Samsung SRP-350EG Operation Manual

Samsung SRP-350EG Manual

Get Samsung SRP-350EG PDF manuals and user guides View all Samsung SRP-350EG manuals
Add to My Manuals
Save this manual to your list of manuals

Samsung SRP-350EG manual content summary:

  • Samsung SRP-350EG | Operation Manual - Page 1
    SRP - 350 RECEIPT PRINTER Operator's Manual All specifications are subjected to change without notice
  • Samsung SRP-350EG | Operation Manual - Page 2
    printer are as follows: 1. High speed printing : 35.5(1/6" Feed) lines per second. 2. Low noise thermal printing. 3. RS-232(SRP-350), RS-485(SRP-350S), Parallel(SRP-350P), USB(SRP be sure to read the instruction in this manual carefully before using your new SRP-350/SRP-350P. NOTE : The socket-outlet
  • Samsung SRP-350EG | Operation Manual - Page 3
    1-4. CONNECTING THE DRAWER 6 1-5. CONNECTING THE POWER SUPPLY 7 1-6. INSTALLING OR REPLACING THE PAPER ROLL 8 1-7. ADJUSTMENTS AND SETTINGS 10 1-8. USING THE PRINTER 11 CHAPTER 2. HEXADECIMAL DUMPING 14 CHAPTER 3. THE SELF TEST 15 CHAPTER 4. CODE TABLE 16 CHAPTER 5. CONTROL COMMANDS LIST 24
  • Samsung SRP-350EG | Operation Manual - Page 4
    Chapter 1. Setting Up the Printer 1-1. Unpacking Your printer box should include these items. If any items are damaged or missing, please contact your dealer for assistance. 4
  • Samsung SRP-350EG | Operation Manual - Page 5
    1-2. Connecting the Cables You can connect up the three cables to the printer. They all connect to the connector panel on the back of the printer, which is shown below: Notes : Before connecting any of the cables, make sure that both the printer and the host are turned off. 5
  • Samsung SRP-350EG | Operation Manual - Page 6
    Attach the other end of the cable to the computer. 1-4. Connecting the Drawer WARNING: Use a drawer that matches the printer specification. Using an improper drawer may damage the drawer as well as the printer. CAUTION: Do not connect a telephone line to the drawer kick-out connector; otherwise the
  • Samsung SRP-350EG | Operation Manual - Page 7
    do not match, contact your dealer for assistance. Do not plug in the power cord. Otherwise, you may damage the power supply or the printer. 1. Make sure that the printer's power switch is turned off, and the power supply's power cord is unplugged from the electrical outlet. 2. Check the label on the
  • Samsung SRP-350EG | Operation Manual - Page 8
    rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. 1. Make sure that the printer is not receiving data; otherwise, data may be lost. 2. Open the paper roll cover by pressing the cover-open button
  • Samsung SRP-350EG | Operation Manual - Page 9
    5. Be sure to note the correct direction that the paper comes off the roll. 6. Pull out a small amount of paper, as shown. Then close the cover. Notes : When closing the cover, press the center of printer cover firmly to prevent Paper miss-loading. 7. Tear off the paper as shown. 9
  • Samsung SRP-350EG | Operation Manual - Page 10
    special requirements. It has DIP switches that allow you to change communication settings, such as handshaking and parity check, as well as print density. The SRP-350 also has a near-end sensor for the paper. This can give you a warning when the paper is almost out. If you find that there is
  • Samsung SRP-350EG | Operation Manual - Page 11
    feed paper continuously. Panel lights POWER The POWER light is on whenever the printer is on. ERROR This indicates an error. PAPER OUT This light indicates the end of the paper roll. Install a new paper roll and the printer will continue printing. When the light blinks, it indicates the self-test
  • Samsung SRP-350EG | Operation Manual - Page 12
    Serial Interface(RS-232C, RS-485) Specification DIP Switch Set 1 Functions SW FUNCTION ON OFF 1 Data Receive Error Ignore Print ¡ °?¡ ± 2 Reserved - - 3 HandShaking XON/OFF DTR/DSR 4 Word length 7 bits 8 bits 5 Parity check Yes No 6 Parity selection EVEN ODD 7 Baud rate
  • Samsung SRP-350EG | Operation Manual - Page 13
    Parallel/USB Interface Specification Dip Switch Set 1 Functions SW FUNCTION ON OFF 1 Reserved - - 2 Reserved - - 3 Reserved - - 4 Reserved - - 5 Reserved - - 6 Reserved - - 7 Reserved - - 8 Reserved - - Dip Switch Set 2 Functions SW FUNCTION 1 Emulation 2
  • Samsung SRP-350EG | Operation Manual - Page 14
    users to see exactly what data is coming to the printer. This can be useful in finding software problems. When you turn on the hexadecimal dump function, the printer prints all commands and data in hexadecimal format along with a guide section to help you find specific commands. To use the
  • Samsung SRP-350EG | Operation Manual - Page 15
    Chapter 3. The self test The self-test checks whether the printer has any problems. If the printer does not function properly, contact your dealer. The self-test checks the following; 1. Make sure paper roll has been installed properly. 2. Turn on the power
  • Samsung SRP-350EG | Operation Manual - Page 16
    Chapter 4. Code Table The following pages show the character code tables. To find the character corresponding to a hexadecimal number, count across the top of the table for the left digit and count down the left column of the table for the right digit. For example, 4A = J. Page 0 ( PC437 : USA,
  • Samsung SRP-350EG | Operation Manual - Page 17
    Page 2 ( PC850 : Multilingual ) 17
  • Samsung SRP-350EG | Operation Manual - Page 18
    Page 3 ( PC860 : Portuguese ) 18
  • Samsung SRP-350EG | Operation Manual - Page 19
    Page 4 ( PC 863 : Canadian - French ) 19
  • Samsung SRP-350EG | Operation Manual - Page 20
    Page 5 ( PC 865 : Nordic ) 20
  • Samsung SRP-350EG | Operation Manual - Page 21
    Page 19 ( PC 858 : Euro ) 21
  • Samsung SRP-350EG | Operation Manual - Page 22
    Page 255 ( Space Page ) 22
  • Samsung SRP-350EG | Operation Manual - Page 23
    International Character Set 23
  • Samsung SRP-350EG | Operation Manual - Page 24
    to standard mode in page mode Print and carriage return Cancel print data in page mode Real-time status transmission Real-time request to printer Print data in page mode Set right-side character spacing Select print modes Set absolute print position Select/Cancel user-defined character set Define
  • Samsung SRP-350EG | Operation Manual - Page 25
    bit image Print downloaded bit image Start/end macro definition Turn white/black reverse printing mode on/off Select printing position of HRI characters Transmit printer ID Set left margin Set horizontal and vertical motion units Select cut mode and cut paper Set printing area width Set relative
  • Samsung SRP-350EG | Operation Manual - Page 26
    Control codes k m ....NUL k m n ... r n v 0 m .... w n Hexadecimal codes 1D 6B m... NUL 1D 6B m n ... 1D 72 n 1D 76 30 1D 77 n Function Print bar code Transmit status Print raster bit image Set bar code width 26
  • Samsung SRP-350EG | Operation Manual - Page 27
    APPENDIX A. Star Mode Command Summary Control codes "R" n t n "/" "1" "/" "/" "0" "/" "b" n1 n2 n3 n4 d1 ... dk "M" "p" "P" ":" n "W" n "h" n "-" "1" <
  • Samsung SRP-350EG | Operation Manual - Page 28
    graphics Print fine density graphics Print NV bit image Define download character Delete a download character Enable download character set Disable download character set Definition of download bit image Printing of download bit image Define drive pulse width for peripheral device #1. Control
  • Samsung SRP-350EG | Operation Manual - Page 29
    Partial-cut command to the auto cutter. Cancel last line & initialize printer immediately Deselect printer Set select mode Beep the buzzer Initialize printer Inquiry (Status inquiry) Near end status inquiry Reset printer hardware (Perform test print) Registers a logo pattern Prints a logo pattern
  • Samsung SRP-350EG | Operation Manual - Page 30
    B. Connectors SRP-350/SRP-350S Connector ( Serial Interface ) SRP-350P Connector ( Parallel Interface ) SRP-350U Connector ( USB Interface ) 30
  • Samsung SRP-350EG | Operation Manual - Page 31
    Interface Connector Serial Interface(RS-232) Pin No. 1 2 3 6 7 20 Signal name FG TxD RxD DSR SG DTR Direction Function Output Input Input Output Frame Ground Transmit Data Receive Data Data Set Ready Signal Ground Data Terminal Ready Serial Interface(RS-485) Pin No. Signal Name 1 FGND 2
  • Samsung SRP-350EG | Operation Manual - Page 32
    5 Host / Printer Data 3 6 Host / Printer Data 4 7 Host / Printer Data 5 8 Host / Printer Data 6 9 Host / Printer Data 7 (MSB) 10 Printer nAck 11 Printer Busy 12 Printer Perror 13 14 15 16 17 18 19~30 31 32 33 34 35 36 Printer Host Printer Host Printer Printer Printer Host Select
  • Samsung SRP-350EG | Operation Manual - Page 33
    USB Interface Pin No. Shell 1 2 3 4 Signal Name Assignment Function (Color) Shield Drain Wire Frame Ground VBUS Red Host Power D- White Data Line(D-) D+ Green Data Line(D+) GND Black Signal Ground 33
  • Samsung SRP-350EG | Operation Manual - Page 34
    moistened with alcohol solvent. 3) Clean the platen roller and paper end sensor with cotton swab moistened with water. 4) Insert a paper roll and close the printer cover. The remained amount of paper detected by paper near end sensor varies with the diameter of the paper core. To adjust the remained
  • Samsung SRP-350EG | Operation Manual - Page 35
    D. Specification Printing method Thermal line printing Dot density 180 X 180 dpi (7dots/mm) Printing width 72.192 +0.2mm or -0.2mm Paper width Characters per line (default) 79 ~ 80 mm
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
Operator’s Manual
All specifications are subjected to change without notice
SRP - 350
RECEIPT PRINTER