Sanyo PDG-DET100L Instruction Manual, PDG-DET100L
Sanyo PDG-DET100L - SXGA+ DLP Projector Manual
 |
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PDG-DET100L manual content summary:
- Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 1
Multimedia Projector MODEL PDG-DET100L ✽ Projection lens is optional. Owner's Manual - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 2
projector utilizes built-in multimedia features. ◆ DLP® projector with high resolution This projector is projector. ◆ Active Maintenance Filter The projector monitors the condition of the filter and replaces a filter automatically when it detects the clogging. ◆ Helpful Maintenance Functions Lamp - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 3
the Filter Counter 64 Resetting the Scroll Counter 64 Lamp Management 65 Lamp Replacement 66 Optional Color Wheel Installation 68 Cleaning the Projection Lens 69 Cleaning the Projector Cabinet 69 Warning Indicators 70 Appendix 71 Troubleshooting 71 Menu Tree 74 Indicators and - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 4
of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 5
with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 6
61 and "Maintenance and Care" on pages 62-64. Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector. Top Panel Fig.1 Filter replacement icon AIR INTAKE VENT 6 EXHAUST VENT WARNING FILTER indicator Fig.2 F ilter cartridge - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 7
. 10˚ 10˚ CAUTION ON CEILING MOUNTING For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector does not cover any damage caused - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 8
by courier or any other transport service, consult your dealer. -Do not put the projector in a case before it is cooled enough. -Do not transport the projector with a replacement lens installed. How to move the projector by one person When moving the projector by one person, grip handles and - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 9
used in accordance with the instruction manual, may cause harmful interference replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers are available from the Parts Department indicated in your User Instructions - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 10
q Projection Lens (Option) w Indicators e Infrared Remote Receiver (Front) r Handle t Adjustable Feet y Side Control u Terminals and Connectors i Main On/Off Switch o Power Cord Connector !0 Lamp Cover ✽Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 11
B) USB connector is used to service the projector. w 5 BNC INPUT JACKS projector to this terminal. !0 R/C JACK When using the wired remote control, connect the wired remote control to this jack with a remote control cable (not supplied). !1 LAN port Connecting the LAN cable. See the owner's manual - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 12
e o r t !0 y !1 u !2 q ON/STAND-BY button Turn the projector on or off. (pp.24,25) w SHUTTER button Close and open up the LIGHT button Light the side control and around terminals. (p.28) o LENS SHIFT button Select the LENS SHIFT function. (p.28) !0 INPUT button Select an input source - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 13
(pp.61, 62, 79) t SHUTTER indicator Light blue when the shutter is closed. (p77) y LAMP 1 REPLACE indicator Turn orange when the life of the projection lamp1 draws to an end. (pp.66, 78) u LAMP 2 REPLACE indicator Turn orange when the life of the projection lamp2 draws to an end. (pp.66, 78) 13 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 14
spray, or any other chemical materials. 14 q ON/STAND-BY button Turn the projector on or off. (pp.24-25) w AUTO PC button Automatically adjust the ) -Pan the image in DIGITAL ZOOM +/- mode. (p.41) y LENS SHIFT button Select the LENS SHIFT function. (p.30) u FOCUS buttons Adjust the focus. (p.30) - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 15
of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 16
release the IMAGE ADJ. button the number of corresponding times you would like to set the number of the remote control code for the projector. Reset position Use position Reset switch Remote Control Code Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Number of Times Pressing IMAGE ADJ - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 17
For the specifications of Projection Lens, contact sales dealer where you purchased the projector. - Lens installation and replacement should be made by the qualified service personnel. - When setting the projector after lens installation, be sure to replace a Lens Cap to protect a surface. - When - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 18
of images easy on the screen. (See page 28) The display position can be shifted upward up to 55% elevation of the display. When the lens is shifted to top. The display position can be shifted downward up to 55% low level of the display. When the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 19
of interface board, turn off the projector, press the Main On/Off Switch to Off and unplug the AC power cord from the AC outlet. 1 Remove 2 Screws from an interface board. 2 Pull out the interface board. 3 Replace the interface board. Insert a new interface board along Guide to fit Plug into Socket - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 20
• VGA Cable (D-sub 15 pin) * • DVI Cable • BNC Cable (BNC x 5) ( *One cable is supplied; Other cables are not supplied with this projector.) Laptop type Desktop type Monitor Output Monitor Monitor Monitor Output Input v Output BNC Cable VGA Cable VGA Cable DVI Cable G B R H/HV V MONITOR - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 21
used for connection • Video Cable (BNC x 3, BNC x 1) • SCART-VGA Cable • DVI Cable • S-Video Cable • HDMI Cable ( Cables are not supplied with the projector.) Monitor Out Signal Table Input Terminal RGB (PC analog) D-sub15 RGB (SCART) Input 1 DVI-D RGB (PC digital) RGB (AV HDCP) HDMI HDMI RGB - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 22
with the provided straps to prevent the covers from falling off. Follow these steps to attach the support cover and cable cover. 1 Tie a strap (supplied) to the lower bracket on the right side of the projector's terminal area. (See the right figure.) 2 Fix the opposite end of the strap to the hole - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 23
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning on the projector. A fixing bracket is provided to prevent the AC power cord from coming loose. Follow these steps to - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 24
this manual and keep it on hand. Should the PIN code be missing or forgotten, consult your dealer or service center. 24 16 The preparation display will disappear after 20 seconds. Selected Input Source and Lamp control Lamp status See page 65 for the Lamp mode status ✔Note: • The Lamp replacement - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 25
FANS ARE RUNNING OR BEFORE THE POWER INDICATOR LIGHTS GREEN AGAIN. OTHERWISE IT WILL RESULT IN SHORTENING OF THE LAMP LIFE. ✔Note: •When the On start function is set to "On," the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.57). •The running speed - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 26
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control to display the On-Screen Menu. - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 27
(pp.40-41). i Setting Menu Used to set the projector's operating configurations (pp.49-61). o Information Menu Display the input source information (p.29). !0 Network Menu See the owner's manual of the Network Board. q w e rt y u i o q Guide Window Show the selected Menu of the On-Screen Menu - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 28
arrow turns red when the lens shift comes to the center position of the screen. ✔Note: • The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.60) • The SHUTTER indicator on the projector's top lights blue when the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 29
V-sync freq. values described in this figure may be different from the actual values. •SERIAL NO. is used to service the projector. •When the lamp life reaches a recommended lamp replacement time, the time shown in Lamp1 or Lamp2 turns red. •The total accumulated time of the filter use is shown - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 30
can be done easily by pressing this button. See page 36 for details. LENS SHIFT button See page 28 for details. ZOOM buttons Press the ZOOM buttons on for the description of other buttons. User 1 mode of PIP (example) Main picture Sub picture User 2 mode of PIP (example) Main picture Sub - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 31
the filter mechanically. See page 56 for details. ✔Note: •The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. IMAGE ADJ. button Press the IMAGE ADJ. button on the remote control to - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 32
Input Selection Input Side Control Side Control button operation INPUT button Side Control Operation Press the INPUT button on the side control. It switches to INPUT 1, INPUT 2, INPUT 3 and INPUT 4 as you press the INPUT button. Before using the INPUT button on the side control, you must select - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 33
Input Selection Computer Input Source Selection Menu Operation When Selecting the INPUT 1 with DVI/D-sub 15 terminals 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the INPUT Menu icon. INPUT MENU 2 Use the Point ed buttons to - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 34
(Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. •When a slot is empty, the input is displayed in grayout. - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 35
SXGA, SXGA+, WXGA, UXGA, or WUXGA (refer to "Compatible Computer Specifications" on pages 80-81). If a computer is selected as a signal source, this projector between your computer and the projector. (See "Troubleshooting" on page 71.) Mode 1 The preset system is manually adjusted in the PC Adjust - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 36
the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.35). See Manual PC Adjustment the DVI terminal and "480p," "575p," "480i," "575i," "720p," "1035i," "1080p," or "1080i" is selected on the PC SYSTEM Menu. •Depending on the condition of - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 37
Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. ✔Note: The PC Adjust Menu cannot be operated - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 38
Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the SELECT button. Move the red - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 39
press the SELECT button. Standard Normal picture level preset on the projector. Real Picture level with improved halftone for graphics. Dynamic For viewing DICOM For DICOM Part 14 grayscale standard compliant images. IMAGE 1-10 User preset picture adjustment in the Image Adjust Menu. (p.48) IMAGE - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 40
original image size is larger than the screen size (1400 x 1050), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to Menu is used. (p.38) Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 41
this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 42
System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080p, - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 43
press the SELECT button. Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. Dynamic For viewing DICOM For DICOM Part 14 grayscale standard compliant images. IMAGE 1-10 User preset picture adjustment in the Image Adjust Menu. (p.48) IMAGE SELECT - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 44
wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom ✔Note: •Wide cannot be operated when "720p," "1035i," "1080i", or "1080p" is selected on AV System Menu (p.42). Press the SELECT button at Common - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 45
this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 46
can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required. You can store up to eight (8) color management data. 1 Use the Point ed buttons to move the red - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 47
COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu. Any - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 48
is "On." Film For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. ✔Note: •Picture is distorted cannot be selected when "480p," "575p," "720p", or "1080p" is selected (p.42). •Noise reduction cannot be selected with the computer input - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 49
when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright Auto PC adjustment (p.36) ● Arrows for panning mode ● Warnings for lens and color wheel installations. Menu Set the red frame pointer to the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 50
will shutdown automatically. • When either of the two lamps does not light up, the LAMP 1/2 REPLACE indicator blinks orange and the projector will light the other automatically. (X mark will appear on the unlighted lamp in the Lamp Status Display. See page 65 for details.) ✔Note: • The fan - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 51
you want to delete and press the SELECT button. Then the confirmation box appears. To delete, select [Yes]. Store Store the adjusted data in the User 1-5. Use the Point 7 8 buttons to select Store and press the SELECT button to show the 'Where to store?' dialog box. Move the red arrow pointer - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 52
To reset, press the SELECT button at [Yes]. Quit Exit the Edge blending menu. Color matching When multiple sets are used simultaneously, this projector allows the user to correct the difference of colors among the sets. Use the Point ed buttons to move the red frame pointer to Color matching and - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 53
Target) Red/Green/Blue/Cyan/ Magenta/Yellow/White. Quit Exit the Color matching menu. DynamicBlack DynamicBlackTM improves the black level of the projector. Black level is the darkest part of a picture and varies between viewing devices and environments. Set DynamicBlack Off/Low/High. Advanced - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 54
vary from equipment to equipment. For details, refer to the owner's manual of video equipment. When the black parts of the image are destroyed or function and set it to "User". Then the captured image will be displayed the next time you turn on the projector. Capture To cancel the Capture - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 55
Setting Logo PIN code lock This function prevents an unauthorized person from changing the screen logo. Off The screen logo can be changed freely from the Logo Menu. On The screen logo cannot be changed without a Logo PIN code. If you want to change the Logo PIN code lock setting, press the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 56
being scrolled. • The filter cannot be rewound. • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. • If the filter cartridge is not installed in the projector, 'Filter control' is displayed in grayout. Remote control The eight different remote - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 57
Setting Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. If the input signal is interrupted and no button is pressed for more than 30 seconds, the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 58
becomes locked and you do not have the remote control nearby and unable to operate the projector, contact the service station. PIN code lock This function prevents the projector from being operated by unauthorized persons and provides the following setting options for security. Off Unlocked - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 59
pin code no. memo on page 86, and keep it securely. If you forget your pin code, the projector can no longer be started. Projector ID This feature allows users to set serial communication configuration (Projector ID) when several projectors are connected via the RS-232C terminal (serial port) of the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 60
to prohibit the shutter operation from both of the remote control and the side control. Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 61
needs replacement. To replace the filter, use the filter control function (p.56). Test pattern Various test patterns are available for use when setting up the projector. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 62
filter, but there is no problem for the use of the projector. •Do not use the filter cartridge with other projector. The filter counter and lamps are turned off when you are replacing the filter cartridge. If you replace the filter cartridge when the projection lamps are turned on, the projector - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 63
be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector PDG-DET100L ● Replacement Filter Cartridge Type No. : POA-FIL-131 (Service Parts Code: 610 334 3747) Maintenance and Care Filter cover Filter cartridge Tab 63 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 64
Another confirmation dialog box appears, select [Yes] to reset the Filter counter. Resetting the Scroll Counter Be sure to reset the Scroll counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 65
and flash when any of them becomes out. Check the number of lamp on the Lamp Status Display or the LAMP 1/2 REPLACE indicators and replace the lamp. Lamp Status Display The Lamp Status Display appears on screen when the projector is turned on or the input position (input 1, input 2, Input 3 or input - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 66
steps to replace the lamp. For continued safety, replace with a lamp assembly of the same type. Do not drop the lamp assembly or touch a glass bulb! The glass can shatter and may cause injury. 1 Check the number of lamp to be replaced on the Lamp Status Display. 2 Turn off the projector, press - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 67
information to the dealer. ● Model No. of your projector : PDG-DET100L ● Replacement Lamp Type No. : POA-LMP130 (Service Parts No. 610 343 5336) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 68
from the AC outlet. Let the projector cool for at least 45 minutes. LAMP 2 Loosen a screw on the Lamp Cover. Slide and open the Lamp Cover. (See the right figure.) COVER 3 Loosen three screws and pull out the color wheel to be replaced by grasping handle. 4 Replace the color wheel with a new - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 69
harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Turn off the projector, press the Main On/Off Switch to Off AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 70
been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Replace the filter with a new one. The projector is shut down; and the LAMP indicator is lighting and other indicators are blinking. When the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 71
Lamp mode icon appears. - That is the Lamp replacement icon or the Filter warning icon. See pages 61, 66. No image. - Check the connection between your computer or video equipment and the projector connected to the projector. See your computer's instruction manual for the setting. - It takes - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 72
lamp life is approaching. Replace the lamp with a new one promptly. (See page 66) - The filter is out of scroll. Replace the filter cartridge with a new one promptly. (See pages 62-63) appears on the screen The image is out of focus. - Adjust the focus of the projector. - Check Projection Lens - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 73
center. WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 74
Input H-sync freq. V-sync freq. Screen Language Lamp mode Lamp control Lamp interval Lamp 1 Lamp 2 Filter counter Power management Security Key lock PIN code lock Remote control Shutter management Remote Control Projector Color wheel type Lens type 5 - 180 Min SERIAL NO. Image Adjust - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 75
Keystone Ceiling Rear Reset Quit Scale H &V Position Common Reset H /V On/Off H /V Quit Store Reset On/Off On/Off Yes/No Screen System (3) Auto 1080p 1080i 1035i 720p 575p 480p 575i 480i Normal Wide Custom Keystone Ceiling Rear Reset Quit Scale H &V Position Common Reset Quit H /V On/Off - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 76
Menu size/Quit Off/Countdown Off/On Blue/User/Black 2-Lamps/Lamp1/Lamp2 Lamp control Normal/Eco1/Eco2 Lamp life control Mode 1/Mode 2 Off/Auto/ Yes/No Yes/No Shutter Protection Filter counter Management Quit Used time Remote control Projector 5 - 180 Min. On / Off On / Off [ ] Hour(s) - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 77
cooled down in the Power management mode. ✽ ✽ The projector is in the Power management mode. ✽ ✽ ✽ ✽ Fig.1 Filter replacement icon and "Please wait..." ✽ The projection lamp is being cooled down in the Shutter management mode. The projector is in the Shutter management mode. ✽ Press the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 78
to be turned on with the ON/ STAND-BY button.) ✽ ✽ ✽ When either of the 2 lamps is out, the projector operates with 1 lamp. ✽ ✽ ✽ ✽ ✽ The lamp has been used overtime. Replace the lamp immediately. WARNING FILTER When the filter detects clogging, reaches a time set in the timer setting or - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 79
is detecting abnormal condition. POWER green LAMP red Indicators WARNING WARNING TEMP. FILTER SHUTTER LAMP 1/2 REP. red orange blue orange Projector Condition ✽ ✽ Fig.2 Filter replacement icon Fig.3 Fig.4 Filter cartridge replacement icon If the Filter counter reached a time - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 80
Compatible Computer Specifications Basically this projector can accept the signal from 60.010 67.190 76.107 ON-SCREEN DISPLAY SXGA 8 SXGA 9 SXGA 10 SXGA 11 SXGA 12 SXGA 13 SXGA 14 SXGA 15 SXGA 16 SXGA 17 SXGA 18 SXGA 19 SXGA 20 SXGA+ 1 SXGA+ 2 SXGA+ 3 SXGA+ 4 SXGA+ 5 MAC 21 MAC MAC WXGA 1 WXGA 2 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 81
9 D-WXGA 10 D-WXGA 11 D-SXGA 1 D-SXGA 2 D-SXGA+ 1 D-SXGA+ 2 D-SXGA+ 3 RESOLUTION H-Freq.(kHz) V-Freq System mode D-575p D-720p D-720p D-1080i D-1080i D-1080p D-1080p D-1080p RESOLUTION 720x575 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 H- projector could be limited. 81 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 82
the Main/Sub picture. • Inputting PC analog signals: Between 100-160 MHz • Inputting AV analog signals: 1080p • Inputting PC analog signals: More than 160MHz • Inputting PC digital signals: More - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 83
, 1080p, and 1080i Scanning Frequency H-sync. 15 kHz-120 kHz, V-sync. 48 Hz-120 Hz Optical Information Projection Lamp 330 W UHP lamp x Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable PIN Code Label Cable covers (support cover & - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 84
POA-MD21WARP ✔Note: • When you use the WARP & BLENDING board, you should set the Edge blending function of this projector to 'Off' and do not use the Edge blending function of this projector. • Between the two features of the provided Real Color Manager Pro (CD-ROM); "Color Correction" and "Gamma - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 85
Appendix Configurations of Terminals ANALOG (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 DIGITAL DVI-D (DVI 24 PIN) 12345678 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Input 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 86
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Logo PIN Code Lock No. Factory default set No: 1 2 3 4* Factory default set - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 87
Dimensions Unit: inch (mm) 5.0º 4.45(113.0) Appendix 0.28(7.0) 15.75(400.0) 9.21(234.0) 9.55(242.5) Screw Holes for Ceiling Mount Screw: M8 Depth: 0.393 (10.0) 6.81(173.0) 6.81(173.0) 6.02(153.0) 5.63(143.0) 2.64(67.0) 4.65(118.0) 5.08(129.0) 4.25(108.0) 12.48(317.0) 14. - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 88
C05 C06 C07 C08 C0D C0E C0F C10 C1C C1D C3A Function Turn the projector ON Turn the projector OFF (immediately OFF) Select Input 1 Select Input 2 Select Input 3 Select DOWN Focus UP Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 89
command. Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by mode after Cooling down at the temperature anomaly. Cooling down when the - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 90
procedure.) Change the Right width to 100. Set to 'On'. Change the Left width to 100. Green frame Green frame Image A Red line Red line Image B • The blending widths of each projector overlap the shaded areas by using the lens shift function. When the shaded areas are overlapped with each - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 91
and adjust the color settings (Red/Green/Blue/White). (Refer to page 53 for operation procedure.) 7 Select 'Advanced color matching' if you need further adjustment. In the Advanced color Apply the same adjustment to the other projector if necessary.) Fig.1 For rich color reproduction color wheel 91 - Sanyo PDG-DET100L | Instruction Manual, PDG-DET100L - Page 92
KJ5AL SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
 |
 |
Multimedia Projector
MODEL
PDG-DET100L
Owner’s Manual
✽
Projection lens is optional.