Sanyo DP32648 Owners Manual - Page 5

INSTALLATION POSITIONING THE LCD HDTV Always use a firm-flat surface when positioning your HDTV. Do not position the unit in a confined area. Allow adequate space for proper ventilation. DP26648 (DP32648) GETTING STARTED 1 Install supplied batteries in the Remote. (2 "AAA" eneloop Ni-MH rechargeable batteries) PRECAUTIONS Do not use rechargeables together with dry cells, other types, mixed new and old, or batteries with different charge levels. Do not expose the Remote or batteries to moisture or heat. Match the "+" and "-" signs on the batteries with marks inside the Remote Control. For eneloop battery recharging, please refer to your battery charger's instructions (battery charger not included). Please recycle used up rechargeable batteries. For more information visit : www.eneloopusa.com NOTE: All dimensions are in inches. WALL MOUNTING (OPTIONAL) 2 Antenna Connection for off-air signals ANTENNA ANALOG / DIGITAL ANTENNA IN Use the screws that are threaded into the standmounting inserts on the back of your HDTV to secure it to a wall mounting kit. NOTE:Wall Mounting kit is not supplied. VESA standard interface: 200 x 200 OR CABLE THE TUNER IN THIS HDTV CAN RECEIVE: Wall Mounting Inserts Mounting screws measurements: M6 Diameter, Length-12mm (min.) 16mm (max.) a. Digital and Analog off-air signals from an antenna. OR b. Analog or ClearQAM cable channels from a direct Cable TV connection. NOTES: You must use the on-screen MENU to Search for ClearQAM Cable channels. (See page 12.) For the best picture, connect your Cable box or Satellite receiver to HDMI1, 2, or component jacks (Video2 or 3). This HDTV can receive ANY unscrambled RF signal being broadcast. Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032 5