Sanyo PDG-DHT8000L RS232C Basic
Sanyo PDG-DHT8000L - 8000 Lumens Manual
 |
View all Sanyo PDG-DHT8000L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PDG-DHT8000L manual content summary:
- Sanyo PDG-DHT8000L | RS232C Basic - Page 1
BASIC SERIAL COMMAND FUNCTIONAL SPECIFICATIONS PDG-DHT8000L Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Business Division - Sanyo PDG-DHT8000L | RS232C Basic - Page 2
PDG-DHT8000L Basic Serial Command Functional Specifications Contents 1 Overview ...4 2 Serial Interface Specification 4 2.1 Transfer Specification 4 2.2 Connection ...4 3 Notes for Communication 5 4 Functional Execution Command Table 6 5 Status Read Command Table 6 6 Functional Execution - Sanyo PDG-DHT8000L | RS232C Basic - Page 3
PDG-DHT8000L Basic Serial Command Functional Specifications 6.32 LENS SHIFT UP Command 13 6.33 LENS SHIFT DOWN Command 13 6.34 LENS SHIFT LEFT Command 13 6.35 LENS SHIFT RIGHT Command 13 6.36 AUTO PC ADJ. Command 13 6.37 PRESENTATION TIMER Command 14 6.38 KEYSTONE Command 14 6.39 KEYSTONE - Sanyo PDG-DHT8000L | RS232C Basic - Page 4
This specification defines projector control commands for the PDG-DHT8000L. The projector control commands are designed to remote-control a projector through RS-232C from a computer. Refer to [8. Command with Address Specification] when using commands with address. 2 Serial Interface Specification - Sanyo PDG-DHT8000L | RS232C Basic - Page 5
PDG-DHT8000L Basic Serial Command Functional Specifications 3 Notes for Communication The projector command is defined one command per line that starts "C" and ends carriage return (0x0D). When the projector 1) [ZOOM UP/DOWN] [FOCUS UP/DOWN] [LENS SHIF UP/DOWN/LEFT/ RIGHT] commands...100ms 2) Other - Sanyo PDG-DHT8000L | RS232C Basic - Page 6
PDG-DHT8000L Basic Serial Command Functional Specifications 4 Functional Execution Command Table Command Item C90 C91 Item FREEZE ON FREEZE OFF ZOOM ZOOM + FOUCS FOUCS + LENS SHIFT UP LENS SHIFT DOWN LENS SHIFT LEFT LENS SHIFT RIGHT AUTO PC ADJ. PRESENTATION TIMER KEYSTONE ↑ KEYSTONE ↓ KEYSTONE - Sanyo PDG-DHT8000L | RS232C Basic - Page 7
PDG-DHT8000L Basic Serial Command Functional Specifications 6 Functional Execution Command 6.1 Format 1) PC issues a command in the format below: "C" Command [CR] Command: two characters (Refer to Functional Execution Command Table) 2) A projector decodes the received data and returns the result - Sanyo PDG-DHT8000L | RS232C Basic - Page 8
PDG-DHT8000L Basic Serial Command Functional Specifications 6.4 Operation Requirements When the projector is in the status below, Functional Execution Commands are limited. (Status Read Commands are available in following status) Projector Status Available Functional Execution Commands In - Sanyo PDG-DHT8000L | RS232C Basic - Page 9
PDG-DHT8000L Basic Serial Command Functional Specifications 6.8 INPUT 2 Command COMMAND "C06" [CR] Detail Select Input 2 Note) When there is no board inserted to Input 2, it is not executed. Response Acceptable [ACK] [CR] - Sanyo PDG-DHT8000L | RS232C Basic - Page 10
PDG-DHT8000L Basic Serial Command Functional Specifications 6.14 SCREEN FULL SIZE Command COMMAND "C10" [CR] IMAGE Command COMMAND "C27" [CR] Detail Switch Image setting. In the case of the projector and remote control possessing an "IMAGE" button, this command work as an "IMAGE" function. - Sanyo PDG-DHT8000L | RS232C Basic - Page 11
PDG-DHT8000L Basic Serial Command Functional Specifications 6.20 D.ZOOM - Command COMMAND "C31" [CR] On Screen Display Menu to the right This command works the same way as "►" button of the projector and remote control. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.22 POINTER LEFT - Sanyo PDG-DHT8000L | RS232C Basic - Page 12
PDG-DHT8000L Basic Serial Command Functional Specifications 6.26 FREEZE ON Command COMMAND "C43" [ clear) with a long-focal-length ( ) (The lens direction is backward) This command works the same way as "FOCUS ▲" button of the projector and remote control. Response Acceptable [ACK] [CR] - Sanyo PDG-DHT8000L | RS232C Basic - Page 13
PDG-DHT8000L Basic Serial Command Functional Specifications 6.31 FOCUS - Command COMMAND "C4A" [CR] Detail Adjust focus of screen image (sharp and clear) with a short-focal-length (The lens direction is forward) This command works the same way as "FOCUS ▼" button of the projector and remote - Sanyo PDG-DHT8000L | RS232C Basic - Page 14
PDG-DHT8000L Basic Serial Command Functional Specifications 6.37 PRESENTATION TIMER Command COMMAND Detail Response "C8A" [CR] Start timer to count time for presentation This command works the same way as "P-TIMER" button - Sanyo PDG-DHT8000L | RS232C Basic - Page 15
PDG-DHT8000L Basic Serial Command Functional Specifications 7 Status Read Command 7.1 Format 1) PC issues a command in the format below: "CR" Command [CR] Command: Single character (Refer to Status Read Command Table) 2) When a projector receives the appropriate command, it returns the required - Sanyo PDG-DHT8000L | RS232C Basic - Page 16
PDG-DHT8000L Basic Serial Command Functional Specifications 7.3 Status Read Command COMMAND "CR0" [CR] Detail Get the projector status Acceptable "%1" [CR] Response Down status. This status automatically moves to Standby when the lamp is turned off and the fan spin finishes after about 90 - Sanyo PDG-DHT8000L | RS232C Basic - Page 17
PDG-DHT8000L Basic Serial Command Functional Specifications "10" [CR] Status: Power Failure When the power supply voltage inside the projector reaches abnormal level, the status automatically moves to Power OFF. Abnormal power supply voltage includes; Filter abnormal status Shutter abnormal status - Sanyo PDG-DHT8000L | RS232C Basic - Page 18
PDG-DHT8000L Basic Serial Command Functional Specifications "21" [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector returns "21" [CR]. "81" [CR] - Sanyo PDG-DHT8000L | RS232C Basic - Page 19
PDG-DHT8000L Basic Serial Command Functional Specifications 7.4 Input Mode Read Command COMMAND "CR1" [CR] Detail Get currently selected SLOT space between each of them. %1 = lamp No.1 %2 = lamp No.2 ex; "00410_00410" [CR Lamp No.1 = 410 Hours Lamp No.2 = 410 Hours Unacceptable "?" [ - Sanyo PDG-DHT8000L | RS232C Basic - Page 20
PDG-DHT8000L Basic Serial Command Functional Specifications 7.7 Temp Read Command COMMAND "CR6" [CR] Detail Get the temperature information inside projector With more than one temperature sensors installed in the projector, it is possible to get all temperatures at once. Acceptable "%1 %2 %3 - Sanyo PDG-DHT8000L | RS232C Basic - Page 21
PDG-DHT8000L Basic Serial Command Functional Specifications 8 Command with Address Specification 8.1 Overview - Commands with address are used to control more than one projector remotely through RS-232C by a single computer. - The command with address is defined as a single command per line that - Sanyo PDG-DHT8000L | RS232C Basic - Page 22
PDG-DHT8000L Basic Serial Command Functional Specifications 8.2 Functional Execution Command with address 8.2.1 Format 1) PC issues a command in the format below: "A" Address "C" Command [CR] or "C" Address "CF□" Command "□" Parameter [CR] Address when the address is "FFF", the projector executes the - Sanyo PDG-DHT8000L | RS232C Basic - Page 23
PDG-DHT8000L Basic Serial Command Functional Specifications 8.3 Status Read Command with Address 8.3.1 Format 1) PC issues a command in the format below: "A" Address "CR" Command [CR] or "A" Address "CR□" Command [CR] Address ) 2) The only projectors that have the address matching with the one
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
 |
 |
BASIC SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
PDG-DHT8000L
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Business Division