Sanyo PDG-DWL100 RS232C Basic

Sanyo PDG-DWL100 - WXGA DLP Projector Manual

Get Sanyo PDG-DWL100 - WXGA DLP Projector PDF manuals and user guides
UPC - 086483074875
View all Sanyo PDG-DWL100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DWL100 manual content summary:

  • Sanyo PDG-DWL100 | RS232C Basic - Page 1
    BASIC SERIAL COMMAND SPECIFICATIONS PDG-DWL100 Ver. 1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DWL100 | RS232C Basic - Page 2
    PDG-DWL100 Basic Serial Command Specifications CONTENTS 1 Overview ...4 2 Serial Interface Specification 4 2.1 Transfer Specification 4 2.2 Connection ...4 3 Notes for Communication 5 4 Functional Execution Command Table 6 5 Status Read Command Table 6 6 Functional Execution Command 7 6.1
  • Sanyo PDG-DWL100 | RS232C Basic - Page 3
    PDG-DWL100 Basic Serial Command Specifications 6.32 YPbPr 1 Command 14 6.33 POINTER RIGHT Command Command 15 7 Status Read Command 16 7.1 Format ...16 7.2 Transfer Example 16 7.3 OSD ...16 7.4 Status Read Command 17 7.5 Input Mode Read Command 18 7.6 Lamp Time Read Command 18 7.7 Setting
  • Sanyo PDG-DWL100 | RS232C Basic - Page 4
    PDG-DWL100 Basic Serial Command Specifications 1 Overview 1.1. This specification defines projector control commands for the PDG-DWL100 series. 1.2. The projector control commands are designed to remote-control a projector through RS-232C and LAN from a computer. 2 Serial Interface Specification
  • Sanyo PDG-DWL100 | RS232C Basic - Page 5
    PDG-DWL100 Basic Serial Command Specifications 3 Notes for Communication 3.1. The communication speed can be changed in menu. It starts to decode when the projector commands. 3.8. When the projector receives the commands for internal initialization or Iighting the lamps in 7seconds after starting
  • Sanyo PDG-DWL100 | RS232C Basic - Page 6
    PDG-DWL100 Basic Serial Command Specifications 4 Functional Execution Command Table Command C10 Aspect 16:10 C11 Image mode Presentation C12 Image mode Movie C13 Image mode sRGB C14 Image mode Bright C15 Image mode User C1C MENU ON CR4 CR6 CR7 Lamp Time Read Setting Read Temp. