Home » Sanyo Manuals » Flat Panel Televisions » Sanyo CE52SR1 » Manual Viewer

Sanyo CE52SR1 Instruction Manual

Sanyo CE52SR1 - 52" LCD Flat Panel Display Manual

View all Sanyo CE52SR1 manuals

Add to My Manuals
Save this manual to your list of manuals

Sanyo CE52SR1 manual content summary:

Sanyo CE52SR1 | Instruction Manual - Page 1
Instruction Manual Manuel d'utilisation Manual de instrucciones LCD Monitor Moniteur d'affichage à cristaux liquides Monitor de LCD CE52SR1 GB English F Français E Español Page Page Página 2~15 16~28 29~41 Please read this Instruction book before using your LCD monitor. We wish you many hours
Sanyo CE52SR1 | Instruction Manual - Page 2
if it should fall. Your sales person can recommend an approved wall mounting kit. A special wall mounting kit is available for this model. This LCD monitor should be operated only from the type of power source indicated on the monitor or as indicated in the Operating Instructions. If you are not
Sanyo CE52SR1 | Instruction Manual - Page 3
to the original parts. The use of original spare parts can prevent fire, shock and other hazards. Unplug the LCD monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions: I If the power cord or plug is damaged. I If liquid has been spilt in
Sanyo CE52SR1 | Instruction Manual - Page 4
name Responsible party Address Telephone : CE52SR1 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer The AC Power Cord supplied with this LCD monitor meets the requirement for use in SANYO and its suppliers expressly exclude all warranties, express or implied, including (but not limited to) warranties
Sanyo CE52SR1 | Instruction Manual - Page 5
: To prevent injury, the unit must be securely attached to the wall in accordance with the installation instructions. WARNING! High voltages are used in the operation of this set. Refer service to qualified service personnel. Step : 2 Connections I INPUT selection To switch between AV1, RGB, AV2
Sanyo CE52SR1 | Instruction Manual - Page 6
PC, DVI or Network mode. Wide To select the screen mode Full, Full All, Zoom 16:9, Title in 16 seconds, installation mode will appear. Standby To switch the monitor on and off. Also see page 7. Recall To display in other areas of the world. Your SANYO product is designed and manufactured with high
Sanyo CE52SR1 | Instruction Manual - Page 7
LCD monitor off for short periods of time. In standby mode the monitor is switched off but is still receiving mains power. G To turn the monitor our Service desk. Menu Operation Many of your monitors During menu operation the bottom of the on screen display will show which controls can be used
Sanyo CE52SR1 | Instruction Manual - Page 8
enter to the source automatically. i After On Time has been set, you can go on watching other programs. When the set time is reached, the monitor will automatically switch to the preset program. i On Program can only be selected whenAction (Power On) has been set. i Action (Power Off) can be set
Sanyo CE52SR1 | Instruction Manual - Page 9
or 2 button. If the image is not displayed properly, a manual adjustment is required (Refer to following adjustments). H-Position is used to current LCD Monitor using the 1 or 2 button. Bezel H Adjustment is used to align the image horizontally with respect to the other monitors in the video wall to
Sanyo CE52SR1 | Instruction Manual - Page 10
appear if buttons are pressed when child lock is On. i Standby operates normally when childlock is set "On". I Address Set the address for the LCD monitor (0 - 999). I Baud rate Select Baud rate using the 5 or 6 button. To set transmission speed RS232 or LD-NET communication for 19200 or 9600 Baud
Sanyo CE52SR1 | Instruction Manual - Page 11
black bars top and bottom are present and the height is compressed. I Zoom 16:9 4:3 14:9 16:9 Letterbox Video TITLES ON SCREEN TITLES ON SCREEN TITLES ON SCREEN TITLES ON SCREEN As zoom (14:9), but bottom is compressed even more to allow subtitles to be seen. As zoom (14:9), but bottom is
Sanyo CE52SR1 | Instruction Manual - Page 12
Main/Sub Picture Swap button will switch the location for main and sub picture. i Only the sound on the main picture is heard from the monitor speaker. The sound on the sub-picture cannot be heard. i The details for PIP/POP operation (eg,location for sub picture or input source for
Sanyo CE52SR1 | Instruction Manual - Page 13
mode: TEXT/MIX MODE is cancelled temporarily and AV image is displayed. If the signal is removed or disconnected, the monitor will revert to a blue background with "No signal" message on the screen. If the TXT/TV button is pressed during the CANCEL mode, the CANCEL mode will be cancelled, and full
Sanyo CE52SR1 | Instruction Manual - Page 14
No. to the sales dealer. Contrast Ratio Screen(inches/ cm) (viewing measured diagonally) Display Native Resolution Viewing angles Dimensions (WxHxD) Weight (kg) 1500:1 52"/132cm 1920X1080 H:176°, V:176° 1304 x 800 x 234mm 83 Helpful hints I NO PICTURE NO SOUND G Check if monitor is plugged in
Sanyo CE52SR1 | Instruction Manual - Page 15
in pc mode when receiving a standard VESA signal It will be displayed as XGA when the monitor is receiving a XGA or WXGA signal. Component signal support timing Resolution Horizontal Vertical frequency frequency (KHz) (Hz) Remark Resolution 640_480 640_480 640_480 640_480 640_480 800_600
Sanyo CE52SR1 | Instruction Manual - Page 16
Status read command CR INPUT CR SOURCE CR SYSTEM Item Status of Input selection. Status of Input source mode. Status of system of Input mode. Screen Read Command Table Status read command Item CR SCREEN Status of screen size The same of WIDE mode 42
Sanyo CE52SR1 | Instruction Manual - Page 17
Status read command CR PANELH CR MONH Item Status of accumulated lifetime of panel. The same as CR_LAMPH Command Status of accumulated lifetime of monitor The same as CR_PROJH Command Sound control Read Command Table Status read command CR VOLUME CR MUTE Status of volume value. Status of MUTE
Sanyo CE52SR1 | Instruction Manual - Page 18
Part No. 1KA6P1P0456-- N5VYS (1) Printed in U.K.