Samsung WF363BTBEUF/A1 User Manual Ver.1.0 (English, French, Spanish) - Page 27

03 CLEANING AND MAINTAINING CLEANING THE DEBRIS FILTER We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed. 1. Open the filter cover by pressing and then pulling the handle of the filter cover with your finger. Filter cover 2. Holding the drain cap, pull the drain tube that is hooked on the guide hook to the front. Do not pull the drain tube with excessive force. 3. Place a bowl under the washing machine to catch any remaining water. Then, hold the drain tube with one hand, and turn the drain cap counter clockwise with the other hand to separate it from the drain tube. 4. Drain the remaining water completely. Step 1 Drain cap 5. Turn the debris cap counterclockwise, and then pull the debris cap and debris filter assembly out of the Debris filter cap washer. Step 2 6. Wash any dirt or other material from the debris filter. Make sure the drain pump propeller behind the debris filter is not blocked. Debris filter cap 7. When you have finished cleaning the filter, insert the debris cap and filter assembly back into the washer. Turn the debris filter cap clockwise until the indicator on the debris filter cap is in the 12 o'clock position, pointing to the indicator on the washer. 8. Re-attach the emergency drain cap to the drain tube, and then hook the tube to the hook guide. 9. Re-install the filter cover. Debris filter WF361_363_365-02832J-03_EN_20120829.indd Sec7:27 cleaning and maintaining your washer _27 2012-08-31 12:38:20