Samsung SRP-350E User Manual
Samsung SRP-350E Manual
 |
View all Samsung SRP-350E manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung SRP-350E manual content summary:
- Samsung SRP-350E | User Manual - Page 1
User's Manual SRP-350 Thermal Printer Rev. 1.07 http://www.bixolon.com - Samsung SRP-350E | User Manual - Page 2
SRP-350 ■ Safety Precautions In using the present appliance, please keep the following safety regulations in order to prevent any hazard or material damage. WARNING Violating following instructions can cause serious injury or death. Do not plug several products in one multi-outlet. • This can - Samsung SRP-350E | User Manual - Page 3
SRP-350 CAUTION Violating following instructions can cause slight wound or damage the appliance. If you observe a strange smoke, odor or noise from the printer, unplug it before taking following measures. • Switch off the printer and unplug the set from the mains. • After the disappearance of the - Samsung SRP-350E | User Manual - Page 4
SRP-350 ■ Warning - not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. order to guard the printer against the static electricity. If the printer is damaged by the static electricity, you should turn the printer "OFF". ■ Waste - Samsung SRP-350E | User Manual - Page 5
by DIP switches. Please be sure to read the instruction in this manual carefully before using your new SRP-350. ※ NOTE - The socket-outlet shall be near the equipment and it shall be easy accessible. ※ All specifications are subjected to change without notice. We at BIXOLON maintain ongoing - Samsung SRP-350E | User Manual - Page 6
the Drawer 11 1-4 Setting the Dip Switches 12 1-4-1 Serial Interface 12 1-4-2 Parallel & USB Interface 13 1-5 Installing or Replacing the Paper Roll 14 1-6 Adjustments and Settings 16 1-7 Using the Printer ...16 1-8 Connecting the computer 17 1-9 Connecting the Power Supply 17 2. Self Test - Samsung SRP-350E | User Manual - Page 7
SRP-350 1. Setting Up the Printer 1-1 Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. SRP-350 Cover Cable CD Roll Paper Manual AC Adapter Power Cord Rev. 1.07 - 7 - - Samsung SRP-350E | User Manual - Page 8
any of the cables, make sure that both the printer and the host are turned off. 1-2-1 Serial Interface (RS-232C) IFA-S TYPE ON Interface connector Drawer kick-out Power supply connector connector ※ When the Dip Switch is "ON" on the Serial Interface Board, DTR and RTS are connected each other - Samsung SRP-350E | User Manual - Page 9
Interface (RS-485) SRP-350 IFA-SF TYPE ON Interface connector Drawer kick-out Power supply connector connector ※ When the Dip Switch is "ON" on the Serial Interface Board, DTR and RTS are connected each other. PRINTER SIDE HOST SIDE Pin No. 1 2 3 4 5 7 8 9 10 11 Shield Signal name FGND - Samsung SRP-350E | User Manual - Page 10
SRP-350 Interface connector Drawer kick-out Power supply connector connector Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19~30 31 32 33 34 35 36 Source Host Host / Printer Host / Printer Host / Printer Host / Printer Host / Printer Host / Printer Host / Printer Host / Printer Printer - Samsung SRP-350E | User Manual - Page 11
SRP-350 Pin No. Shell 1 2 3 4 USB USB connector Drawer kick-out Power supply connector connector Signal Name Shield VBUS DD+ GND Assignment (Color) Drain Wire Red White Green Black Function Frame Ground Host Power on the back of the printer next to the power supply connector. Pin No. 1 - Samsung SRP-350E | User Manual - Page 12
SRP-350 1-4 Setting the Dip Switches 1-4-1 Serial Interface SW Function ON OFF 1 Auto Line Feed Always 6 Parity selection EVEN ODD 7 8 Baud rate selection Refer to the Following Table DIP switch Setting 1 Function Default OFF OFF OFF OFF OFF OFF ON OFF Transmission speed 9600 baud - Samsung SRP-350E | User Manual - Page 13
Parallel & USB Interface SW Function ON OFF Default 1 Auto Line Feed Always enabled Always disabled OFF 2 Reserved - - OFF 3 Reserved - - OFF 4 Reserved - - OFF 5 Reserved - - OFF 6 Reserved - - OFF 7 Reserved - - ON 8 Reserved - - OFF DIP switch Setting - Samsung SRP-350E | User Manual - Page 14
SRP-350 1-5 Installing or Replacing the Paper Roll ※ NOTE - Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1-5-1 Make sure that the printer is not receiving data; - Samsung SRP-350E | User Manual - Page 15
SRP-350 1-5-5 Be sure to note the correct direction that the paper comes off the roll. 1-5-6 Pull out a small amount of paper, as shown. Then close the cover. ※ NOTE - When closing the cover, press the center of printer cover firmly to prevent paper miss-loading. 1-5-7 Tear off the paper as shown. - Samsung SRP-350E | User Manual - Page 16
for users with special requirements. It has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as print density. The SRP-350 also has a near-end sensor for the paper. This can give you a warning when the paper is almost out. If you find that - Samsung SRP-350E | User Manual - Page 17
SRP-350 1-8 Connecting the computer You need an appropriate interface cable. 1-8-1 Plug the cable connector securely into the printer's power cord. Otherwise, you may damage the power supply or the printer. 1-9-1 Make sure that the printer's power switch is turned off, and the power supply's power - Samsung SRP-350E | User Manual - Page 18
the following; 2-1 Make sure paper roll has been installed properly. 2-2 Turn on the power while holding down the FEED button. The self-test begins. 2-3 The self-test prints the current printer status, which provides the control ROM version and the DIP switch setting. 2-4 After printing the current - Samsung SRP-350E | User Manual - Page 19
SRP-350 3. Hexadecimal Dumping This feature allows experienced users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide - Samsung SRP-350E | User Manual - Page 20
SRP-350 4. Specification Printing method Thermal line printing Dot density 180 dpi (7dots/mm) Printing width 72 mm Paper voltage 100~240 VAC Supply voltage Frequency 50/60 90 % RH (Storage) ; Except for paper LIFE * Mechanism Head Auto Cutter 150 Km with recommended paper at normal - Samsung SRP-350E | User Manual - Page 21
SRP-350 5. Appendix 5-1 Cleaning Printer Paper dust inside the printer may lower the print quality. In this case clean the printer as follows. 5-1-1 Open the printer cover and remove the paper if exists. 5-1-2 Clean the print head with a cotton swab moistened with alcohol solvent. 5-1-3 Clean the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
 |
 |
