Sanyo DP42841 Owners Manual - Page 8
Remote Control Operation - no sound
View all Sanyo DP42841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
REMOTE CONTROL OPERATION Selects the video source to view. Holding down the key displays the Input List. Modifies the Energy Saver level (see page 10 for details.) Cycles through the available Caption modes (when available.) Pressing it twice restores your HDTV to its factory settings. All user customized settings will be cleared. Select channels directly. For channels 100 and up, press and hold the first number, then enter the remaining two numbers. Scan through the channels in the memory database. Switch between current channel and last selected channel or input. Displays the Channel Information banner. Displays or hides the on-screen menu. Cycles through the available aspect ratios. The different settings either stretch, zoom, or fill the image on your screen. Bars may appear on top and bottom of your screen (or on left and right sides) depending on the broadcasted signal or program. (See page 15) Turns your HDTV On or Off. Selects the desired Audio mode. Stereo, Mono, or SAP (when available.) Displays the current switch on time (see Clock Timer on page 10 for details.) Displays the "Off" Timer. While Off Timer is on-screen, press the "0" key to Set the amount of time (in 30 minute increments) at which the HDTV will turn off. Increases or decreases the audio level. Allows for the direct selection of digital subchannels. For example: to select channel 39.1 press the 3 and 9 keys, followed by the dash -, and 1 keys. Mute or restore the sound. Modifies the Dynamic Volume feature settings (see page 13 for details.) Displays on-screen Help menu. Move the on-screen cursor in the desired direction. Set or select the highlighted option on the screen. Exits the on-screen menu. 8 Need help? www.sanyoctv.com 1-800-877-5032