Sanyo HT30547 Owners Manual

BACK VIEW OF DTV

1

1

Connect a Stereo Amplifier to the DTV Audio Out

jacks as shown.

Note:

Do not

connect external speakers directly to the

DTV.

CONNECTING A STEREO

AMPLIFIER TO THE DTV

AUDIO OUT (FIXED ANALOG) JACKS

STEREO AMPLIFIER

CONNECTING A VCR OR

DVD TO THE TV

CONNECTING A VIDEO

GAME TO THE DTV

AS

SDTV Owner’s Manual

Model No.

HT30547

FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)

Part No.:

1JC6P1P0256 – –

ENGLISH

FRONT A/V (VIDEO1) JACKS

1

Connect a Game System or other external

equipment as shown.

2

Press

INPUT

to select

Video1

.

GAME

SYSTEM

1

PLEASE CALL US AT

1.800.877.5032

IF YOU NEED

ASSISTANCE WITH YOUR NEW

SANYO 30-INCH SDTV.

WE CAN HELP!

Visit us at www.sanyoctv.com

for more information about this model.

If you experience

problems, please call

1-800-877-5032,

We Can Help!

ANALOG AV INPUT2 JACKS

1

Connect a Composite Cable to the AV INPUT 2

Yellow, White, and Red AV jacks as shown

2

OPTIONAL

Connect DVD to the TV's S-Video jack as

shown.

Note:

S-Video jack connection overrides a Video jack

connection (VIDEO2).

3

Press

INPUT

to select

Video2

to view the VCR

or DVD program.

VCR or DVD

DTV VIDEO2

AV INPUT JACKS

S-VIDEO

JACK

(

Optional)

2

1

1

Connect a Component Cable to the Green, Blue,

and Red video jacks as shown.

2

Connect an Audio Cable to the AV INPUT 2 White

and Red audio jacks.

3

Press

INPUT

to select

Component2

.

Note:

Audio / Video INPUT 2 and Component inputs share

the same audio (R / L) input jacks.

CONNECTING A DVD OR GAME SYSTEM

IMPORTANT NOTE:

These jacks accept only 480i

(standard interlaced) signals.

DTV BACK

GAME

SYSTEM

GREEN, BLUE,

RED JACKS

2

AUDIO L/R

JACKS

OPERATING TIP:

Position your DTV at least 2 feet

from stereo speakers. The magnets in the speakers

may affect the picture quality.

OPERATING TIPS:

■

Press the

INPUT

key after connect-

ing cables to access the AV Inputs.

There is NO need to tune to a blank

channel.

■

You DO NOT need to tune the DTV

to Channel 3 or 4 to view a DVD

program.

■

External device must be set to out-

put 480i signal.

1

1

Install batteries in remote control (2AA, not included)

3

Plug in AC power cord (120V AC, 60 Hz.)

PRECAUTIONS

To ensure safe operation, please observe the following

precautions:

R

eplace both batteries at the same time. Do not use a new

battery with a used battery.

Risk of explosion, if battery is replaced by an incorrect type.

Do not expose the Remote Control Unit to moisture or

heat.

RF ANTENNA

CABLE

OR

VCR, CABLE BOX,

or

SATELLITE BOX

OR

2

Connect Signal to the TV’s Integrated Analog / Digital

75 ohm Antenna Input terminal

Analog / Digital

Antenna In

The Tuner in this DTV can receive:

1.

Digital and /or Analog Off-Air Signals

from an RF antenna.

OR

2.

Analog or ClearQAM cable channels.

Note: You must search for ClearQAM

channels using the “Digital Cable

Search” menu option.

OR

3.

The output from a VCR, Cable or

Satellite box.

Signals from a DVD should be

received through the Component In

jacks.

This DTV can receive ANY unscram-

bled RF signal being broadcast.

REMOTE CONTROL

3

➅

PIX Shape Key—

Use to change the video display

format. Available options depend on signal

received and the broadcast’s aspect ratio.

