Sanyo DP19640 Owners Manual

Sanyo DP19640 - 18.5" Diagonal LCD HDTV 720p Manual

Get Sanyo DP19640 - 18.5inch Diagonal LCD HDTV 720p PDF manuals and user guides
UPC - 086483077388
View all Sanyo DP19640 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo DP19640 manual content summary:

  • Sanyo DP19640 | Owners Manual - Page 1
    ESPAÑOL FRANÇAIS ENGLISH
  • Sanyo DP19640 | Owners Manual - Page 2
    the included accessories, such as the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo Manufacturing Corporation. THE FOREGOING WARRANTY
  • Sanyo DP19640 | Owners Manual - Page 3
    nameplate means the product is Listed by Underwriter's Laboratories Inc. , casualty and electrical hazards. SANYO recommends keeping the TV set at its factory settings or moving Energy Saver settings from "Level 1" to "Level 2" or "Level 3" to further reduce power
  • Sanyo DP19640 | Owners Manual - Page 4
    OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the
  • Sanyo DP19640 | Owners Manual - Page 5
    to keep from touching such power lines or circuits, as contact with them might be fatal. 17) Do not overload wall outlets and extension cords, as this can result location of NEC-NATIONAL ELECTRICAL CODE S2898A POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) antenna discharge unit,
  • Sanyo DP19640 | Owners Manual - Page 6
    equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 23) Sudden high volume sound
  • Sanyo DP19640 | Owners Manual - Page 7
    unit is to be mounted will safely support the size and weight of the unit, using the bracket and fasteners you have selected. • Keep cords and cables connected to this flat panel display out of reach of children. • To hang the television on a wall, remove these screws and then remove a stand. Before
  • Sanyo DP19640 | Owners Manual - Page 8
    instructions. Incorrect installation of the stand may result in the TV falling over. How to remove the stand When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform the step in reverse order. For wall mounting, the base
  • Sanyo DP19640 | Owners Manual - Page 9
    - Operable from the remote control, the LCD TV can be programmed for up to 120 minutes to turn off automatically. • V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is encoded with this information. V-chip will allow you to set a restriction
  • Sanyo DP19640 | Owners Manual - Page 10
    to remove the stand 8 Features 9 Power source 9 Contents 10 Parts and functions 11 Remote control 12 Antenna connections 13 Cable TV connections 14 Connections to other equipment 15 TV operation Starting setup 18 TV operation 18 Quick guide for menu operation 19 Convenience functions 20
  • Sanyo DP19640 | Owners Manual - Page 11
    Front Rear Parts and functions Right side POWER indicator Red: Standby Green: On Remote sensor VOLUME +/- buttons CHANNEL / buttons MENU button INPUT/ENTER button POWER button To display the menu screen. Press MENU button to display the menu screen. CHANNEL / buttons, VOLUME +/- buttons and
  • Sanyo DP19640 | Owners Manual - Page 12
    - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control. 5.CH (CHANNEL) + / - / CURSOR / Buttons - Used to operate the menu functions of the LCD TV, and to change the channels of the LCD TV. 6.MENU Button - Use to display the On-Screen menu function
  • Sanyo DP19640 | Owners Manual - Page 13
    If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Antenna Jack Antenna Jack
  • Sanyo DP19640 | Owners Manual - Page 14
    Cable TV service Antenna Jack For basic Cable TV service not requiring a Converter/ Descrambler box, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV. 75 ohm Coaxial Cable For subscribers to scrambled Cable TV service If you subscribe to a Cable TV service
  • Sanyo DP19640 | Owners Manual - Page 15
    model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. To connect the LCD TV /Audio cord (not supplied) VCR To connect the LCD TV to a VCR with an S-Video cord If you connect a VCR with a S-Video cable to
  • Sanyo DP19640 | Owners Manual - Page 16
    , etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component. Should you require further instruction, please contact the
  • Sanyo DP19640 | Owners Manual - Page 17
    MiniAudio Cable not supplied.) HINT: Volume can be adjusted both from the PC and the TV VOL +/-. 3 Press the INPUT SELECT on your Remote Control to step through signal inputs to select PC. 4 Press the MENU to display the TV's PC Setup Menu. Select Auto Adjustment. NOTE: Power on the TV and any
  • Sanyo DP19640 | Owners Manual - Page 18
    Make sure that the antenna or cable TV system connection is made! 1 To turn on the TV, press POWER (POWER indicator on the front of the unit changes green. It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins. Auto Setup Signal Type Automatic Search
  • Sanyo DP19640 | Owners Manual - Page 19
    . The TV's sound will be silenced and "Mute" will appear on the screen. The sound can be switched back on by pressing this button again or the VOL + or -. SLEEP To set the TV to turn off after a preset amount of time, press SLEEP on the remote control. The clock will count up 10 minutes for each
  • Sanyo DP19640 | Owners Manual - Page 20
    Auto Shut Off*1 On/Off Reset Setup hint You can adjust the picture quality to your preference. Bluish (Cool) / Neutral (Standard) / Reddish (Warm) The Backlight feature adjusts the screen to the TV, select this setting. When you connect the DVI device to the TV with analog audio cords, select this
  • Sanyo DP19640 | Owners Manual - Page 21
    the digital channels available in your area, you may visit www.antennaweb.org to receive a list based on your address or zip code. Should you require further assistance you may call our toll-free customer service line at 1-800-877-5032. • New digital channels may be added to your area periodically
  • Sanyo DP19640 | Owners Manual - Page 22
    screen will return to normal TV-operation automatically. Labeling channels Channel label appear with the channel number display each time you turn on the TV empty space from the list of characters. 5 When you finish inputting the label name, press EXIT to return to the normal screen. 6 Repeat steps
  • Sanyo DP19640 | Owners Manual - Page 23
    you forget the password, contact Customer Service at 1-800-877-5032 for assistance. Your original remote control will be required. • To avoid the desired rating, then press ENTER. 7 Press EXIT to return to the normal screen. V-Chip function is activated now. To use the TV after the TV is protected
  • Sanyo DP19640 | Owners Manual - Page 24
    or ENTER. 5 If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed. 6 Set your preferred content rating limits for the additional rating system. 7 You also need "Update" procedure to update rating information. NOTE: • You can
  • Sanyo DP19640 | Owners Manual - Page 25
    signal. • Picture Size menu also can be displayed by pressing SCREEN SIZE on the remote control. A B C D E F G A B C D E F G Full (for 16:9 source programs) Full will display the picture at the maximum size. Native (for PC mode only) Detects the resolution of the signal of the image and it
  • Sanyo DP19640 | Owners Manual - Page 26
    Cable TV company broadcast. IGNITION Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered If the TV is located far from the TV station, disconnect the TV from the power source before
  • Sanyo DP19640 | Owners Manual - Page 27
    SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker. • Unplug unit for an hour, then plug it back in. • Station or Cable TV experiencing problems, tune to another station. • Check sound adjustments (Volume and Mute). • Check for
  • Sanyo DP19640 | Owners Manual - Page 28
    : VHF/UHF In 75 ohms coaxial Digital audio out: 0.5 Vp-p 75 ohms terminated 25.4 mm × 68.6 mm (1 inch × 2-11/16 inches), 8 ohms × 2 1.5W + 1.5W ACCESSORIES Remote control AC Cord Stand Screws × 2 Designs and specifications are subject to change without notice. 28
  • Sanyo DP19640 | Owners Manual - Page 29
    Memo ...
  • Sanyo DP19640 | Owners Manual - Page 30
    J3AI0331A SH 10/02 K January 2010 Enero 2010
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
FRANÇAIS
ENGLISH
ESPAÑOL