Samsung SRD-850DC User Manual

Samsung SRD-850DC Manual

Get Samsung SRD-850DC PDF manuals and user guides View all Samsung SRD-850DC manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung SRD-850DC manual content summary:

  • Samsung SRD-850DC | User Manual - Page 1
    8 Channel 16 Channel DVR User Manual SRD-830DC/850DC/870DC/ 1610DC/1630DC/1650DC/1670DC
  • Samsung SRD-850DC | User Manual - Page 2
    , POS and Motion Detection) • Various Recording Modes (Time Lapse, Event, Scheduled Recording) • Extended Hard Disk Connection (USB 2.0, eSATA) (SRD-850DC/870DC/1650DC/1670DC) • Alarm Interface (Input: 8/16, Output: 4, Reset: 1) • Remote Monitoring function by Windows Network Viewer 2_ overview
  • Samsung SRD-850DC | User Manual - Page 3
    block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
  • Samsung SRD-850DC | User Manual - Page 4
    BEFORE START This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manual cannot be copied
  • Samsung SRD-850DC | User Manual - Page 5
    , if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of Network Viewer Software / User Manual CD User Manual Remote Control Battery (AAA) SATA Cable (4EA) Audio Extension Cable (optional) (SRD-850DC/870DC/1650DC/
  • Samsung SRD-850DC | User Manual - Page 6
    overview CONTENTS OVERVIEW  2 Features 3 Important Safety Instructions 4 Before Start 8 Part Names and Functions (Front) 10 Mode 31 SPOT Out 32 Zoom 32 Audio ON/OFF 32 Freeze 33 Event Monitoring USING THE DVR  34 System Setup 44 Setting the Device 52 Setting the Recording 55 Setting the Event
  • Samsung SRD-850DC | User Manual - Page 7
    Using Live Viewer 81 Using Search Viewer 85 Viewer Setup 95 About BACKUP VIEWER  96 SEC Backup Viewer APPENDIX  98 Product Specification (SRD-830DC/1610DC/ 1630DC) 101 Product Specification (SRD-850DC/870DC/ 1650DC/1670DC) 104 Product Overview 105 Default Setting 108 Troubleshooting English
  • Samsung SRD-850DC | User Manual - Page 8
    BACKUP REC 1 2 3 4 5 6 7 8 9 0 REC ZOOM FREEZE BACKUP SEARCH TELE WIDE VIEW PRESET MODE AUDIO ALRAM MENU RETURN USB 10 9 8 1610DC/1630DC/1650DC/1670DC DVD RECORDER OPEN/CLOSE 7 6 5 123 4 ALARM HDD NETWORK BACKUP REC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 REC
  • Samsung SRD-850DC | User Manual - Page 9
    a scrolling. In Play mode, - Jog : Pauses the playback and steps backward or forward. - Shuttle : Fast playback forward or backward. Used to open and close the DVR-RW disc tray. Power LED : Displays the power ON/OFF status. Power Button : Used to turn the
  • Samsung SRD-850DC | User Manual - Page 10
    overview PART NAMES AND FUNCTIONS (REAR) 830DC 1 2 3 456 1610DC/1630DC 9 10 11 12 13 14 1 2 3 456 850DC 9 10 11 12 13 14 1 2 3 456 7 1650DC 8 9 10 11 12 13 14 1 2 3 456 7 8 9 10 11 12 13 14 10_ overview
  • Samsung SRD-850DC | User Manual - Page 11
     OVERVIEW 870DC 1 2 3 456 7 1670DC 8 9 10 11 12 13 14 1 2 3 456 7 8 9 10 11 12 13 14 English _11
  • Samsung SRD-850DC | User Manual - Page 12
    -1610DC/1630DC/1650DC/1670DC) : Alarm Input port. - ALARM IN 1~8(SRD-830DC/850DC/870DC) : Alarm Input port. - ALARM RESET IN : Alarm Reset port. - ALARM OUT 1~4 : Alarm Output port. A live screen output port, separate from the VIDEO OUT. SPOT 1 : Supports Single, 4-, 9-, 16-split, and Auto Sequence
  • Samsung SRD-850DC | User Manual - Page 13
    to 6 within 3 seconds. Changing the Remote Control ID 1. Press the ID button of the remote control and check the ID displayed on the DVR screen. The factory default ID of the remote control is 00. 2. Enter 2 digits of your selection in order, while pressing the system [ID] button. 3. When ID input
  • Samsung SRD-850DC | User Manual - Page 14
    CHECKING THE INSTALLATION ENVIRONMENT Samsung Digital Video Recorder ("DVR" hereinafter) is a state-of-art security device, and contains figure 1. Rack Mount Instructions - The following or similar rack-mount instructions are included with the installation instructions : A) Elevated Operating
  • Samsung SRD-850DC | User Manual - Page 15
    improper installation or settings may damage the product.  Number of HDDs supported : Default 1 HDD + Up to 4 HDDs added  Make sure to unplug the power cord from the wall outlet before proceeding with the installation.  By factory default, the unit is equipped with one HDD. J  Cautions for data
  • Samsung SRD-850DC | User Manual - Page 16
    . 3. Install a HDD (x1) on the lower bracket and fix it with screws. Firmly secure the screw so that it does not become loose from vibration. 4. Install HDDs (x3) on , insert the lower and upper brackets into the DVR and fix them with the provided screws. Cover Upper Bracket Lower Bracket
  • Samsung SRD-850DC | User Manual - Page 17
    the HDD. Just make arrangements of the connectors considering the length of each connector. 7. Check if the connectors are properly connected and there is no problem with wiring, and close the Cover cover and fix it with screws. English _17
  • Samsung SRD-850DC | User Manual - Page 18
    M  The following figures are based on Model SRD-1670DC. CONNECTING THE VIDEO, AUDIO, AND MONITOR AUDIO OUT available in "Menu > Setting the Device > Storage Device". (Page 46) 4. This product supports hot-plugging, which connects/removes the USB device during the system operation. J  If you
  • Samsung SRD-850DC | User Manual - Page 19
    recognition and settings are available in "Menu > Device > Storage Device". 3. The DVR supports Hot Plug function to allow connection and disconnection of SATA HDD devices while the system for SRD-830DC/850DC/870DC 2. Alarm In Port for SRD-1610DC/1630DC/1650DC/1670DC 3. Alarm Out Port English _19
  • Samsung SRD-850DC | User Manual - Page 20
    SRD-830DC/850DC/870DC) : Alarm Input Port • ALARM IN 1 ~ 16 (SRD-1610DC/1630DC/1650DC/1670DC) : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset data transfer type. • Baud Rate : Supported Baud rates are 600/1200/ 2400/4800/9600  Ex : DVR(TX+/-) ¥ SCC-C6433,35(RX+/-) DVR(TX+/-) ¥ SCC
  • Samsung SRD-850DC | User Manual - Page 21
    (10/100/1000BaseT) INTERNET Hub/Switcher Back Bone Connecting to the Internet using the router RJ-45 Ethernet Cable (Direct Cable) Hub/Switcher Windows Network Viewer Router xDSL or Cable Modem INTERNET xDSL or Cable Modem External Remote PC DDNS Server (Data Center) English _21
  • Samsung SRD-850DC | User Manual - Page 22
    connecting with other device Connecting to Internet through ADSL INTERNET Hub/Switcher Phone(ADSL) Line RJ-45 Ethernet Cable (Direct Cable) ADSL MODEM Windows Network Viewer 22_ connecting with other device
  • Samsung SRD-850DC | User Manual - Page 23
    GETTING STARTED Starting the system 1. Connect the power cable of the DVR to the wall outlet. 2. Press the Power button on the Down the System You can shut down the system only if you have logged in to the DVR. You require permission to shut down the system if you are not logged in as admin.
  • Samsung SRD-850DC | User Manual - Page 24
    press a menu button on the remote control or the front panel of the DVR when the corresponding menu requires logging in.  By default, initial ID and password are set to "admin", and "4321". Login x ID x Password admin OK Cancel M  For the restricted permission, refer to "Permission Management
  • Samsung SRD-850DC | User Manual - Page 25
    the specific time interval. Displayed if the recording is in process. M To cancel the recording, enter the password. Displayed if there is a problem with the cooling fan. Displayed if the HDD is full and the DVR has an insufficient space to record. Displayed if no HDD is installed or the existing HDD
  • Samsung SRD-850DC | User Manual - Page 26
    In this case, make sure you contact the service center for assistance as this may cause a failure of the cooling fan does not work properly or has a problem, the window will appear and the and PTZ can be deactivated, depending on the user permission. Scene Mode f Audio Off Freeze Stop
  • Samsung SRD-850DC | User Manual - Page 27
    the Backup". (Page 58) Main Menu Accesses the main menu. Refer to the Using the DVR section. (Page 34) Shutdown Turns down the DVR. Show/Hide Launcher Shows or hides the launcher. Refer to "View the Launcher Menu". (Page 28) Login/Logout You can log in or out. Single
  • Samsung SRD-850DC | User Manual - Page 28
    no input is entered for 10 seconds, the menu will disappear.  The Launcher menu can be accessed only by using the mouse.  SRD-830DC/850DC/870DC do not support the 16-split screen mode. PTZ Alarm Freeze Menu Description Date/Time Displays the current time and date. The indication of AM/PM
  • Samsung SRD-850DC | User Manual - Page 29
    in the sequence of the launcher menu items. M  SRD-830DC/850DC/870DC do not support the 16-split screen mode. CH1 CH2 CH3 CH4 CH1 CH4 CH5 CH6 6-split mode CH1 Auto Sequence Switching the split mode SRD-1610DC/1630DC/1650DC/1670DC display 16 Live images in the sequence of Single, 4-split
  • Samsung SRD-850DC | User Manual - Page 30
    live Manual Switching Press the left/right button on the front panel or the remote control, or click the arrow key to move to the next split
  • Samsung SRD-850DC | User Manual - Page 31
    Click Spot Out. The split screen appears according to the Spot Out source. (Page 51)  Spot Out 1 : Supports 16-, 9-, 4-split, Auto Sequence and Single modes.  Spot Out 2, 3, 4 : Supports 4-split, Auto Sequence and Single modes.  The number of Spot Out terminals differs according to the model. For
  • Samsung SRD-850DC | User Manual - Page 32
    live ZOOM This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. 1. Select in the right-click menu. Press the [ZOOM] button on the front panel or the remote control, or simply click < menu. The zoom box appears. >
  • Samsung SRD-850DC | User Manual - Page 33
    within the set time after the first event occurred in CH 1. Event occurrence 4 seconds 9 seconds Stop alarm CH1 CH2 CH1 M  Press the [ALARM] button to reset the alarm settings and to release the event mode.  If an alarm activates in the condition you have set the event record, and pre/post
  • Samsung SRD-850DC | User Manual - Page 34
    (Greenwich Mean Time) is standard World Time and the basis x Language English of world time zone. OK Cancel • Time Sync. : You can set the DVR's current time synchronized to a selected regularly if you select to use . In this case, setup does
  • Samsung SRD-850DC | User Manual - Page 35
     USING THE DVR - Time Server : Enter an IP or URL address of the time server. - Syn2c01h0r-o01n-0iz1ation SetuYpYYY-MM-DD - Activate as Server : Set to to allow the DVR to act as a Time Server for other DVRs. • DST : Set up Daylight Saving Time with its period to make the time earlier than
  • Samsung SRD-850DC | User Manual - Page 36
    >. A dialog for Admin ID and Password input appears. Permission Management Admin Group User x ID x Password x&RQ¿UP3: admin Setup 5. Use direction buttons to move to a desired item, and set the ID and password. M  By default, initial ID and password are set to "admin", and "4321
  • Samsung SRD-850DC | User Manual - Page 37
     USING THE DVR Setting the Group You can create user groups and setup permissions for those user groups. You can register a user for each group in . Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to , and press
  • Samsung SRD-850DC | User Manual - Page 38
    permissions If the admin restricts all permissions of an added group, the users belonging to that group can access only the default minimum menus and can change the user's own password only. 1. Start the DVR. If all permissions are restricted, only the Login dialog should appear. 2. Log in with
  • Samsung SRD-850DC | User Manual - Page 39
    Viewer, refer to the Network Viewer's user guide. (Page 5) 6. When the user setup is done, press . Previous/Next Page OK Cancel Permission Management Admin Group User x Group AdAdll GUrsouepr Group x Name Name x ID x Viewer x Select Group x Password Auto Log out, Manual Input of ID setup
  • Samsung SRD-850DC | User Manual - Page 40
    a user. System Management System Information Settings System Information x Software Version x Broadcast Format x MAC Address V1.00h_100315180929 NTSC 00:00:F0:54:FF:FF S/W Upgrade x Device x Version USB2FlashStorage V1.00h_100315180929 Upgrade • S/W Upgrade : Updates the DVR's software up
  • Samsung SRD-850DC | User Manual - Page 41
    off until it finishes restarting. M  If "Upgrade Failed" appears, retry from the step 4. When you experience continued failure, consult the service center for assistance. System Management System Information Settings System Information x Software Version V1.00h_100315180929 x BroadcastSFo
  • Samsung SRD-850DC | User Manual - Page 42
    and applies to the DVR.  If is checked, the network settings will be imported too. • Load Factory Default : If is selected, a confirmation dialog for "Load Factory Default" prompts. Press to initialize the system to the factory default. 6. To move to the
  • Samsung SRD-850DC | User Manual - Page 43
     USING THE DVR Event Log Event log shows recorded events on alarms, Select . Log Information System Log Event Log Search Day First Page 2010-01-01 Last Page No. User Backup Log ~ 2010-01-02 Search Previous/Next Page Date/Time 5. Use the four direction buttons to move
  • Samsung SRD-850DC | User Manual - Page 44
    Live screen. - If set to , the channel's audio is off on the Live screen and not recorded.  Audio output is available for only 1 channel. M  SRD-830DC/1610DC/1630DC supports 1~4 channels of sound inputs. 44_ using the
  • Samsung SRD-850DC | User Manual - Page 45
    > to initialize settings back to the default 50. 6. When the camera setup is 6> 7> Protocol SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b SAMSUNG-E b Previous DVR. (Page 67)  For the type, CCVC and PELCO-C protocols are supported. 6. When the
  • Samsung SRD-850DC | User Manual - Page 46
    for extension and backup. OK Cancel  SRD-830DC/1610DC/1630DC does not support a port for SATA connection. • Status servicing or additional HDD installation. HDD Map 5. To move to the previous menu, press . OK HDD Map 46_ using the DVR OK
  • Samsung SRD-850DC | User Manual - Page 47
     USING THE DVR Formatting You can format a storage device. Using the mouse may help make setup easier. 3. Use the up/down buttons () in window to move to <
  • Samsung SRD-850DC | User Manual - Page 48
    M  status means that the HDD is operating but it has problems that require technical examination. ( ) appears on the Live screen.  < set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help make setup easier. 3. Use the up/down buttons
  • Samsung SRD-850DC | User Manual - Page 49
    button to display "Add Preset" window, and set its name, start string, and end string. • Port/Ethernet : Sets the port number for the DVR and POS device connection.  COM1 : For RS-232C connections  7001~7016 : For Ethernet connections 5. When the POS Device setup is done, press . POS
  • Samsung SRD-850DC | User Manual - Page 50
    SRD-830DC/1610DC/1630DC does not support the HDMI signal. • Sharpness : You can adjust the sharpness of the video output signal. 6. When the monitor setup is done, press . Screen Setup Some monitors many not display information (camera name, icon, time information, etc.) about the DVR
  • Samsung SRD-850DC | User Manual - Page 51
    set the DVR to between 16-, 9-, 4-split, Auto Sequence, and Single. • Spot Out 2~4 : Only supports 4 channels, with 4-split, Auto Sequence, and Single mode. • Set Mode : A Live screen. 16-, 9-, and 4-split screens are included by default. • Play Screen : Select split modes for the playback screen.
  • Samsung SRD-850DC | User Manual - Page 52
    to all channels? Thu Fri Sat OK Cancel Hol No Recording Continuous Event Both(Cont&Evnt) Apply to All CH OK Cancel 52_ using the DVR
  • Samsung SRD-850DC | User Manual - Page 53
    --.  USING THE DVR Event Record Duration You can set the beginning and ending point  The will be displayed only for SRD-830DC/ 850DC/1610DC/1630DC/1650DC models. REC Quality & Resolution Standard Event Remaining count
  • Samsung SRD-850DC | User Manual - Page 54
     If you set the resolution to , SRD-850DC/1650DC support up to 4 channels while SRD-1630DC support up to 2 channels and SRD-830DC/1610DC support just one channel. REC Quality & Resolution Standard Event Mode x Auto Delete Overwrite Disk End Beep 99 day 54_ using the DVR OK Cancel
  • Samsung SRD-850DC | User Manual - Page 55
     USING THE DVR • Disk End Mode : If selected , recording will continue despite the HDD full while overwriting the oldest. If selected , the recording will stop when
  • Samsung SRD-850DC | User Manual - Page 56
    CH>, selected motion area is applied to all channels. Select Unselect Inverse Menu }When the motion detection setup is done, press . 56_ using the DVR
  • Samsung SRD-850DC | User Manual - Page 57
     USING THE DVR Video Loss Detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup
  • Samsung SRD-850DC | User Manual - Page 58
    saved data can be played back by using external viewers (such as Windows Media Player) on a PC. - DVR : Saved data can be played back only by the DVR. - SEC : Saves data in the Samsung's proprietary format with built-in viewer, which supports immediate playback on a PC. • Filename : You can set
  • Samsung SRD-850DC | User Manual - Page 59
    THE DVR 5. screen from a remote place, and supports mail forwarding function with events. You can button. Logout Exit Connection Mode DDNS Live Transfer Mailing Service Network 4. Select . A window of connection mode 255.255.255. 0 Manual 168.126. 63. 1 OK Cancel English _59
  • Samsung SRD-850DC | User Manual - Page 60
    User ID, Password : In case you selected ADSL, provide the "User ID" and its "Password Manual 168.126. 63. 1 x User ID x Password ID ******** OK Cancel M  DNS server for and can be set by user only if you selected
  • Samsung SRD-850DC | User Manual - Page 61
    the in menu of the connected DVR to .  ADSL and should be the same to the ADSL user information. If you don't know the ID and password, consult your ADSL service provider. Connection Mode Connection Protocol x Connection Mode x Bandwidth
  • Samsung SRD-850DC | User Manual - Page 62
    to the IP router, it prompts with password. While entering nothing to the User Name field, enter "admin" into the password field and press to access set in the in menu of the connected DVR. If more than one DVRs are connected to the router, the TCP port can be different. 3.
  • Samsung SRD-850DC | User Manual - Page 63
    USING THE DVR DDNS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www.google.com) to an IP address consisting of numbers (64.233.189.104). DDNS (Dynamic DNS) is a service that
  • Samsung SRD-850DC | User Manual - Page 64
    Mailing Service SMTP Event x ServerType x Server x Port SMTP mail Server 25 Use Authentication x User x Password ******** x Secure Transfer . Mailing Service SMTP Event Group x Event Interval 10 min Use Event Transfer Sensor Motion Change P/W Power On/Off HDD Info Manual Record •
  • Samsung SRD-850DC | User Manual - Page 65
    the menu item. The recipient is set separately from the DVR user group. Using the mouse may help make setup easier. 3. In the
  • Samsung SRD-850DC | User Manual - Page 66
    VTJOHUIF%73 CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your preference. PTZ Device The PTZ radiation incoming to the iris.  For some cameras, you can use the menu access commands to control the iris. 66_ using the DVR
  • Samsung SRD-850DC | User Manual - Page 67
    DVR • Focus : Enables you to adjust the focus manually that stores the preset list with a new one, you should reset the preset accordingly. 3. Press . The preset will be saved configure the settings of only those cameras that support the protocols of Samsung, Pelco D/P, AD and Panasonic.  If you
  • Samsung SRD-850DC | User Manual - Page 68
    > Record Option". (Page 54) M  Overlapped data : It only appears if there exists overlapped data on a certain time, produced due to the change of DVR's time setup. The latest data comes first, from . It does not appear in . Return Time Search Event Search Backup Search POS
  • Samsung SRD-850DC | User Manual - Page 69
    Motion Motion Motion Play Return Previous/Next Page Backup Search Searches for backup data in the connected backup device. Only data in the format of DVR is included in the search. Refer to in "Backup > Setting the Backup". (Page 58) Using the mouse may help make setup easier. 4. Select
  • Samsung SRD-850DC | User Manual - Page 70
    search for data in the POS device that is connected to the DVR. You can use the mouse to select the related items. 4. the search criteria and press the [ENTER] button.  If you set the motion area to , the button will be activated. • Motion Region : Select an area to perform
  • Samsung SRD-850DC | User Manual - Page 71
    triangle). Click < > again to set the current time to the end time of the backup and the "Backup Range" window appears. - Type : Supports formats of DVR, AVI and SEC. Refer to a list of formats in "Setting the Backup". (Page 58) - Device : Select a backup device. - Check Capacity : Enables you
  • Samsung SRD-850DC | User Manual - Page 72
    , the real time playback may not be supported, depending on the record quality, resolution and number of channels. And some frame rates may be supported. Used for quick forward playback. (x2, the Live channel. The default channel of the Live mode is CH1, which can be changed later. 72_ search &
  • Samsung SRD-850DC | User Manual - Page 73
     WEB VIEWER XFCWJFXFS INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video, PTZ control (if configured), etc. PRODUCT FEATURES • Remote access from a standard browser • Supports PTZ camera controls • Supports 1,
  • Samsung SRD-850DC | User Manual - Page 74
    not allow multiple login of the Admin user.  Initial password of the Admin user is set to "4321".  Password of the Admin and general users can be changed in menu of the DVR.  Normal users should have set under to "Use" before connecting
  • Samsung SRD-850DC | User Manual - Page 75
    for the screen split and full screen mode. Shows the IP address and model name of the connected DVR. Select or for the OSD time information display setting of the Live Viewer. These buttons are used for sequence and changing the screen channel. These buttons are used for capture
  • Samsung SRD-850DC | User Manual - Page 76
    [ALARM] button of the DVR. Motion icon appears when motion is detected. It disappears when pressed the [ALARM] button of the DVR. It displays whether the the DVR, "PTZ" is displayed on the screen. Select a PTZ camera channel and use the [PTZ] button for camera control.  Power PTZ is not supported
  • Samsung SRD-850DC | User Manual - Page 77
    the OSD time information display setting. • DVR Time : Based on the time of the connected DVR • PC Time : Based on the time of the PC currently running the Web Viewer.  WEB VIEWER CHANGING THE LIVE SCREEN MODE  16-split mode does not support "SEQUENCE", "PREVIOUS" and "NEXT". • SEQUENCE : When
  • Samsung SRD-850DC | User Manual - Page 78
    ( )> button and then select the path you want. For Windows Vista or 7, the saving path is "C:\users\ (user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\ Snapshot\" by default, which cannot be modified.  The file is automatically named as following : "IP address_Port number_YYYYMMDD_camera number_index
  • Samsung SRD-850DC | User Manual - Page 79
    it is required at least 1GB of available space.  The default saving path is "C:\Program Files\Samsung\Dvr Web Viewer\VideoClip\Live". To change the saving path, click
  • Samsung SRD-850DC | User Manual - Page 80
    to the pattern. M  While the DVR controls a PTZ camera, Web Viewer cannot control the camera.  Camera menu setup is only available for camera supporting the function.  Each function of PTZ Tilt functions are only available for camera supporting the functions. Ex : Samsung SCC-C6475 80_ web viewer
  • Samsung SRD-850DC | User Manual - Page 81
     WEB VIEWER USING SEARCH VIEWER The Search Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of , , , . These buttons are used for the screen split and full screen mode. Shows the IP address
  • Samsung SRD-850DC | User Manual - Page 82
    DVR This displays the IP address and the status of the connecting DVR. M  Connection failure message No Response : Appears when the DVR does not respond. Access Denied : Appears when the maximum number of users is exceeded.  The number of simultaneous connection is limited to 3. 82_ web viewer
  • Samsung SRD-850DC | User Manual - Page 83
    required at least 1GB of available space.  The default saving path is "C:\Program Files\Samsung\Dvr Web Viewer\VideoClip\Search". To change the saving path, click < Vista or 7, the saving path is "C:\users\(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\VideoClip\" and it cannot be modified.
  • Samsung SRD-850DC | User Manual - Page 84
    date. SEARCHING THE RECORDED VIDEO IN THE TIMELINE It displays the recorded video data status on the DVR after a date is selected. The normal mode displays the time ranging from 0 to 24 Hours while the time line represents 5 minutes. M  The channels are ranging from CH01 to CH16. 84_ web viewer
  • Samsung SRD-850DC | User Manual - Page 85
    : Moves the last time of recorded video in the time line. VIEWER SETUP You can configure the DVR settings remotely on the network. To configure the DVR settings, click . System You can configure the various settings of the DVR system. Date/Time/Language For more information, refer to
  • Samsung SRD-850DC | User Manual - Page 86
    an hour ahead of the standard time of the time zone. • Language Select a preferred language for the DVR. Holiday You can set specific dates to Holidays according to your preferences. For more information, refer to < > menu. (Page 36) • Admin You can change the admin ID or the password. 86_ web viewer
  • Samsung SRD-850DC | User Manual - Page 87
     WEB VIEWER • Group Users are classified into groups and the permission can be set according to the group.  First of all, add a group. • User You can add, change or remove a user or users. • Setup You can set the user permission. System Management For more information, refer to
  • Samsung SRD-850DC | User Manual - Page 88
    camera that is connected to the DVR. M  SRD-830DC/1610DC/1630DC supports 1~4 channels of sound inputs. • PTZ DVR. Set the Port, ID and protocol. Storage Device You can check and change the settings of the storage device. • Device You will see a list of storage devices that are connected to the DVR
  • Samsung SRD-850DC | User Manual - Page 89
    communication port of the POS device that is connected to the DVR. M  You cannot set to use the POS device remotely. Monitor • Monitor You can configure the monitoring screen settings and set the output system. M  SRD-830DC/1610DC/1630DC does not support the HDMI signal. English _89  WEB VIEWER
  • Samsung SRD-850DC | User Manual - Page 90
    XFCWJFXFS • Spot Out The registered user can view the event screen for the duration set in if an event occurs from the appropriate channel. M  The number of will start at that specific time. - Apply to All CH : Click to display the confirmation window. 90_ web viewer
  • Samsung SRD-850DC | User Manual - Page 91
     WEB VIEWER Event Record Duration You can set the start and end times of recording that will be activated if an event occurs. REC Quality & Resolution • Standard/
  • Samsung SRD-850DC | User Manual - Page 92
    output time if a video loss occurs. Alarm Schedule You can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs. 92_ web
  • Samsung SRD-850DC | User Manual - Page 93
     WEB VIEWER Network For more information, refer to . (Page 59) Connection A remote user can access the DVR via the network to check the current mode and the IP address. • Connection You can set the network connection route. • Protocol You can configure
  • Samsung SRD-850DC | User Manual - Page 94
    XFCWJFXFS Mailing Service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. • SMTP You can set the server that sends mails and the event mail for each group. • Recipient You can add a user or users who will receive the mail. 94_ web viewer
  • Samsung SRD-850DC | User Manual - Page 95
     WEB VIEWER ABOUT Click . Displays the model name of connected DVR and the version of Web Viewer. English _95
  • Samsung SRD-850DC | User Manual - Page 96
    If you run the backup file viewer, the backup data file will be automatically played. Recommended System Requirements PCs with a lower specification than the recommended below may not fully support forward/backward and high-speed playback. • OS : Windows XP professional, Windows Vista, Windows 7 • CPU
  • Samsung SRD-850DC | User Manual - Page 97
     BACKUP VIEWER Name / Audio Screen Printout File Tamper Detection / Zoom In/Out Display of storage FPS is between 11 and 19, it is limited to x16, and if the FPS is 6 or less, it supports up to x32. Displays the next frame. This is available only if the playback is stopped. A toggle button.
  • Samsung SRD-850DC | User Manual - Page 98
    /PAL System Input Voltage AC 100~240V Power Consumption Video In Video Video Out Audio In Audio Audio Out Resolution & Frame Rate SRD-830DC/1610DC/1630DC : 55W Composite 16(8) Channel - 1.0Vp-p - 75:Hi Z Termination BNC Type Loop Through Out 16(8) Channel - Auto Termination Composite 2 Channel
  • Samsung SRD-850DC | User Manual - Page 99
    Motion Detection - Video Loss - Pre & Post Recording NTSC : 0.9, 1.9, 3.8, 7.5, 15, 30ips PAL : 0.8, 1.6, 3.1, 6.2, 12.5, 25ips SRD-830DC/1610DC/1630DC : SATA HDDx5(MAX) MAX HDD size : 1TB x 5 = 5TB Internal Search Mode Resolution & Specification Calendar Search Event Search - Alarm, Motion, Video
  • Samsung SRD-850DC | User Manual - Page 100
    Serial Communication Alarm PC Requirements Remote Viewer Operating Systems Features Temperature (Operation SRD-830DC : ~7.42Kg(16.35lb) SRD-1610DC/1630DC : ~7.55Kg(16.64lb) It needs extra H/W to support ATM/POS function. So please contact your vendor to obtain H/W. Note SRD-1610DC SRD-1630DC SRD
  • Samsung SRD-850DC | User Manual - Page 101
    Out Audio In Audio Audio Out Resolution & Frame Rate NTSC/PAL System AC 100~230V (PAL) AC 110~220V (NTSC) SRD-870DC : 56W SRD-1670DC : 60W SRD-850DC/1650DC : 55W Composite 16(8) Channel - 1.0Vp-p - 75: Hi Z Termination BNC Type Loop Through Out 16(8) Channel - Auto Termination Composite 5 Channel
  • Samsung SRD-850DC | User Manual - Page 102
    - Video Loss - Pre & Post Recording NTSC : 0.9, 1.9, 3.8, 7.5, 15, 30ips PAL : 0.8, 1.6, 3.1, 6.2, 12.5, 25ips SRD-850DC/870DC/1650DC/1670DC : SATA HDDx5(MAX) MAX HDD size : 1TB x 5 = 5TB USB HDD - MAX 1 (USB hub not supported) - MAX HDD Size : 500GB SATA HDD - 2 Port - MAX 1HDD/port - MAX HDD Size
  • Samsung SRD-850DC | User Manual - Page 103
    Requirements Remote Viewer Operating SRD-850DC/870DC : ~7.42Kg(16.35lb) SRD-1650DC/1670DC : ~7.55Kg(16.64lb) It needs extra H/W to support ATM/POS function. So please contact your vendor to obtain H/W. Note SRD-1650DC (SRD-850DC) SRD-1650DC (SRD-850DC) SRD-1650DC (SRD-850DC) SRD-1670DC (SRD
  • Samsung SRD-850DC | User Manual - Page 104
    BQQFOEJY PRODUCT OVERVIEW • SRD-1670DC USB 104_ appendix
  • Samsung SRD-850DC | User Manual - Page 105
    /Load Factory Default in MENU  The default settings are based on SRD-1670DC. Password Restricted Access Auto Logout Broadcast Format Video Audio CH Name SEQ-Dwell Time Port ID Protocol Brightness Contrast Color Check Alarm Output Port Duration Replace Alarm Output Port Duration Factory Default
  • Samsung SRD-850DC | User Manual - Page 106
    Resolution Frame Rate Record Quality Resolution Frame Rate Record Quality Setup Disk End Beep Sensor Operation Camera Alarm Duration Mode Sensitivity Alarm Duration Factory Default OFF All 5 sec 800x600 480p Level1(Low) 30 CH1 ~ CH4 CH5 ~ CH8 CH9 ~ CH12 CH13 ~ CH16 OFF ALL ALL Event OFF 1 min CIF
  • Samsung SRD-850DC | User Manual - Page 107
    Detection Connection Mode Connection DDNS Live Transfer Mailing Service Protocol DDNS Site Resolution Quality SMTP Group Webviewer Port Server Port Use Authentication Secure Transfer Group Recipient Permission Event Interval Use Event Transfer Factory Default OFF None 10 sec Static IP 2Mbps
  • Samsung SRD-850DC | User Manual - Page 108
    , input the video source of the camera directly into the DVR. This may find the cause and solve the problem. If I press the [REC] button on the front y This may occur from a problem with the main board, or the related software is corrupt. Contact the nearest service center for more information. The
  • Samsung SRD-850DC | User Manual - Page 109
    for a quick start, refer to the quick start guide (backup, search). y If you use the router for network connection, refer to the "Connecting to the Internet using the router" section in this manual. I forgot the password. y Contact the DVR administrator for help. Backup data is just not played
  • Samsung SRD-850DC | User Manual - Page 110
    an image on the screen. y Recording does not work if the recording settings are not properly configured. 1) Manual Record: Press the [REC] button on the front panel of the DVR or on the remote control to start recording. 2) Scheduled Record: Specify a desired time in Menu - Record Recording Schedule
  • Samsung SRD-850DC | User Manual - Page 111
    it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get
  • Samsung SRD-850DC | User Manual - Page 112
    that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at
  • Samsung SRD-850DC | User Manual - Page 113
    differ in detail to address new problems or concerns. Each version is software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.
  • Samsung SRD-850DC | User Manual - Page 114
    software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems
  • Samsung SRD-850DC | User Manual - Page 115
    for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users. Finally, every program is threatened constantly by software patents. States should not allow
  • Samsung SRD-850DC | User Manual - Page 116
    may charge any price or no price for each copy that you convey, and you may offer support or warranty protection limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a physical medium customarily used for software interchange. b) Convey the
  • Samsung SRD-850DC | User Manual - Page 117
    The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may
  • Samsung SRD-850DC | User Manual - Page 118
    names of licensors or authors of the material; or e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with
  • Samsung SRD-850DC | User Manual - Page 119
    to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If
  • Samsung SRD-850DC | User Manual - Page 120
    terms, reviewing courts software to make sure the software is free for all its users. software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service
  • Samsung SRD-850DC | User Manual - Page 121
    author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library
  • Samsung SRD-850DC | User Manual - Page 122
    modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You
  • Samsung SRD-850DC | User Manual - Page 123
    with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made
  • Samsung SRD-850DC | User Manual - Page 124
    differ in detail to address new problems or concerns. Each version is software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.
  • Samsung SRD-850DC | User Manual - Page 125
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@ cryptsoft.com)" THIS SOFTWARE
  • Samsung SRD-850DC | User Manual - Page 126
    OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The licence and distribution terms for any publically available version or derivative of this code
  • Samsung SRD-850DC | User Manual - Page 127
    how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be
  • Samsung SRD-850DC | User Manual - Page 128
    R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.com www
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
8 Channel
16 Channel DVR
User Manual
SRD-830DC/850DC/870DC/
1610DC/1630DC/1650DC/1670DC