Note:

Cannot display picture on a full screen.

Check

Aspect Ratio of broadcast. Then press PIX SHAPE

key to change setting.

➆

Reset Key—

Press this key twice to restore factory

settings. The TV will automatically start Channel

Search and clear all customized settings.

Note: Channel scan memory database list of digital

and analog channels will be replaced.

If desired,

personal settings can be made again using the

menu options.

➇

Audio Key—

Press to select the desired audio

mode (if available).

➈

Caption Key—

Captioning is text information trans-

mitted along with the picture and sound so it can

be displayed on the TV screen.

Press

CAPTION

to select mode options: Digital

CC1 ~ Digital CC6, or Analog CC1 ~ CC4, OFF, or

QuikCap. (QuikCap switches captions on and off

with the Mute function.) Digital Captions can be

changed using the menu settings.

➉

Mute Key—

Press once to mute the sound; press

again to restore.

Recall Key—

Press to switch between the last two

channels selected. The RECALL key cannot toggle

between a Digital channel and an Analog channel.

Sleep Key—

Press this key then the “

0

” key to set

the Sleep Off Timer. Time can be set in 30-minute

increments up to 3 hours.

Note: The Sleep Timer cancels when the TV is turned

off or if a power failure occurs.

1– – Key—

For Analog Cable channels above 100,

press this key, then press the other two numbers.

Info Key—

Press to display the Digital and Analog

Full Banner information. The banner contains the

following: program title, station ID, program rating,

signal strength, channel number, tuner ID, and

audio information.

11

12

REMOTE CONTROL OPERATION

13

14

➀

➁

➂

➃

➅

➇

➉

➆

➠

POINT TOWARDS

TV

➈

➄

11

12

13

14

➀

Input Key—

Press to select the program source to

watch: TV, Video1, Video2, or Component2.

➁

Volume Keys—

Press

VOL – +

to adjust.

➂

Number Keys—

Press two keys to select a chan-

nel.

Example

: Press

0

then

6

to select channel 6.

(See #13.)

➃

Channel Scanning (CH

▲▼

) Keys—

Press to

scan through the channels in memory and AV

inputs.

➄

Menu Navigational Keys:

Menu—

Press to display on-screen menu.

Cursor

▲

(up)

▼

(down) keys—

Press these keys

to move the cursor up and down within the menu.

Cursor < (left) > (right) keys—

Press these keys

to move the cursor left and right within the menu.

Enter Key—

Press to select an option from the

menu system, when required.

Exit Key—

Press to exit from the menu system.

➃

OPERATING TIPS:

■

For Mono VCR (Single Audio Jack), connect

VCR Audio Out to DTV Audio (L) Input.

■

“No Signal” will appear randomly on the screen

when no signal is detected at the video jack.

COMPONENT2: GREEN, BLUE, RED

Specifications

Power Requirement:

Source: AC 120V, 60Hz

Power Consumption:

97 watts (Average)

DVD PLAYER

or

similar device

2

AUDIO L/R

JACKS

GREEN, BLUE,

RED JACKS

1

Printed in U.S.A. SMC, March 2007

•

32-H3FAM-BM

•

VB9H

•

GXCB

DTV BACK

REMOTE CONTROL

3

4

Press the POWER key.

(Follow on-screen instructions)

5

Perform “All Channel Search.”

The All Channel

Search will search for off-air digital and analog channels, and

analog cable channels. The DTV will receive cable or off-air

channels, but not at the same time.

If after two searches

the DTV still fails to detect any channels, the DTV will tune

to Video2.

Note: If

EXIT

is pressed, the

DTV will skip Channel Search

and tune to VIDEO2 without

storing any channels in the

Channel Map database.

Initial on-screen

ALL Channel Search

Analog

Digital

CAMCORDER

OR

Sanyo HT30547 Owners Manual

Sanyo HT30547 Manual

Sanyo HT30547 manual content summary: