Sanyo PDG-DHT8000L Owners Manual - Page 79

Appendix Indicators and Projector Condition Check the indicators for the projector condition. The projector is operating normally. POWER green LAMP red Indicators WARNING WARNING TEMP. FILTER red orange SHUTTER blue LAMP 1/2 REP. orange Projector Condition The projector is off. (The main On/Off switch is OFF position or the AC power cord is unplugged.) The projector is in stand-by mode. Press the ON/ ✽ ✽ ✽ STAND-BY button to turn on the projector. The projector is operating normally. ✽ ✽ (The Shutter is open) The projector is operating normally. ✽ ✽ (The Shutter is closed) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector ✽ ✽ ✽ cannot be turned on until cooling is completed and the POWER indicator lights green. The projection lamp is being cooled down in the ✽ ✽ Power management mode. ✽ ✽ The projector is in the Power management mode. ✽ ✽ ✽ ✽ Fig.1 Filter replacement icon and "Please wait..." The projection lamp is being cooled down in the ✽ Shutter management mode. The projector is in the Shutter management mode. ✽ Press the ON/STAND-BY button to turn on the projector. ✽ The filter is scrolled using the FILTER button on the remote control or the Filter control function in the setting menu. When the filter is being scrolled, the Filter replacement icon and "Please wait..." message (Fig. 1) appear on the screen. • • • on dim off blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • •blinking fast (approx. 0.5 seconds ON, 0.5 seconds OFF) • • • b linking slow (approx. 2 seconds ON, 2 seconds OFF) Differs according to conditions. 79