Samsung WF42H5200AW/A2 Quick Guide Ver.1.0 (English)

useful tips for your drum washing machine

✔

The descriptions and images in this document may differ from your actual

purchased product. For more information, refer to the user manual.

INSTALLING YOUR WASHING MACHINE

•

Installing your washing machine in the location which is slippery

or uneven, will result in vibrations and noise.

•

If there is too much noise or vibration, check whether the four

levelling adjustment legs are evenly and firmly on the floor.

•

If the washing machine is not level, lift the washing machine

slightly and adjust the lowest of the four levelling adjustment legs.

✔

Before using your washing machine, you must remove the

shipping bolts from the back of the unit.

For more information on removing the safety devices, refer to the user manual.

LEVELLING YOUR WASHING MACHINE WITH THE LEVELLING FEET

✔

Refer to the descriptions appropriate to your washing machine.

1.

Level your washer by turning the

adjustable nut in and out, as shown

in the figure.

2.

When your washing machine is

level, tighten the locking nut using

the (-) driver.

1.

Unfasten the locking

nut by turning it to the

left using a spanner.

2.

Level your washing

machine by turning

the adjustable feet in

and out as necessary

by hand.

3.

Fasten the locking

nut by turning it to the

right using a spanner.

CLEANING THE FILTER

Cleaning the water supply filter

✔

If the filter net is not installed, it may cause a water leakage and operating error. Make sure to install it.

1.

Pull and remove the filter net.

2.

Clean the filter.

3.

Insert the filter net and fasten

its connector firmly.

Cleaning the debris filter

✔

When water does not drain well or ‘5E’ blinks on the display, clean the debris filter. The product appearance

may differ from your washing machine. (However, the cleaning descriptions are the same.)

1.

Open the filter

cover using a coin

or a key.

4.

Unscrew the

emergency drain

cap by turning it

counter clockwise.

2.

Unscrew the

emergency drain

cap and pull out the

emergency drain

tube to drain off the

remaining water.

5.

Clean the debris

filter and the inside

of the drain hose.

3.

Hold the cap on

the end of the

emergency drain

tube and allow all

the water to flow

into a bowl.

6.

Replace the

debris filter, the

emergency drain

cap and tube and

then close the filter

cover.

✔

If you open the debris filter when water remains inside the tub, water may flow out.

✔

If the debris filter is assembled incorrectly or not installed, it may cause a water leakage or operating error.

Therefore make sure to assemble it correctly.

MAKE SURE YOU KNOW...

Adding the

laundry

•

Adding laundry

➲

Press the Add laundry(Stop&Add) button and add the laundry when the Add

laundry lamp turns on.

•

If you add the laundry during a spin cycle, it starts again with the initial set time

regardless of the remaining time.

Washing

bedding

•

Wash bedding using only the Bedding course.

➲

You can wash acrylic, mixed spinning and woolen bedding.

➲

When washing general clothes, the washing machine may

not operate in the optimal status.

•

Wash only one bedding item at a time regardless of size.

➲

Insert bedding rolled up into a ball.

The center of gravity is distributed evenly causing less

vibrations and noise.

✔

Do not wash electric blankets or carpets.

✔

When spinning blankets, cotton bedding, and woolen bedding,

too much noise and vibrations may occur and the wash cannot

be completed as spinning is not performed.

Locking nut

Adjustable nut

Spanner

(-) Driver

Nut

Adjustable feet

Spanner

Inside

Debris

filter

Wash

individually.

Make sure that the leveling feet

legs are level with the floor.

DC68-02209B_EN_DE_FR_ES_IT_PT_RU.indd

1

2008-03-19

¿ÀÈÄ 3:03:50

Section	Page
English	1
German	3
French	5
Spanish	7
Italian	9
Portuguese	11

Samsung WF42H5200AW/A2 Quick Guide Ver.1.0 (English)

Samsung WF42H5200AW/A2 Manual

Samsung WF42H5200AW/A2 manual content summary: