Samsung WF210ANW/XAA (English) - Page 15
Installing Your Washer - shipping bolt installation
View all Samsung WF210ANW/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
01 SETTING UP YOUR WASHER INSTALLING YOUR WASHER STEP 1 Selecting a location Before you install the washer, make sure the location: • Has a hard, level surface without carpeting or flooring that may obstruct ventilation. • Has no dust or alien substances. • Is away from direct sunlight. • Has adequate ventilation. • Will not be freezing (below 32 ˚F or 0 ˚C). • Is away from heat sources such as oil or gas. • Has enough space so that the washer doesn't stand on its power cord. STEP 2 Removing the Shipping Bolts Before using your Washer, you must remove the four shipping bolts from the back of the unit. 1. Loosen all the bolts with the supplied wrench. 2. Slide the bolt and spacer up and remove the bolt with the spacer through the hole in the rear wall of your washer. Repeat for each bolt. 3. Fill the holes with the supplied plastic covers. 4. Keep the shipping bolts and spacers for future use. WF210AN-02832A_EN.indd 15 setting up your washer _15 2010-02-09 ø¿»ƒ 1:14:58