Sanyo CE42LM4N-NA Print Specs

42V ROBUST NETWORKABLE LCD MONITOR

Issued 06/08

© 2008 SANYO

CE42LM4N-NA

Robust LCD Monitor

ROBUST LCD MONITOR

SANYO has used all of its expertise in creating a

lightweight aluminum framed LCD monitor which is

protected by non-glare acrylic panel. This means that

the SANYO robust monitor can be used in a wide

variety of environments for dusty and oily circumstance

such as fast food, digital signage, industrial and public

display

EXTENSIVE INPUT & OUTPUT TERMINALS

The 42LM4N has various input and output terminals

including component (Y,Pb,Pr) or RGBHV input and

output with 5-BNC, composite video input and output

with BNC, and RS-232 control port (serial D-Sub 9)

input and output which offer the daisy chain connection.

There are computer inputs (a D-Sub 15 RGB terminal)

and HDMI input with HDCP for High definition signals.

There are also jacks for an external audio amp and

speakers system (RCA).

NON GLARE ACRYLIC PANEL

The 42LM4N has a non glare acrylic panel. This offers

the protection for the panel surface in the public display

applications and easy to clean the panel.

ALUMINUM CABINET & NON HOLES DESIGN

The 42LM4N uses Anodized aluminum and it has quite

unique ‘Non-Holes’ ventilation design which protects

against mischief in the public display applications and

less maintenance when used in a dusty or oily

environment.

OPTIONAL PJ-NET ORGANIZER

An optional network box (POA-LN01) makes it possible

to use the 42LM4WPN as a network monitor, using your

internet browser to monitor and control the display's

properties. Additional software is not required.

Specifications

Type

Liquid Crystal Display Panel

Screen Size

42V (Landscape / Portrait use available)

Portrait is turning clockwise in 90 degree)

Aspect Ratio

16:9

Resolution

WXGA 1366 (H) x 768 (V)

Brightness

500 (cd/m

2

for panel)

Contrast Ratio

800:1 (typical)

Viewing Angle

178° (Vertical/Horizontal)

Panel tilt angle

90 degree tilt available

(panel downward)

Response Time

8ms (gray to gray)

Computer Compatibility

VGA, SVGA, XGA, SXGA, WXGA, UXGA

Audio Amp

N/A

Speaker

N/A

Input Terminals

AV1

Video / Audio (Scart)

AV2

Component (Y,Pb,Pr) / RGBHV (BNC x 5)

Audio (RCA x 2)

AV3

Video (BNC x1)

Computer 1

RGB (D-Sub 15)

HDMI

HDMI v1.1 w/HDCP

RS-232

Serial (D-Sub 9)

Output Terminals

AV2

Component (Y,Pr,Pb) / RGBHV (BNC x 5)

Audio (RCA x 2)

AV3

Video (BNC x1)

Audio Monitor

Audio (RCA x 2)

RS-232

Serial (D-Sub 9)

Power Supply

AC 100-240V

50-60Hz

Power Consumption

225W

Operation Temperature

32 – 115

°F

Operation Altitude

Up to 13, 124ft

(4,000m)

Dimensions (WxHxD)

41.3” x 25.7” x 5.9” (w/o Option)

Net Weight

78 lbs. (w/o Option)

Included Accessories

Owner's Manual; Remote Control w/Batteries;

AC Power Cord

Optional Accessories

PJ-Net Organizer (POA-LN01)

Safety

UL60950

2003

CAN/CSA-C22.2

FCC Rating

Class B, UL Listed

Caution

:

Due to product design considerations,

please consult with a qualified

installation engineer prior to monitor

ceiling mounting. Ceiling mounting

must be such so the ambient

temperature does not exceed 104°F

and that the proper side-supporting

bracket, specifically designed for

ceilings, is used.

Because its products are subject to continuous improvement, SANYO reserves the right to modify

product design and specifications without notice and without incurring any obligations. It is not

recommended to install the screen in direct sunlight without adequate shading. Using in direct

sunlight may cause a black shadow to appear on the screen and will disappear when panel

temperature goes down.

Optional PJ-Net Organizer

(POA-LN01)

Rear Input Panel

Sanyo CE42LM4N-NA Print Specs

Sanyo CE42LM4N-NA - CE - 42" LCD Flat Panel Display Manual

Sanyo CE42LM4N-NA manual content summary: