Samsung UN32F5000AF User Manual Ver.1.0 (English)

Channel Menu

❑

Memorizing Channels

If you are not using a cable box or satellite box, when you first set up

your TV using

Plug & Play

, the TV memorized the channels that were

available over the air or through your cable system and added them to

the

Channel List

. The

Antenna

and

Auto program

functions described

below let you re-run the channel memorization function without having to

re-run the

Plug & Play

procedure.

Antenna (Switch to Cable / Switch to Air

t

)

Before your television can memorize the available channels, you must

select your TV's signal source,

Air

(using an antenna) or

Cable

. Select

Menu >

Channel

>

Antenna

>

Air

or

Cable

. After you have selected the

signal source, go on to the Auto Program function.

✎

Selecting the signal source using the

Antenna

function also

determines the signal source the TV is tuned to. For example, if you

receive your TV signal over the air, and you select

Cable

, you will

see only snow. You must select

Air

to see a picture.

Auto Program

The

Auto Program

function memorizes all channels that are available

over the air or through your cable system and adds them to the

Channel

List

.

✎

If your TV is connected to a cable box or satellite box, you do not

need to run

Auto Program

. You will use the tuner in the box, not the

tuner in the TV, to select channels.

To start

Auto Program

, follow these steps:

1.

Push

MENU

m

→

Channel

→

Auto Program

→

ENTER

E

on your

remote. The Antenna Source screen appears.

2.

On the Antenna Source screen, select the source of your TV signal.

Air

If your TV is connected to an antenna choose

Air

, and then press

ENTER

E

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose

Cable

, and then

press

ENTER

E

. Go to Step 3.

Auto

If you choose

Auto

, and then press

ENTER

E

, the TV will

automatically select the correct Antenna source. Go to Step 3.

3.

On the Cable Type screen, use the

◄/►/▲/▼

buttons to select the

type of digital and analog cable systems you have:

STD

,

HRC

, or

IRC

. Most systems are

STD

(Standard). When done, select

Start

,

and then press

ENTER

E

. The TV will start memorizing channels.

✎

Channel memorization can take up to 45 minutes, depending on

your cable system.

✎

Memorized channels are added to the

Added Channels

list. These

are the channels you will see when you use the Channel buttons on

your remote.

Clear Scrambled Channel

This function filters out scrambled channels after

Auto Program

is

completed. This process may take 20~30 minutes.

✎

Press the

ENTER

E

button to stop

Clear Scrambled Channel

.

✎

This function is only available in

Cable

mode.

❑

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels you've

scheduled for viewing. Add or delete Favorite channels, add or delete

channels from the

Added Channels

list, schedule channels or programs

for viewing. Select a channel to watch on the

All Channels

,

Added

Channels

, or

Favorite

screen by pressing the

▲/▼

buttons, and then

pressing the

ENTER

E

button.

✎

If you use a cable box or satellite box, you cannot use the

Channel

List

functions.

Added Channels

6

Air

6-1

♥ TV #6

7-1

♥ TV #7

8

Air

9

Air

9-1

♥ TV #9

10

Air

10-1

♥ TV #10

11-1

♥ TV #11

Air

'

Zoom

'

Select

T

Tools

► Next Program

Channel List Screens icons are listed on the left side. Select an

icon using the

▲/▼

buttons to view each list.

■

All Channels

: Shows all currently available channels including

those you deleted from the

Added Channels

list.

■

Added Channels

: Shows all Added Channels. These are the

channels that appear when you press the

CH

button.

■

*

Favorite

: Shows all favorite channels.

■

Programmed

: Shows all channels and programs currently

scheduled using

Timer Viewing

.

✎

Remote control buttons active on the

Channel List

screen.

x

Green (

Zoom

): Enlarges or shrinks a channel number.

x

Yellow (

Select

): Move the cursor to a channel. Press the Yellow

button to select the channel. A

c

mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

x

T

(

Tools

): Displays the

Channel List

Tools menu. (The Tools

menus may differ depending on the situation.)

x

►

(

Next Program

): Displays next programs.

Display Icons Used in the Channel List Screens

Icons

Meaning

c

A selected channel.

*

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

❑

The Channel List Tools Menu

O

Channel List

→

t

The Channel List Tools menu contains most of the functions you can use

on the

All Channel

,

Added Channels

, and

Favorite

List screens. To

view, select a list screen, select a channel, and then press the

TOOLS

button.

