Samsung WEP200 Quick Start Guide

Guide No.: GH68-11254A

08/2006. Rev. 1.2

1

Set your Bluetooth phone to discover the

headset by following your phone's guide.

Typically, the steps involve going to the

Settings

,

Connection

, or

Bluetooth

menu on your

phone and then selecting the option to discover

Bluetooth devices.

Your phone will find the Samsung WEP200

headset.

2

Select

Samsung WEP200

.

3

When the phone asks if you want to pair with it,

confirm by selecting

Yes

or

OK

.

4

Enter the headset passkey or PIN,

0000

.

Quick Start Guide

Bluetooth Mono Headset

WEP200

Thank you for purchasing the Samsung Bluetooth

Mono Headset WEP200, we hope you will be

delighted with its operation.

Take a moment before you get started to

familiarize yourself with your new headset.

Make sure you have the following items with your

headset:

Make sure you have the following items with your

headset:

Charging case, Travel adapter, Manual,

2 headset hooks

Charging case, Travel adapter, Manual,

2 headset hooks

Charging case, Manual, 2 headset hooks

For Set 2, use your phone charger as a

power source for recharging.

Charging case, Manual, 2 headset hooks

For Set 2, use your phone charger as a

power source for recharging.

Check the accessories

Check the accessories

Charge your headset

Charge your headset

Charge the headset's battery fully before using

the headset for the first time.

1

Put the headset in the supplied charging case

and close the cover.

2

Plug the travel adapter into the case's

charging socket.

3

Plug the travel adapter into the electrical

outlet.

4

Remove the travel adapter from the case.

• For Set 1, use the travel adapter provided.

• Charge the headset until the red light on the

headset turns to blue.

• The headset will be fully charged in

approximately 2 hours.

Before you can use your headset, you must pair it

with your phone.

The indicator light flashes in blue as you press and

hold the Multi-Function button. Continue holding

down the button until the blue light is steadily lit.

Put your headset in

pairing mode

Turn on Bluetooth on your

phone and pair with headset

Your phone and headset are now paired and

ready to make and receive calls. To confirm

they are operating properly, make a call:

1

Place the headset over your ear.

See

Wearing the headset

on the reverse

side of this guide.

2

On your phone, make a call to the number

you want.

3

If your phone and headset are successfully

paired, you will hear ringing on the headset.

After you have successfully paired your phone

and headset, you do not need to repeat these

initial setup steps each time you use the

headset.

Test and use

Using your WEP200

See

Features and Functions Guide

on the reverse side of this guide

for information on using your

WEP200.

1

Ensure that the headset is off (see

Turn

headset

on/off

on the reverse side of this guide).

2

Press and hold the Multi-Function button until

the indicator light turns on in blue

(approximately 8 seconds).

Before using your headset

Multi-Function button

Hook

Volume control

buttons

Indicator light

Microphone

Charging contact

NOTE

:

The headset cannot be used while charging.

NOTE

:

Your headset supports the headset and/or hands-free

profile(s).

Set 1:

Set 2:

Start here

Charge your headset

Put your headset in pairing mode

Turn on Bluetooth on your phone and

pair with headset

Test and use

Get connected in 4 quick steps

Headquarters:

1301 East Lookout Drive Suite 150

Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/

accessories

Customer Care Center:

1-888-987-4357

Samsung WEP200 Quick Start Guide

Samsung WEP200 - WEP 200 - Headset Manual

Samsung WEP200 manual content summary: