Samsung SR1AM7040WG User Manual
Samsung SR1AM7040WG Manual
 |
View all Samsung SR1AM7040WG manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung SR1AM7040WG manual content summary:
- Samsung SR1AM7040WG | User Manual - Page 1
POWERbot User manual SRIAM70*•• •,SR2AM70+ • •4 Series SI 1 SAMSUNG - Samsung SR1AM7040WG | User Manual - Page 2
the brush and Auto shutter tool / Cleaning the Driving wheel 28 Samsung Smart Home App Preparing the network / Using the Samsung Smart Horne app 32 Notes and cautions Charging / Using / Cleaning and maintenance / About the battery / About the IrDA sensor 34 Information codes 36 Troubleshooting 38 - Samsung SR1AM7040WG | User Manual - Page 3
read this manual thoroughly and WARNING retain it for your reference. • Because these following operating instructions cover various damage exists. This Smart Robot vacuum supports from Samsung Smart Home. More detailed information, please visit Samsung.com/Smarthome. State of California - Samsung SR1AM7040WG | User Manual - Page 4
GENERAL • Use only as described in this manual. • Do not operate POWERbot or the adapter / docking station if it been given supervision or instruction concerning use of the appliance station from the outlet when not in use and before servicing. • Use only the adapter / docking station supplied by - Samsung SR1AM7040WG | User Manual - Page 5
. • Do not mutilate or incinerate batteries as they will explode at high temperatures with the adapter / docking station. POWERbot • Do not pick up hard or sharp without a filter in place. When servicing the unit, never put fingers or . SAVE THESE INSTRUCTIONS POLARIZED PLUG INSTRUCTIONS • To reduce - Samsung SR1AM7040WG | User Manual - Page 6
the user's authority to operate the equipment. • This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1. energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is - Samsung SR1AM7040WG | User Manual - Page 7
2. IC Notice • The term "IC" before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including - Samsung SR1AM7040WG | User Manual - Page 8
contact part of the power plug. - There is a risk of electric shock or malfunction. WARNING Before use ► Do not use POWERbot near electric shock. ► Please check with a Samsung Electronics service center when exchanging batteries. - Using batteries from other products can cause malfunction. - Samsung SR1AM7040WG | User Manual - Page 9
that is running. - Your hair may be caught in the brush, resulting in physical injury. cAutioN Cleaning and maintenance ► Prevent any damage to POWERbot by complying with the following - Do not clean POWERbot by spraying water directly onto it or use benzene. thinner. acetone or alcohol to - Samsung SR1AM7040WG | User Manual - Page 10
station in a place without obstacles and danger of falling. i fs '0'3'tC,) ' Connect the 1 battery charger jack to the docking station 2 Connect the power cord to the battery charger When using the battery charger, the side with the sticker attached must face down. 3 Connect the power plug to - Samsung SR1AM7040WG | User Manual - Page 11
Remote control Batteries (AAA type) (Not included with SR1AM7O1OUW Series ) User manual Spare filter (Option) Docking station Power cord Battery the grain of wooden floors. ► If the emergency switch is off, the POWERbot will not charge even if it is docked on the docking station. ► Always - Samsung SR1AM7040WG | User Manual - Page 12
will recommence the cleaning to complete the cleaning area after two- third of battery charging is done. (Max. 2 times). „---- I • Rated input SR2M470" • • Series" 2 3 Turn on the Manually charge Check the charging 1 emergency switch the POWERbot by status on the bottom placing it on the For - Samsung SR1AM7040WG | User Manual - Page 13
will return to the docking station to charge itself automatically. You can command the POWERbot to recharge at the docking station while it is in cleaning. Low battery (Lo) Manually charge the POWERbot by placing it on the docking station. Steps to take if recharging not occuring: Check the - Samsung SR1AM7040WG | User Manual - Page 14
SR1AM70i*W* / SR2AM70**-W*. series: Automatically returns to the docking station to be charged. Starting Auto clean mode Press and release this button. The POWERbot moves and automatically cleans the set areas only once. DII * Stop cleaning: Press and release the CI) button Using Spot clean mode - Samsung SR1AM7040WG | User Manual - Page 15