■

Add / Delete

: Delete a channel from or add a channel to the

Added

Channels

list.

To delete channels from the

Added Channels

list, follow these steps:

1.

Select one or more channels in the

Added Channels

list using the

▲/▼

buttons and the Yellow (

Select

) button on your remote.

2.

Press the

TOOLS

button on your remote. The Tools menu appears.

3.

Select

Delete

in the Tools menu, and then press the

ENTER

E

button.

✎

You can adjust and store settings for each external device you have

connected to an input on the TV. Picture Sizes available by Input

Source are listed below:

Input Source

Picture Size

ATV, AV, Component (480i, 480p)

16:9, Zoom1,

Zoom2, 4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9, Wide Fit, 4:3,

Screen Fit

■

Digital Clean View

: If the broadcast signal received by your TV is

weak, you can activate the

Digital Clean View

feature to reduce any

static and ghosting that may appear on the screen.

✎

When the signal is weak, try all the

Digital Clean View

options until

the TV displays the best picture.

■

MPEG Noise Filter

: Reduces MPEG noise to provide improved

picture quality.

■

HDMI Black Level

:

For HDMI signals, select the black level to adjust

the screen depth. Low make blacks look darker.

✎

Available only in

HDMI

mode (RGB signals).

■

Film Mode

: Sets the TV to automatically sense and process film

signals from all sources and adjusts the picture for optimum quality.

✎

Available in ATV, DTV (interlace), AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■

LED Clear Motion

: Removes drag from fast scenes with a lot of

movement to provide a clear picture.

Picture Reset

Resets the picture settings to their factory defaults.

Sound Menu

Mode

t

■

Standard

: Selects the normal sound mode.

■

Music

: Emphasizes music over voices.

■

Movie

: Provides the best sound for movies.

■

Clear Voice

: Emphasizes voices over other sounds.

■

Amplify

: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

Available in Standard sound mode only.

■

Balance L/R

: Adjusts the balance between the right and left speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)

:

Adjusts the loudness of specific bandwidth frequencies.

■

Reset

: Resets the equalizer to its default settings.

DTS TruSurround

Available in

Standard

sound mode only.

DTS TruSurround is a patented DTS technology that solves the problem

of playing 5.1 multichannel content through two speakers. TruSurround

delivers a compelling, virtual surround sound experience through any

two-speaker playback system, including internal television speakers. It is

fully compatible with all multichannel formats.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks simultaneously (for

example, simultaneous translations of a program into foreign languages).

✎

You can only select a language from among the ones being

broadcast.

Multi-Track Sound

Analog channels only.

■

Mono

: Select for channels that are broadcasting in mono or if you are

having difficulty receiving a stereo signal.

■

Stereo

: Select for channels that are broadcasting in stereo.

■

SAP

: Select to listen to the Separate Audio Program, which is usually

a foreign-language translation.

✎

Depending on the program being broadcast, you can listen to

Mono, Stereo

or

SAP

.

Auto Volume

Because each station has its own broadcasting conditions, the

volume may fluctuate each time you change the channel. This feature

automatically adjusts the volume of a channel by lowering the sound

output when the modulation signal is high or by raising the sound output

when the modulation signal is low.

SPDIF Output

for 32" and above models

The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed

digital audio signal when you connect the digital audio jack on the back

of the TV to a digital audio in jack on a receiver or home theater.

■

Audio Format

: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output format may differ depending

on the input source.

✎

By connecting the TV to a receiver or home theater with

Dolby

Digital

and 5.1ch speakers and selecting

Dolby Digital

, you can

maximize your interactive 3D sound experience.

■

Audio Delay

: Lets you correct timing mismatches between the audio

track and the video when you are watching the TV and listening to

digital audio output from the TV through an external device such as

an AV receiver. When you select

Audio Delay

, a slider appears. Use

the left and right arrow buttons to adjust the slider. Press

ENTER

E

when done (0ms ~ 250ms).

Speaker Select

If you are listening to the sound track of a broadcast or movie through an

external receiver, you may hear a sound echo caused by the difference in

decoding speed between the TV’s speakers and the speakers attached

to your audio receiver. If this occurs, set the TV to

External Speaker

.

✎

When you set

Speaker Select

to

External Speaker

, the TV’s

speakers are turned off. You will hear sound through the external

speakers only. When you set

Speaker Select

to

TV Speaker

both

the TV’s speakers and the external speakers are on. You will hear

sound through both.

✎

When

Speaker Select

is set to

External Speaker

, the

VOLUME

and

MUTE

buttons will not operate and the sound settings will be

limited.

✎

If there is no video signal, both the TV’s speakers and the external

speakers will be mute.

Visual Impaired

Digital channels only.

Adds verbal description to the main audio to help the visually impaired.

Sound Reset

Resets all sound settings to the factory

To add channels to the

Added Channels


1.


All Channels

list using the

▲/▼


Select


2.

Press the

TOOLS


3.

Select

Add


ENTER

E

button.

✎

All deleted channels are shown on the

All Channels

list. You add

channels back to the

Added Channels

list on the

All Channels

list.

✎

A gray-colored channel indicates the channel has been deleted from

the

Added Channels

list.

✎

The

Add

menu option only appears for deleted channels.

■

Add to Favorite /Delete from Favorite

t

: Lets you add

channels to and delete channels from your

Favorites

list.

To add channels to the

Favorites


1.


All Channels

list using the

▲/▼


Select


2.

Press the

TOOLS


3.

Select

Add to Favorite


ENTER

E

button.

To delete channels from the

Favorites


1.


Favorite

Channels list using the

▲/▼


Select


2.

Press the

TOOLS


3.

Select

Delete from Favorite


ENTER

E

button.

■

Timer Viewing

: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time first in the

Time

>

Clock

function to use

Time Viewing

.

To schedule a channel, follow these steps:

1.

Select a channel in the

Added Channels

list using the

▲/▼

buttons

and the Yellow (

Select


2.

Press the

TOOLS


3.

Select

Time Viewing


ENTER

E

button. The Time Viewing screen appears.

Antenna

Channel

Repeat

▲

DTV Air

6-1

Once

▼

L

Move

U

Adjust

E

Enter

R

Return

Timer Viewing

Date

Start Time

01-01-2013

12 : 01 am

4.

Use the

◄/►

buttons to move from entry field to entry field and the

▲/▼

buttons to change the entries. Where numbers are displayed,

you can also enter numbers directly using the number keypad on

your remote.

✎

If you select

Everyday

or

Every Week

, the date you select in the

Date field becomes the start date for your scheduled viewing.

For

Everyday

, the TV will turn on every day, at the time you

selected, starting from that date. For

Everyweek

, the TV will turn

on every week, on the same day of the week as the start date

you selected, at the time you selected, from that day on. If you

select

Once

, the TV will turn on once, on the date and time you

selected.

5.

Press the

ENTER

E

button on your remote when done.

✎

Only

Added Channels

can be scheduled.

✎

Scheduled programs and channels are displayed in the

Programmed

List.

✎

When you select a digital channel, press the

►

button to view the

digital program list. If you highlight a program in the list, and then

press the

ENTER

E

(

Schedule

) button, you set

Timer Viewing

for

that program directly.

■

Channel Name Edit

: Analog channels only. Lets you assign a name

of up to five characters to an analog channel. For example, Hist,

Food, Golf, etc. This makes it easier to find and select a channel.

■

Deselect All

: Deselect all the selected displayed channels.

✎

You can only select

Deselect All

when one or more channels are

selected.

■

Select All

: Select all the channels in the displayed channel list.

■

Auto Program

: See

Auto Program

under Memorizing Channels.

Programmed List (on the Channel List Screen)

The

Programmed

list displays the channels and programs you have

scheduled for viewing using the

Time Viewing

function. You can view,

modify, or delete a show you have scheduled using the functions on the

Programmed

List screen Tools menu.

Programmed List Screen Tools Menu

O

Channel List

→

Programmed

→

t

■

Change Info

: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1.

Select the

Programmed

List icon on the left side of the

Channel List

screen, and then press the

ENTER

E

button.

2.

On the

Programmed

List screen, select the show or channel entry

you want to change, and then press the

TOOLS

button. The Tools

Menu appears.

3.

Select

Change Info

, and then press the

ENTER

E

button. The

Time Viewing

screen appears.

4.

Use the

◄/►

buttons to move from entry field to entry field and the

▲/▼

buttons to change the entries. Where numbers are displayed,

you can also enter numbers directly using the number keypad on

your remote.

Press the

ENTER

E

button when done.

■

Cancel Schedules

: Cancel a show or channel you have scheduled.

To cancel a scheduled show or channel, follow these steps:

1.

Select the

Programmed


Channel List


ENTER

E

button.

2.

On the

Programmed


you want to cancel, and then press the

TOOLS

button. The Tools

Menu appears.

3.

Select

Cancel Schedules


ENTER

E

button.

The

Cancel Schedule

screen appears.

4.

Select

OK


ENTER

E

button.

■

Information

: Display the information for a show or channel you have

scheduled. You can also change the schedule Information.

1.

Select the

Programmed


Channel

List


ENTER

E

button.

2.

On the

Programmed


you want information for, and then press the

TOOLS

button. The

Tools Menu appears.

3.

Select Information, and then press the

ENTER

E

button. The

Timer Viewing Info

screen appears.

4.

Select

Change Info

and press the

ENTER

E

button to change

information, or select Close and press the

ENTER

E

button to

close the Information screen.

■

Select All / Deselect All

: You can select or deselect all channels in

the channel list.

❑

Other Channel Menu Functions

Channel Mode

Lets you select the channel list displayed when you press the

<

CH

>

(Channel) button on your remote. For example, if you select

Favorite

Channels

, you will only see Favorite channels when you press the

<

CH

>

button.

Fine Tune

Analog channels only.

If the reception is clear, you do not have to fine tune the channel, as

this is done automatically during the search and store operation. If the

signal is weak or distorted, fine tune the channel manually.

✎

Select the channel, and then select

Fine Tune

.

✎

Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎

To reset fine-tuning, select the channel, select

Fine Tune

, and then

select

Reset

on the

Fine Tune

screen.

Setup Menu

Plug & Play

Lets you re-run the

Plug & Play

initial setup procedure.

Language

Set the menu language.

✎

Choose between

English

,

Español,

and

Français

.

❑

Setting the Time

Time

✎

The time you set will appear when you press the

INFO

button.

■

Clock

: Set the clock so you can use the various timer features of

the TV.

✎

If you disconnect the power cord, you have to set the clock again.

To set the clock, follow these steps:

1.

Select

Setup

>

Time

>

Clock

.

2.

Press

ENTER

E

and select

Auto

or

Manual

, and then press

ENTER

E

again.

If you selected Auto:

The TV will automatically download the correct time from a digital

channel.

y

Select

Time Zone


ENTER

E

button. Use

the

▲/▼

buttons to select your

Time Zone

, and then press

ENTER

E

.

y

Select

DST

(Daylight Savings Time), and then press

ENTER

E

.

Select

On

if you want to turn the

DST

adjustment on and off

manually. Select

Off

to turn off the

DST

adjustment. Select

Auto

if

you want the TV to adjust to

DST

automatically. Press

ENTER

E

when done.

✎

DST

and

Time Zone

function are only available when the

Clock

Mode

is set to

Auto

.

If you selected Manual:

The

Clock Set

screen appears. Use the

▲/▼

buttons to change the

values in each field or use the number buttons to enter the values

directly. Use the

◄/►

buttons to move from field to field. When done

with all the fields, press

ENTER

E

.

✎

Available only when

Clock Mode

is set to

Manual

.

■

Sleep Timer

t

Automatically shuts off the TV after a preset period of time. (30, 60,

90, 120, 150 and 180 minutes).

✎

To cancel the

Sleep Timer

, select

Off

.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you select. You

can set three different on/off timer settings.

✎

You must set the clock first.

■

On Time / Off Time

: Set the hour, minute, am/pm, and Activate/

Inactivate fields for

On Time

and

Off Time

. Use the

◄/►

buttons to

move from field to field. Use the

▲/▼

buttons to change the values

in each field. To activate the timer with the setting you have chosen,

set the Activate/Inactivate field to

Activate

.

■

Volume

: Set the desired loudness.

■

Contents

: To select what will be turned on when the timer setting is

activated. You can set the TV to turn on a specific channel or play

back contents such as photo or audio files. Use the

◄/►

buttons to

move to the Contents field, and then press the

ENTER

E

button.

The Contents screen appears. Use the

◄/►

buttons to move from

field to field. Use the

▲/▼

buttons to change the values in each field.

- TV/USB

: Select

TV

or

USB

. The USB device must be connected

to your TV before you can select USB.

- Antenna

: Displays the current antenna source,

Air

or

Cable

.

- Channel

: If you have selected TV, select the desired channel.

- Music/Photo

: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) files on the

USB device:

✎

The maximum number of files the TV can display, including sub

folders, in one folder of a USB storage device is 2000.

✎

The media may not play smoothly if you use a USB device rated

lower than USB 2.0.

1.

Use the

◄/►

buttons to move to the field under

Music

or the

field under

Photo


ENTER

E

button. The TV

displays a single folder (the Root folder) and the type or name of the

device.

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various Tools

menus. The Main menu gives you access to most or all of the menu

options available on your TV. The Tools menus display a selected number

of frequently used menu options that change depending on the screen

you are viewing. A Tools menu symbol (

T

) in the lower right side of the

screen indicates that a Tools menu is available.

The Main menu has seven primary categories:

y

Picture

y

Sound

y

Channel

y

Setup

y

Input

y

Application

y

Support

To view the Main menu, press the

MENU

button on your remote. To view

a Tools menu, press the

TOOLS

button on your remote.

✎

The menu options that appear in the Main menu depend on the

Source you have selected. For example, if you have selected the

HDMI source, the Channel category will not appear. To see the

Channel category, you must first select TV in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol (

t

)

next to an option name

indicates the option is also available in one of the Tools menus.

Picture Menu

Mode

t

Select your preferred picture mode.

✎

When your TV is connected to a PC, you can only select

Entertain

and

Standard

.

■

Dynamic

: Brightens the screen. Suitable for a bright room.

■

Standard

: Suitable for a normal room brightness.

■

Movie

: Darkens the screen, making it less glary. Suitable for watching

movies in a darkened room.

■

Entertain

: Sharpens the picture. Suitable for games.

✎

Only available when the

TV

is connected to a

PC

.

Samsung MagicAngle

for 19", 22" models

Adjust screen viewing Angle to optimize screen quality according to your

viewing position.

■

Samsung MagicAngle

: When viewing the screen at an angle from

below or above by setting the appropriate mode for each position you

can obtain a similar picture quality as viewing the screen directly from

the front.

Off

: Select when viewing from the front position.

Lean Back Mode

: Select when viewing from a slightly lower position.

Standing Mode

: Select when viewing from the upper position.

■

Mode

: Adjust screen viewing angle.

✎

When

Samsung MagicAngle

is set to

Lean Back Mode

or

Standing Mode

,

Gamma

is not available.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight

: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast

: Increases or decreases the contrast between dark and light

areas of the picture.

■

Brightness

: Adjusts the brightness of the screen. Not as effective as

Backlight.

■

Sharpness

: Sharpens or dulls the edges of objects.

■

Color

: Adjusts the color saturation. The higher the Color setting, the

more intense the color. Low settings remove color and the picture

becomes black, white, and gray.

■

Tint

: Adjusts the amount of green and red in the picture. As you

increase the amount of green, the amount of red decreases and vice

versa.

✎

When the TV is connected to a PC, you can only make changes to

Backlight, Contrast, Brightness,

and

Sharpness.

Advanced Settings

Available in

Standard

and

Movie

mode only.

Compared to previous models, new Samsung TVs offer a more precise

picture with more precise controls.

✎

When your TV is connected to a PC, you can only make changes to

Gamma

and

White Balance

.

■

Dynamic Contrast

: Adjusts the screen contrast.

■

Black Tone

: Selects the black level to adjust the screen depth. Darker

settings make blacks look darker.

■

Flesh Tone

: Adjusts the amount of red in skin tones.

■

Color Space

: Auto automatically matches the range of colors (the

variety and number of colors) available to create pictures with the

color range of the video source. Native provides a color range wider

than the color range of the video source.

■

White Balance

: Adjusts the color temperature of the picture so that

white objects look white (instead of, for example, slightly pink or

slightly yellow) and the overall color of the picture looks natural.

R-Offset / G-Offset / B-Offset

: Adjusts how dark each color (red,

green, blue) is.

R-Gain / G-Gain / B-Gain

: Adjusts how bright each color (red, green,

blue) is.

Reset

: Resets the

White Balance

to it’s default settings.

■

Gamma

: Adjusts the primary color intensity.

■

Motion Lighting

: When on, the TV automatically adjusts the

brightness of the screen in response to the brightness of the room. In

bright light, the screen brightens. In dim light, the screen dims.

✎

Available in

Standard

mode only.

Picture Options

✎

When the TV is connected to a PC, you can only make changes to

the

Color Tone

,

Size

, and

HDMI Black Level

.

