Samsung WF210ANW/XAA (English) - Page 17
Setting Up Your Washer - 02
View all Samsung WF210ANW/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
01 SETTING UP YOUR WASHER 4. Turn on the HOT and COLD water supply and check all connections at the water valve and the faucet for leaks. Cold printed Hot printed 5. Plug the power cord into a 3-prong, well grounded 120 volt 60 Hz approved electrical outlet protected by a 15-amp fuse or comparable circuit breaker. Your washer is grounded through the third prong of the power cord when plugged into a three-prong grounded receptacle. 6. Slide your washer into position. 7. Level your washer by turning the leveling legs in or out as necessary by hand or by using the wrench included with your washer. When your washer is level, tighten the locking nuts using the wrench or (-) flathead screwdriver. Your washer must be leveled on all four sides. A carpenter's level should be used on all four corners of your washer. It's the best to recheck after the first dozen washes. Avoid damage to the legs. Do not move the washer unless the lockingnuts are fastened to the bottom of the washer. WF210AN-02832A_EN.indd 17 setting up your washer _17 2010-02-09 ø¿»ƒ 1:15:02