Samsung WF501ANW Trouble Shooting Guide (user Manual) (ver.1.0) (English) - Page 10

Board Input Test Mode, WARNING

Get Samsung WF501ANW PDF manuals and user guides View all Samsung WF501ANW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

ALIGNMENT AND ADJUSTMENTS WARNING To avoid risk of electrical shock, personal injury or death; disconnect power to washer before servicing, unless testing requires power. Board Input Test Mode Definition of Board Input Test Mode: - Board Input Test Mode is to displays a specified input after a key press. How to Enter: - To enter the Board Input Test Mode, press the Extra Rinse key during Service Mode. Board Input Test Mode: 1. Activate the Service Mode first. 2. Press the key to start Board Input Test. 3. Turn the Jog-Dial so that the normal course LED is turned on, and The Water Temperature will be displayed in Celsius. 4. Turn the Jog-Dial so that the Heavy duty cycle LED is turned on, The Water Temperature will be displayed in Fahrenheit. 5. Turn the Jog-Dial so that the Perm Press cycle LED is turned on, The door status will be displayed (OP if open, CL if closed). 6. Turn the Jog-Dial so that the Sanitize LED is turned on, The Door Lock Switch status will be displayed (UL if unlocked, LO if locked). 10 (Technical information)WF501ANWX-03011B_EN.indd 10 2011-06-24 �� 6:20:24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
ALIGNMENT AND ADJUSTMENTS
10
Board Input Test Mode
Definition of Board Input Test Mode:
-
Board Input Test Mode is to displays a specified input after a key press.
How to Enter:
-
To enter the Board Input Test Mode, press the Extra Rinse key during Service Mode.
Board Input Test Mode:
1.
Activate the Service Mode first.
2.
Press the key to start Board Input Test.
3.
Turn the Jog-Dial so that the normal course LED is turned on, and The Water Temperature will be
displayed in Celsius.
4.
Turn the Jog-Dial so that the Heavy duty cycle LED is turned on, The Water Temperature will be
displayed in Fahrenheit.
5.
Turn the Jog-Dial so that the Perm Press cycle LED is turned on, The door status will be displayed
(OP if open, CL if closed).
6.
Turn the Jog-Dial so that the Sanitize LED is turned on, The Door Lock Switch status will be
displayed (UL if unlocked, LO if locked).
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
WARNING
(Technical information)WF501ANWX-03011B_EN.indd
10
2011-06-24
�� 6:20:24