■

Color Tone

: Cool makes the picture bluer (cooler). Warm 1 and Warm

2 make the picture redder (warmer).

✎

Warm1

and

Warm2

are deactivated when the picture mode is set

to

Dynamic

.

■

Size

: Set the size and aspect ratio of the picture on the screen. Your

cable box or satellite receiver may have its own set of screen sizes

as well. However, we highly recommend you use the TVs 16:9 mode

most of the time.

16:9

: Sets the picture to the 16:9 wide screen format.

Zoom1

: Provides moderate magnification of the picture. Sides, top,

and bottom are cut off.

Zoom2

: Provides larger magnification of the picture. Sides, top, and

bottom are cut off.

Wide Fit

: Enlarges the aspect ratio of the picture so the picture fits

the entire screen.

4:3

: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎

Do not watch your TV in the 4:3 format for a long time. Traces of

borders displayed on the left, right and center of the screen may

cause image retention (screen burn) which is not covered by the

warranty.

Screen Fit

: Displays the full image without any cut-off when your TV is

inputting HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

HD signals.

✎

HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

2.

Press the

ENTER

E

button. A list of folders on the device appears.

✎

If there are no folders on your device, press the Yellow (

Select

)

button to select the Root folder, and then press the

RETURN

button. The Timer screen re-appears.

3.

Use the

▲/▼

buttons to highlight a folder that contains music or

photos, and then press the Yellow (

Select

) button to select the folder.

4.

Press the

RETURN

button. The Timer screen re-appears.

■

Repeat

: Select

Once

,

Everyday

,

Mon~Fri

,

Mon~Sat

,

Sat~Sun

or

Manual

. If you select

Manual

, you can select the days you want to

activate the timer by using the

◄/►

buttons to highlight the day, and

then pressing the

ENTER

E

button. To unselect a day, highlight it,

and then press the

ENTER

E

button.

When you are finished making all your selections on the Timer screen,

press either the

ENTER

E

or

RETURN

button.

❑

Other Features

Game Mode

When you connect a game console such as a PlayStation™ or Xbox™

to your TV, you can enjoy a more realistic gaming experience by turning

on the

Game Mode

function.

✎

Precautions and limitations for game mode:

x

Before you disconnect the game console and connect another

external device, set

Game Mode

to

Off

in the setup menu.

x

If you display the TV menu in

Game Mode

, the screen shakes

slightly.

x

Game Mode

is not available when the input source is set to

TV

.

x

After connecting the game console, set

Game Mode

to

On

. You

may notice slightly reduced picture quality.

Program Rating Lock

The

Program Rating Lock

feature lets you block programs you've

determined are inappropriate for your children based on the program's

ratings. To access the

Program Rating Lock

feature and make any

changes, you must enter a PIN (personal identification number). To

watch a blocked program, you must also enter the same PIN.

✎

Program Rating Lock

is not available in

HDMI

or

Component

mode.

✎

The default PIN number of a new TV set is “0-0-0-0”. You can set

your own PIN using the

Change PIN

function.

How It Works

When you access the

Program Rating Lock

Menu functions for the

first time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen

closes and the

Program Rating Lock

Menu appears. Every time you

access the

Program Rating Lock

functions, the PIN screen will appear

and you must enter a PIN.

When the

Program Rating Lock

screen appears, select

Program

Rating Lock

, and then press

ENTER

E

. Select

On


ENTER

E

key again. Depending on what type of programs or movies

you want to block, select one of the options on the screen, and then

press the

ENTER

E

button. The options are listed below:

■

TV Parental Guidelines

: You can block TV programs based on their

ratings. This function allows you to control what your children are

watching.

■

MPAA Rating

: You can block movies based on their MPAA ratings.

The Motion Picture Association of America (MPAA) has implemented

a rating system that provides parents or guardians with advanced

information on which films are appropriate for children.

■

Canadian English

: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French

: You can block TV programs based on their French

Canadian ratings.

■

Downloadable U.S. Rating

: You can use parental restriction

information while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way

for each option. Each option displays a grid or table. All the tables have

ratings listed on the left. The TV Parental Guidelines option also has

kinds of content listed across the top:

ALL

: Lock all TV ratings. /

FV

:

Fantasy violence /

V

: Violence /

S

: Sexual situation /

L

: Adult Language /

D

: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display locks.

You can also Allow All or Lock All. When done, press the

RETURN

button on your remote.

■

Change PIN

: The Change PIN screen will appear. Choose any 4

digits for your PIN and enter them in

Enter New PIN

fields. Re-enter

the same 4 digits in

Confirm New PIN

fields. When the Change PIN

screen disappears, press the

OK

button. The TV has memorized your

new PIN.

✎

If you forget the PIN, press the remote-control buttons in the

following sequence, which resets the pin to “0-0-0-0” :

POWER

(off)

→

MUTE

→

8

→

2

→

4

→

POWER

(on)

Caption

(On-Screen Text Dialogue)

■

Caption

: You can switch the caption function on or off. If captions are

not available, they will not be displayed on the screen.

✎

The

Caption

feature does not work in

Component

or

HDMI

mode.

■

Caption Mode

: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4

: (analog channels only) The

Analog Caption function operates in either analog TV channel mode

or when a signal is supplied from an external device to the TV.

(Depending on the broadcasting signal, the Analog Caption function

may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4

: (Digital

channels only) The Digital Captions function works with digital

channels.

✎

Service1~6

may not be available in digital caption mode depending

on the broadcast.

■

Digital Caption Options

: (Digital channels only)

Size

: Options include Default, Small, Standard and Large. The default

is Standard.

Font Style

: Options include Default and Styles 0 to 7. The default is

Style 0.

Foreground Color

: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the color of

the letters. The default is White.

Background Color

: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the captions. The default is Black.

Foreground Opacity

: This adjusts the opacity of text. Options include

Default, Transparent, Translucent, Solid and Flashing.

Background Opacity

: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent, Solid

and Flashing.

Return to Default

: This option sets each Size, Font Style, Foreground

Color, Background Color, Foreground Opacity and Background

Opacity to its default.

✎

Digital Caption Options

are available only when you can select

Default

and

Service1 ~ Service6

in

Caption Mode

.

✎

The Foreground and Background cannot be set to the same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎

The

Melody

does not play:

x

When no sound is output from the TV because the

MUTE

button

has been pressed.

x

When no sound is output from the TV because the volume has

been reduced to minimum with the

VOL –

button.

x

When the TV is turned off by

Sleep Timer

function.

Eco Solution

■

Energy Saving

: Lets you adjust the brightness of the TV to reduce

power consumption. If you select

Picture Off

, the screen is turned off,

but the sound remains on. Press any button except the volume button

to turn on the screen.

■

Eco Sensor

for 5 series

: To enhance your power savings, the

picture settings automatically adapt to the light in the room.

✎

If you adjust the

Backlight

, the

Eco Sensor

will be set to

Off

.

Min. Backlight

: When

Eco Sensor

is

On

, the minimum screen

brightness can be adjusted manually.

✎

If

Eco Sensor

is

On

, the display brightness may change (become

slightly darker in most cases) depending on the surrounding light

intensity.

■

No Signal Power Off

: Sets how quickly the TV switches to standby

mode if no picture is being received.

✎

Disabled when an attached PC is in power saving mode.

■

Auto Power Off

: The TV will automatically turn off when no user

operation is detected for 4 hours.

Auto Protection Time

If a still image remains on the screen for an amount of time you define,

the screen saver is activated to prevent the formation of ghost images

on the screen.

Support Menu

Self Diagnosis

■

Picture Test

: Use to check for picture problems. If the problem

appears in the test picture, select

Yes

and follow the directions on

the screen.

■

Sound Test

: Use the built-in melody to check for sound problems.

If the problem occurs during the test, select

Yes

and follow the

directions on the screen.

■

Signal Strength

: (Digital channels only) An HD channel’s reception

quality is either perfect or the channels are unavailable. Adjust your

antenna to increase signal strength.

■

Reset

: Reset all settings to the factory defaults.

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN. Change the PIN using the

Change PIN

option.

Software Upgrade

Software Upgrade

can be performed by downloading the latest

firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can find information regarding our call

centers and how to download products and software.

Media Play

Enjoy photos, music and/or movie files saved on a

USB Mass Storage Class (MSC) device.

MEDIA.P

❑

Connecting a USB Device

1.

Turn on your TV.

2.

Connect a USB device containing photo, music, and/or movie files to

the

USB

jack on the back of the TV. A pop up window appears.

3.

Press the

MEDIA.P

button on your remote. The

Media Play

menu

appears.

❑

Using the Media Play Menu

To open

Media Play

in the Menu, follow these steps:

1. Application

on the left, and then press the

ENTER

E

button.

