (VIDEO/S-VIDEO) NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 15
- Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 16
picture on the screen will not be displayed clearly. When installing the screen in bright surroundings, use curtains. You can install the projector in the following locations: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling. (To view the installation position settings) To view the picture - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 17
adjust it using the V-Keystone function. Screen Size and Projection Distance Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If 102 127 152 178 203 229 254 279 305 330 356 381 406 432 457 483 508 533 559 584 610 635 - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 18
Properties> tab will appear. 2. Click on [Settings] tab and set the by referring to described in the display mode table supported by this projector. You do not have to change setup. 3. Press the [Advanced] button. Another property window will appear. - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 19
as a PC monitor. Projected images may differ from the monitor depending on monitor manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be signal problems. | Basic Settings | Connecting - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 20
connecting to the HDMI terminal of your PC, use an HDMI cable (Not supplied). - For the supported input signals, refer to "PC Timing(D-Sub/HDMI)". Connect the [PC 1/DVI AUDIO IN] terminal of the projector and the Audio out terminal of your PC using an audio cable (Not supplied). - If it is - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 21
to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable. - When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [ - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 22
to the HDMI output terminal of the digital output device, use an HDMI cable. - For the supported input signals, refer to "AV Timing(HDMI)". Connect the [PC 1/DVI AUDIO IN] terminal of the projector to the Audio out terminal of your digital output device using an audio cable (Not supplied). - If - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 23
, check that the AV device and your projector are turned off. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied). - For supported input signals, refer to the "AV Timing(VIDEO/S-VIDEO)". Connect the [AV IN R-AUDIO-L] terminal - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 24
. Prepare an audio cable (Not supplied) suitable for your external speaker. Connect the [AUDIO OUT] terminal of the projector to the external speaker using an audio cable. - When using an external speaker, the internal speaker does not operate but you can adjust the volume - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 25
is finished, the LAMP LED indicator is turned off and the STAND BY LED indicator is turned on and remains blue. Remove the power cord. Close the lens cover. Selecting an input source Press the SOURCE button (on the remote control or at the top of the projector). AV, S-Video and HDMI modes can - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 26
Source List Description You can select a device connected to the projector to display. Edit Name 1) PC 1 2) PC 2 3) AV 4) S-Video 5) HDMI You can edit the names of devices connected to the projector. 1) VCR 2) DVD 3) Cable STB 4) HD STB 5) Satellite STB 6) AV Receiver 7) DVD Receiver 8) Game - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 27
(D-Sub/HDMI)and PAL and SECAM of the [S-Video] and [AV] modes, the color cannot be adjusted according to your preferences using the Mode > User OSD. 10) Reset : Restores the mode settings signal is PC Timing(D-Sub/HDMI), Zoom1/Zoom2 is not supported. 1) Normal 2) Zoom1 3) Zoom2 4) 16:9 Adjust the - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 28
be shown though you can view more of the area. In this case, turn Overscan on. Using this function, you can set the display mode optimized for playing movies. 1) Off 2) On ▶ Film Mode can only be supported for the [AV], [S-Video], 480i, and 576i signals. Eliminates or reduces noise that causes - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 29
use. This mode is the recommended mode for a stable lamp brightness that enables a low-noise, comfortable operating environment even as 1.33:1 or 1.78:1. Crosshatch Screen Size Video Type If the screen quality is abnormal since the projector does not identify the input signal type automatically in - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 30
filter time. Reset Filter Time | Basic Functions | Input | Picture | Setup | Option | * Click the Play( )/Stop( ) button in the table below to view the video stereo speaker embedded in the projector. Filter Check Time 1) Balance 2) 100Hz 3) 300Hz 4) 1kHz 5) 3kHz 6) 10kHz Sets the check period - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 31
2) 100 3) 200 4) 400 5) 800 ▶ If the filter usage time is larger than the filter check period, the filter check message is displayed for a minute whenever the projector is turned on. ▶ Filter check message: "Check the filter, and if necessary, clean or replace it." Auto Power On If the power is - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 32
select a menu. Troubleshooting z Check whether your remote control is at a right angle and at the correct distance. Remove any obstacles between your remote control and the product. z Direct lighting of 3-way light bulbs or other lighting device on the remote sensor of the projector may affect the - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 33
- Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 34
Center or a distributor. Contact your distributor or a Service Center if dust or other substances are inside the projector. Lamp Replacement Cautions on Lamp Replacement The projector lamp is an expendable item. For best operating performance, replace the lamp according to the usage time. You can - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 35
buying a lamp. When replacing the lamp, check the model code of a purchased product first and refer to the appropriate replacement instructions. The model code can be found on the label that is attached to the bottom or rear of the package box or product. Type 1 (Model Code : SPL300WX/**) Remove - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 36
the Reset Filter Time option after replacing or cleaning the filter of the projector Ventilating openings The location of the ventilation openings The ventilation openings are located on the right and left sides and at the bottom of the projector. | Care and Maintenance | Contact SAMSUNG WORLDWIDE - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 37
.com/dk http://www.samsung.com/ie http://www.samsung.com/fi http://www.samsung.com/fr http://www.samsung.de http://www.samsung.com/hu http://www.samsung.com/it http://www.samsung.com/lu http://www.samsung.com/nl http://www.samsung.com/no http://www.samsung.com/pl http://www.samsung.com/pt http://www - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 38
3030 8282 1-800-3000-8282 1800 110011 0800-112-8888 0120-327-527 1800-88-9999 0800 SAMSUNG (0800 726 786) 1-800-10-SAMSUNG(726-7864) 1-800-3-SAMSUNG(726-7864) 1-800-8-SAMSUNG(726-7864) 02-5805777 1800-SAMSUNG(726-7864) 1800-29-3232, 02-689-3232 0800-329-999 1 800 588 889 Middle East & Africa - Samsung SP-L300 | User Manual (user Manual) (ver.1.0) (English) - Page 39