Samsung TXN2034F User Manual (user Manual) (ver.1.0) (English)
Samsung TXN2034F Manual
View all Samsung TXN2034F manuals
Add to My Manuals
Save this manual to your list of manuals |
Samsung TXN2034F manual content summary:
- Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 1
TXN2734F / TXN2434F / TXN2034F TXN2036F / TXN2730F / TXN2030F TXN2726 COLOR TELEVISION ... Printed in Mexico AA68-02821A (ENG) Owner's Instructions - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 2
Warning! Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 3
receiver may fall, causing injury to people and/or damage to the TV. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the TV receiver. • Follow the manufacturer's instructions when mounting the unit, and use a mounting accessory recommended by the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 4
that are covered by the operating instructions. Adjusting other controls may result in damage and will often require extensive work by a qualified technician to restore the TV receiver to normal. • When replacement parts are required, be sure the service technician uses replacement parts specified - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 5
instructions. 2) Keep these instructions. 3) Heed all warnings. DOUBLE INSULATED - When servicing use only identical replacement parts. 4) Follow all instructions accessories specified by the manufacturer. 12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 6
the TV 2.7 Connecting a DVD Player (Option 2.7 Connecting a Camcorder 2.8 Installing Batteries in the Remote Control 2.9 Chapter 3: Operation 3.1 Turning the TV On in Memory (Automatic Method 3.6 Adding and Erasing Channels (Manual Method 3.7 Changing Channels 3.8 Using the Channel Buttons - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 7
Remote Control 4.1 Setting Up Your Remote Control to Operate Your VCR or DVD 4.1 Setting Up Your Remote Control TV after the V-Chip Blocks a Channel ("Emergency Escape 4.18 Chapter 5: Troubleshooting 5.1 Identifying Problems 5.1 Appendix A.1 Cleaning and Maintaining Your TV A.1 Using Your TV - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 8
-to-use remote control • Easy-to-use on-screen menu system • Automatic timer to turn the TV on and off • Adjustable picture and sound settings that can be stored in the TV's memory • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • Fine - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 9
advanced features, you must use the remote control. TXN2734F / TXN2434F / TXN2034F TXN2036F TXN2730F / TXN2030F TXN2726 Œ MENU Press to see an on-screen menu of your TV's features. ¨ Remote Control Sensor Aim the remote control towards this spot on the TV. ´ VOL - , + Press to increase or - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 10
YOUR NEW TV Side Panel Jacks You can use the Side panel jacks to connect an A/V component that is used only occasionally, such as a camcorder or video game. (For information on connecting equipment, see pages 2.1 - 2.8.) TXN2734F TXN2434F / TXN2730F TXN2034F TXN2030F / TXN2726 TXN2036F Œ AUDIO - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 11
an S-VHS VCR or DVD player. Ø DVD VIDEO INPUT (Option) Connect video from a DVD player. Note: Monitor Output doesn't operate in the DVD mode. ∏ VHF/UHF Connect to an antenna or to a cable TV system. ˇ AUDIO INPUTS Audio signals from VCRs, DVD players and similar devices. ¨ DVD AUDIO INPUTS (INPUT - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 12
YOUR NEW TV Remote Control You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD and cable box. See page 4.1 for details. Œ POWER Turns the TV on and off. ´ Number - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 13
YOUR NEW TV Remote Control ¯ VCR Controls • REW (Rewind) Press to rewind a tape in your VCR. • STOP Press this button to stop a tape during play, record, rewind or fast forward. If the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 14
YOUR NEW TV Remote Control Œ POWER Turns the TV on and off. ´ Number buttons Press to select channels directly on the TV. ˇ +100 Press to select channels over 100. For example, to select screen menus.) Ò MENU Displays the main on-screen menu. TXN2434F / TXN2034F / TXN2030F 1.7 CHAPTER ONE: YOUR NEW - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 15
2 C h a p t e r Tw o INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 300-ohm Flat Twin Leads" below. If your antenna has one lead that looks like this, see "Antennas with 75-ohm Round Leads" on page 2.2. If you have two antennas - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 16
antenna leads to the combiner. 2 Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel. Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the VHF/UHF antenna terminal on back of the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 17
of this cable to the VHF/UHF antenna terminal on the back of the TV. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 18
the cable box's output channel, which is usually channel 3 or 4.) Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3). Skip step 1 if you have not yet connected to an antenna or a cable - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 19
jacks on the VCR and the AUDIO jacks on the TV. 5 Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV. Follow the instructions in "Viewing a VCR or Camcorder Tape" to view your VCR tape. Note: This figure shows the Standard connector-jack panel. The actual - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 20
INSTALLATION Connecting an S-VHS VCR (Option) Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. ( between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV. An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 21
2 jacks on the TV and the AUDIO OUT jacks on the DVD player. 2 Connect a video cable between the DVD-IN (Y, Pb, Pr) jacks on the TV and the DVD-OUT (Y, Pb, Pr) jacks on the DVD player. Note: For an explanation of Component video, see your DVD player's owner's manual. 2.7 CHAPTER TWO: INSTALLATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 22
are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different. 2.8 CHAPTER TWO: INSTALLATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 23
Replace the cover. w Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.) 2.9 CHAPTER TWO: INSTALLATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 24
and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Plug & Play Feature When the TV is initially powered On, five basic customer settings proceed automatically and subsequently: Setting the language, Video signal source, Ant. input check, Auto - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 25
OPERATION 4 Make sure that the antenna is connected to the TV. And then press the VOL+ or VOL- button to activate "Auto Program" VOL+ button. The message "Plug & Play" is displayed. Plug & Play Note: Plug & Play feature doesn't work when the V-chip is on or when in the A/V mode. 3.2 CHAPTER THREE - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 26
after about thirty seconds. You can also use the MENU, CHANNEL, and VOLUME buttons on the control panel of the TV to make selections. Viewing the Display 1 Press the DISPLAY button. on the remote control. The on-screen display shows any or all of the following: Active channel, Audio source and - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 27
the VOL + button. Plug & Play 2 Press VOL + to select the appropriate language: English, Spanish, or French. Plug & Play 3 Press MENU twice to exit. 3.4 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 28
the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can ), STD, HRC or IRC (all cable TV). Labeling : ---- Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 29
of the available channels. 4 After all the available channels are stored, the Auto program menu reappears. Press the MENU button twice to exit. The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Press the MENU button at - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 30
OPERATION Adding and Erasing Channels (Manual Method) 1 Press the MENU button. Press the CH w button twice to select "Channel", then press the VOL+ button. Labeling : ---- VOL+ or VOLbutton to select "Added" or "Erased". Press the MENU button three times to exit. 3.7 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 31
before the single digit. (For channel "4", press "0", then "4".) Using the PRE-CH Button to select the Previous Channel 1 Press the PRE-CH button. The TV will switch to the last channel viewed. w To quickly switch between two channels that are far apart, tune to one channel, then use the number - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 32
"*", or a blank. (Pressing the CH v button results in this sequence: A,B,...Z,*, blank,0,1,...9). Labeling : ---- w Note: You cannot select "Labeling" in the A/V mode. 5 Press the VOL+ button to switch to the next the label and clear the menus from the screen. 3.9 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 33
pressing CH v or CH w repeatedly (or by holding down either of these buttons). The time will appear every time you press DISPLAY. 3.10 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 34
a particular item. Press MENU four times to exit. w Cool 70 After adjusting an item, the gauge will automatically disappear (after about 5 seconds). 3.11 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 35
VOL - or VOL + to select the "Dynamic", "Standard", "Movie" or "Custom" picture setting. Dynamic Digital NR : Off Tilt : 0 • Choose Dynamic for viewing the TV during the day or when there is brightlight in the room. • Standard: Optimal indoor screen condition. • Choose Movie when viewing the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 36
the VOL - or VOL + button to increase or decrease the value of a particular item. Press the MENU button four times to exit. 3.13 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 37
OPERATION Using Automatic Sound Settings Your TV has four automatic sound settings ("Standard", "Music", "Movie" and "Speech") that are preset at the factory. watching a show that is mostly dialogue (i.e., news). • Choose Custom to recall your personalized settings. 3.14 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 38
OPERATION Setting The On/Off Melody You can hear clear melody sound when the TV is powered On or Off. 1 Press the MENU button to display the menu. Press the CH w button to select "Sound or VOL- button to select the "On" or "Off". 3 Press the MENU button twice to exit. 3.15 CHAPTER THREE: TV OPERATION - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 39
select the appropriate mode in order to view the VCR or Camcorder signal on the TV. 1 Press the MENU button to display the menu. Press the CH w button button. Labeling : ---- 2 Press the CH w button twice to select the "TV/AV". Labeling : ---- 3 Press the VOL+ or VOLbutton . You will switch - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 40
/ TXN2726) Your TV comes equipped with a "universal" remote control. In addition to controlling the TV, the universal remote can also operate a VCR, DVD and a cable box (even if your VCR, DVD and cable box are made by manufacturers other than Samsung). Setting Up Your Remote Control to Operate Your - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 41
SPECIAL FEATURES VCR Codes 15,88 24 26,31,32 22,25 11 19 16,18,22,54,55,61 17,62 16,18,22,54,55,61 23 16,21 9,16,17,23,24,55 62,73,76 3,4,5,6,7,8,22,54,85 23,25 9 24 36 17,18,19,22,24,29,32,36,43 50,51,56,58,66,71,74,76,77,79 11,21,27,28,52,57,67 24 9,16,17,41,62 16 18,23,55,69 23 DVD Codes 7 4 0 6 - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 42
Samsung remote control, press SET. w 3 Press the CABLE button on the top right of your remote control. 4 Enter both digits of the cable box code listed below for your brand of cable box. w The remote control has four "modes": "TV ,48,49 26,28,52 15,16 8,35,74 11,20,21 10,41 7 0,11,30,52,71,72 54 - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 43
FEATURES Fine Tuning Channels Use fine tuning to manually adjust a particular channel for optimal reception. VOL+ and VOLbuttons to adjust the fine tuning. w 4 To store the fine tuning setting in the TV's memory, press the CH w button to select "Select". Press the VOL+ or VOLbutton to select " - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 44
"Normal" or "Zoom". Press the MENU button twice to exit. Dynamic Digital NR : Off Tilt : 0 • Normal : Sets the picture to 4:3 normal mode. This is a standard TV screen size. • Zoom : Magnifies the size of the picture on screen. 4.5 CHAPTER FOUR: SPECIAL FEATURES - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 45
SPECIAL FEATURES Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 46
SPECIAL FEATURES Tilt (TXN2734F / TXN2730F) Due to the Earth's magnetic field there may be same minor image tilt depending on the TV's location. When this occurs, follow the steps below. 1 Press the MENU button to display the menu. Press the VOL + button to select the "Picture" menu. - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 47
of time. For example, you may be watching a channel when commercials start. You can set the Surf to "5 minutes", then switch channels. After 5 minutes, the TV will return to the original channel. To use the Surf: 1 While you are watching the channel to which you want to return, press the R.SURF - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 48
. Press the CH w button three times to select "Function" menu, then press the VOL+ button. Plug & Play w Before using the timer, you must set the TV's clock. (See "Setting the Clock" on page 3.10). 2 Press the CH w button to select "Time", then press the VOL+ button. Plug & Play 3 Press the CH - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 49
the "On time," select "Off" during this step. If no function buttons (including remote control buttons or front panel buttons) are operated for three hours after the TV is turned on by "On time", the TV will automatically turn off. Setting the Sleep Timer The sleep timer automatically shuts off the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 50
Separate Audio Program, which is usually a foreign-language translation. You can also change the MTS setting by pressing the "MTS" button on the remote control. (When you change channels, MTS is set to "Stereo" automatically. To listen in 'SAP' or 'Mono,' change the MTS setting.) 4.11 CHAPTER FOUR - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 51
SPECIAL FEATURES Extra sound settings (Turbo Sound, Surround, or Auto Volume ) • Turbo Sound Turbo sound suitably emphasizes both higher and lower bands of sound (and includes other effects). • Surround "Surround" converts a monaural sound signal into two identical left and right channels. Once the - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 52
displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the may be a small delay before captions appear when you change channels. These are not malfunctions of the TV. 4 Press the CH w button to select "Mode". Press the VOL - or VOL + button - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 53
screen will appear. Enter your 4-digit PIN number. Note: The default PIN number for a new TV set is "0-0-0-0." 3 After entering a valid PIN any 4-digits for your PIN and enter them. w ➜ Note: If you forget the PIN, press the remote-control keys in the following sequence, which resets the pin to - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 54
a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. 1 Press the MENU button to display the menu. Press the CH w button three times to select the "Function" menu - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 55
highlighted, and no letters will blink. To exit this screen, press MENU again. To select a different TV-Rating, press the CH v or CH w button and then repeat the process. Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options. See the next step to change any of the following sub-ratings - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 56
be highlighted, and no letters will blink. To exit this screen, press MENU again. To select a different TV-Rating, press the CH v or CH w button and then repeat the process. Note: The V-chip will automatically block certain categories that are "More restrictive". For example, if you block "L" sub - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 57
or"B". Press MENU four times to save the settings and to clear all screens. Note: The V-Chip will automatically block any category that is "more restrictive." For example . Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the channels. In - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 58
Chapter Five TROUBLESHOOTING If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest service center. Identifying Problems Problem Poor picture Poor sound quality. No picture or sound. No color, - Samsung TXN2034F | User Manual (user Manual) (ver.1.0) (English) - Page 59
may not work properly with another system due to differences in the TV channel frequencies. Specifications Model Voltage Frequency of Operation Dimensions (mm/inches) Weight (Kg/ lbs) TXN2734F / TXN2434F / TXN2034F / TXN2036F / TXN2730F TXN2030F / TXN2726 AC 120V 60Hz TXN2734F: 730 x 485 x 575 mm
Owner’s
Instructions
COLOR TELEVISION
...................................................................................................................
.............
TXN2734F / TXN2434F / TXN2034F
TXN2036F / TXN2730F / TXN2030F
TXN2726
Printed in Mexico
AA68-02821A (ENG)