2.

Press the

▲

or

▼

button to select

Media Play (USB)

, and then

press the

ENTER

E

button.

3.

Press the

◄

or

►

button to select an icon (

Videos, Music, Photos,

Settings

), and then press the

ENTER

E

button.

✎

Media Play

might not work properly with unlicensed multimedia

files.

✎

Need-to-Know List before using

Media Play (USB)

x

Supported file systems are FAT and NTFS.

x

Certain types of USB Digital camera and audio devices may not

be compatible with this TV.

x

Media Play

only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

x

Before connecting your device to the TV, please back up your files

to protect them from damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

x

A USB device that requires high power (more than 0.5A) may not

be supported.

x

Do not disconnect the USB device while it is loading.

x

The higher the resolution of the image, the longer it takes to

display on the screen.

x

If a file is corrupted or the TV does not support the file type, the

“Not Supported File Format” message appears.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

specifications may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays with aspect ratios of 16:9 (the ratio of

the screen width to screen height) are primarily designed to display wide

screen format full-motion video. The images displayed on them should

primarily be in the wide screen 16:9 ratio format, or expanded to fill the

screen if your model offers this feature and the images are constantly

moving. Displaying stationary graphics and images on screen, such as

the dark sidebars on non- expanded standard format television video

and programming, should be limited to no more than 5% of the total

television viewing per week. Additionally, viewing other stationary images

and text such as stock market crawls, video game displays, station

logos, web sites or computer graphics and patterns, should be limited

as described above for all televisions. Displaying stationary images that

exceed the above guidelines can cause uneven aging of LED Displays

that leave subtle, but permanent burned-in ghost images in the LED

picture. To avoid this, vary the programming and images, and primarily

display full screen moving images, not stationary patterns or dark bars.

On LED models that offer picture sizing features, use these controls to

view different formats as a full screen picture. Be careful in the selection

and duration of television formats you use for viewing. Uneven LED aging

as a result of format selection and use, as well as burned-in images, are

not covered by your Samsung limited warranty.

y

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY

STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions and

limitations contained herein, SAMSUNG will additionally provide Warranty

Repair Service in the United States on SAMSUNG products purchased

in Canada, and in Canada on SAMSUNG products purchased in the

United States, for the warranty period originally specified, and to the

Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement and

the Original Limited Warranty Statement, a dated Bill of Sale as Proof

of Purchase must be presented to the Service Center. Transportation

to and from the Service Center is the responsibility of the purchaser.

Conditions covered are limited only to manufacturing defects in material

or workmanship, and only those encountered in normal use of the

product. Exclusions include, but are not limited to, any originally specified

provisions for in-home or on-site services, minimum or maximum repair

times, exchanges or replacements, accessories, options, upgrades, or

consumables.

For the location of a SAMSUNG Authorized Service Center, please call

toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image

elements (such as TV channel logos, TV shows or movies in panorama

or 4:3 format, stock or news scroll bars, etc.) on the screen. The

constant display of still pictures can cause ghosting or image burn-in

(image retention) on the LED screen, which will affect image quality. To

reduce the risk of this effect, please follow the recommendations below:

y

Avoid displaying the same TV channel for long periods.

y

Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

y

Reduce brightness and contrast values to the minimum required to

achieve the desired picture quality.

Values that exceed the minimum

may speed up the burn-in process.

y

Frequently use all TV features designed to reduce image retention and

screen burn-in. Refer to proper user manual section for details.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please

contact the SAMSUNG customer care center.

Country

CANADA

U.S.A

Address

Samsung Electronics

Canada Inc.,

Customer Service

55 Standish Court

Mississauga

Ontario L5R 4B2 Canada

Samsung Electronics

America, Inc.

85 Challenger Road

Ridgefield Park, NJ 07660

Customer Care

Center



1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca

(English)

www.samsung.com/ca_fr

(French)

www.samsung.com

LED TV

user manual

© 2013 Samsung Electronics Co., Ltd. All rights reserved.

BN68-04801A-01

- 2 -

- 1 -

- 6 -

- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

UF4000_5000_ZA_BN68-04801A-ENG_ENG-US.indd

1

2013-01-22

°° 6:49:15

Samsung UN32F5000AF User Manual Ver.1.0 (English)

Samsung UN32F5000AF Manual

Samsung UN32F5000AF manual content summary: