Sanyo PDG-DHT8000L Owners Manual - Page 28

Basic Operation Operating with Projector Control Zoom Adjustment Press the ZOOM button and "Zoom" will be displayed on the screen. And then press the Point ed buttons to zoom in and out the image. Focus Adjustment Press the FOCUS button and "Focus" will be displayed on the screen. And then press the Point ed buttons to adjust the focus of the image. Lens Shift Adjustment Press the LENS SHIFT button and "Lens shift" will be displayed on the screen. Use the Point ed7 8 buttons to position the screen to the desired point without having picture distortion. The screen can be moved up or down to 67.7 percent, or sideways up to 41.6 percent from the central axis of the lens shift. Press and hold the LENS SHIFT button for more than 5 seconds to return to the central position. See page 18 for details. Side Control AUTO PC ADJ. button SHUTTER button LIGHT button ZOOM button LENS SHIFT button FOCUS button POINT buttons INFORMATION button Zoom Auto PC Adjustment Operate the Auto PC Adj. function. The computer screen adjustment can be done easily by pressing this button. See page 36 for details. Focus Light Function Light function is used to turn on the lights on the side control and around terminals. To turn off the lights, press the Light button again. ✔Note: • The buttons on the side control except for the LIGHT button and ON/STAND-BY button do not light up when the projector is in stand-by mode or during the cooling down period. Shutter Function Shutter function allows you to completely block out light to the screen. Press the SHUTTER button to close the shutter inside the projector. To open up the shutter, press the SHUTTER button again. Refer to p.60 for detail of setting for the Shutter function. ✔Note: •The arrow disappears at the maximum lens shift in each direction. •The arrow turns red when the lens shift comes to the center position of the screen. ✔Note: • The SHUTTER button on the side control and the remote control cannot be effective when Shutter Protection is "On" in the Setting menu. (p.60) • The SHUTTER indicator on the projector's top lights blue when the shutter is closed. (pp.13, 79) • The projector will shut down automatically when the set time on Shutter management has passed. (p.60) • The Power management function does not work when the shutter is closed. (p.57) 28