Press the [A,B type CI]. Repeat clean [C type Cy on the remote C controller first and then press the [Start/Stop 8]. 111 * Manual clean mode can be Manual clean selected by the direction control buttons of the remote control. * If POWERbot fails to return to the docking station, it will turn - Samsung SR1AM7040WG | User Manual - Page 16
clean Spot clean Manual clean Repeat clean Automatically cleans the Cleans a localized area You can move Cleans repeatedly until set areas only once. intensely. It can be used POWERbot with the the battery is depleted. * SR1AM7010UW series : to clean bread or cookie remote control to clean - Samsung SR1AM7040WG | User Manual - Page 17
markers To prevent the POWERbot from entering the following to save energy during battery charging. Energy-saving mode turns off all functions except battery charging. It reduces the Blinking DI Note ► If you select the Auto/Max/Manual clean mode or press Point cleaning button, the Energy- saving - Samsung SR1AM7040WG | User Manual - Page 18
Using the remote control [A Type] [B Type] Co 3 1, 2 5 7e-°(4e5a6-tun-d_4 2 CDCDCD 4 t SAMSUNG Refer to page 23 Dll Spot CDCDCD I J SAMSUNG 3 1, 2 5 4 Refer to page 23 3 MoD- 1,2 5 6 0 0 SAMSUNG 4 4 Refer to page 24 I_VR7000_ENSU68-00763C-02_USA.Iruld la ENGLISH-18 2C17-02.23 - Samsung SR1AM7040WG | User Manual - Page 19
Turn POWERbot's power on/off Recharging Start/Stop O O O e O CO Select to recharge POWERbot at area intensely Select to clean repeatedly until the battery becomes very low with indicator blinking 3 Suction sequence Remote control 0 0 ID Select to turn Wi-Fi function on or off Remote Remote * - Samsung SR1AM7040WG | User Manual - Page 20
)) Y Select to turn right *Moving backward is not available. 6 Point cleaning Available only with C type remote controllers. You can use the remote control to point and clean the desired spot while the POWERbot is in cleaning process. Point the red light on the floor within 1.6 ft (0.5 m) around - Samsung SR1AM7040WG | User Manual - Page 21
of each part 6 3 7 8 1 ARS 5 Top O 1. Display panel 2. Remote control signal receiver 3. Obstacle sensor 4. Dustbin 5. Camera 6. Dustbin button 7. Bumper sensor 8. Auto shutter tool to Bottom 1. Charge pins 7 2. Brush 3. Brush cover 4 4. Cliff sensor 8 5. Roller 6. Battery cover 7. Brush cover - Samsung SR1AM7040WG | User Manual - Page 22
Battery indicator 6. One-time/Daily schedule 7. Number display 8. Spot clean mode 9. Manual clean mode 10. Repeat clean mode 16 11. Quiet mode 12. Normal mode 13. Turbo mode 15 14. Spot cleaning button 15. Start/Stop button 16. Recharging button *SR1AM70**WA, / SR2AM70**W+ : Wi-Fi supported - Samsung SR1AM7040WG | User Manual - Page 23
Select "AM/PM" (( )1) Skip to previous, next setting Setting the schedule Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station. 0 " .71. ". .f.,.,:,.., )) Start setting Select "One-time" or "Daily" schedule ,..7" .N )) Select "Hour" al Setting - Samsung SR1AM7040WG | User Manual - Page 24
" Setting complete Select "AM/PM" e S Skip to previous, next setting Setting the schedule Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station. E4r.a$44 Start setting Select "One-time" or "Daily" schedule • Setting complete Select "AM/PM" Select - Samsung SR1AM7040WG | User Manual - Page 25
I I [SR1AM7010UW series] For the models which do not include a remote controller, schedule setting is available as below. Setting the schedule cp Press for 3 sec. When the schedule LED is turned on, Daily schedule is set. * - Samsung SR1AM7040WG | User Manual - Page 26
I I Cleaning and maintainin You must turn off the emergency switch before cleaning POWERbot. Cleaning the dustbri OO PUSH 1 Press the button to remove the dustbin 2 Remove the dustbin cover 3 Remove dust in the dustbin and cyclone unit 'Click' a 4 - Samsung SR1AM7040WG | User Manual - Page 27
on the model. 1 1 Remove the brush cover 2 Remove the brush 3 Clean the brush „ i_d_La2A I 2 2 4 Clean the auto shutter tool 5 Reassemble the brush Cleaning the riving whee 6 Reassemble the brush cover (4\ 1 Put a soft cloth on the floor and place POWERbot upside-down on the cloth. `- Use - Samsung SR1AM7040WG | User Manual - Page 28
provider, please ask an agency or service center of Samsung Electronics. El Note ► Please refer to the user manual of the pertinent wireless router without access problems. ► Samsung POWERbots support only Wi-Fi 2.4 Ghz. ► Samsung POWERbots support the communication protocol of the methods of - Samsung SR1AM7040WG | User Manual - Page 29
Samsung Smart Home Service remote control is available.) - Off : Smart control is allowed. ( -±-; CSOO•OO. 0 .6 c_-) - Off : The POWERbot is connecting to the wireless router. CD - II On : The POWERbot is connected to the wireless router. ► If Smart control is locked, you cannot use Samsung - Samsung SR1AM7040WG | User Manual - Page 30
(Easy-Setup) Register the product to the Samsung Smart Flame Service before using the Samsung Smart Home app. Android 1. Press the need to sign in everytime you use Samsung Smart Home app. 4. Select [Robot vacuum] icon. 5. Press the clock button of the remote controller for more than 5 seconds. - - Samsung SR1AM7040WG | User Manual - Page 31
customer center and request for an after-sales service. Controlling POWERbot When accessing the Samsung Smart Robot vacuum app, the control screen will appear. (1) 9 ital0 ae,010 'Malting O Battery Suction power© I. Power on/off 2. Manual clean mode and Direction control (forward movement - Samsung SR1AM7040WG | User Manual - Page 32
. ► To avoid blockages by foreign matter, do not let the POWERbot vacuum up toothpicks, cotton swabs etc. ► If it is difficult to remove foreign matter from the brush, contact an authorized Samsung service center. ► Since the brush removes dirt from the floor during cleaning. foreign matter such as - Samsung SR1AM7040WG | User Manual - Page 33
battery and the model name before purchasing. ► This battery is exclusively for the Samsung Electronics POWERbot. Do not use it for any other product. o• Do not disassemble or modify the battery. ► Do not throw the battery it replaced at a Samsung service center. ► The battery warranty period is 6 - Samsung SR1AM7040WG | User Manual - Page 34
three indicators below blink with an error alarm. 2 Turn off the emergency switch and check the below instructions and take appropriate action 3 Information code will disappear when you turn on the emergency switch C.? R Please check the checklist information. The POWERbot is caught, stuck or - Samsung SR1AM7040WG | User Manual - Page 35
switch and check the below instructions and take appropriate action 3 Information code will disappear when you turn on the emergency switch 0 ill r 11 I I UI r 1 I i ii r-i I 1 1I I r I-II I I II I r rir I LI j r rif- t p in r r i1 1 II I The POWERbot is caught, stuck or trapped - Samsung SR1AM7040WG | User Manual - Page 36
on the docking station to charge it. - When the battery indicator blinks. manually place the POWERbot on the docking station to charge. (Only SR1AM7010UW series) o Replace the batteries (AAA type) if the remote control is not working. The POWERbot has stopped during cleaning. o When "Lo" is - Samsung SR1AM7040WG | User Manual - Page 37
again after a while. The products do not work even though the smart phone is normally connected to the POWERbot. The functions of the Samsung Smart Home App do not work. *Turn off the Samsung Smart Home app and then run it again, or disconnect the smart phone from the wireless router and then - Samsung SR1AM7040WG | User Manual - Page 38
for a period of three years after the last shipment of this product by sending an email to mailto:[email protected]. It is also possible to obtain the complete corresponding source code in a physical medium such as a CDROM: a minimal charge will be required. The following URL http://opensource - Samsung SR1AM7040WG | User Manual - Page 39
mapping plus TM) Button type of POWERbot Touch type Power voltage 100-240 V. 50 Hz/60 Hz Power consumption 130 W Battery specifications 21.6 V / 77.8 Wh Charging type Automatic charging/Manual charging Cleaning mode Auto. Spot. Repeat, Manual, One-time schedule, Daily schedule Charging - Samsung SR1AM7040WG | User Manual - Page 40
customer care center. Country CANADA U.S.A Customer Care Center 1-800-SAMSUNG (726-7864) 1-800-SAMSUNG(726-7864) Web Site www.samsung.com/ca/support (English) www.samsung.comica_fr/support (French) www.samsung.com/usisupport ill I I_VR7000_ENSU68-00763C-02_USA.Indd 40 2017-02-23 4N 12,2711
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
 |
 |
POWERbot
User
manual
SRIAM70*••
•,SR2AM70+
•
•4
Series
SI
1
SAMSUNG