Samsung WF363BTBEUF/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 23
Using Steam Wash Wf363*, Wf365
View all Samsung WF363BTBEUF/A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
02 WASHING A LOAD OF LAUNDRY Spin Only If you press the Power button and then press and hold the Spin button for 2 seconds, the spin time will be displayed on the display panel. Then, press the Spin button repeatedly until the required spin level is selected, and then press the Start/Pause button. Before pressing the Spin Only button to use the Spin Only function, you can select a cycle with the Cycle Selector. If you have selected a cycle, you can only select the spin level corresponding to the selected cycle. Garment+ You can add or take out laundry items even after the wash has started, as long as the "Garment+ " light is turned on. Pressing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your washer. If you are able to unlock the door and wish to continue the wash cycle, close the door, and then press the Start/Pause button. USING STEAM WASH (WF363*, WF365*) If you select steam, the steam acts at the most effective times for the detected amount of laundry, maximizing the effect of the steam, increasing the wash temperature, enhancing the Soak effect, and improving wash performance. 1. Load the washer. 2. Press the Power button. 3. Turn the Cycle Selector and select a steam cycle. 4. Press the Steam button. 5. Add detergent into the dispenser tray for a wash, and add fabric softener up to the marked line. 6. Press the Start/Pause button. : The washer automatically selects the optimal wash conditions by sensing the weight of the laundry Steam may not necessarily be visible during the steam cycles and may not be present during an entire steam wash cycle. WF361_363_365-02832J-03_EN_20120829.indd 23 washing a load of laundry _23 2012-08-31 12:38:19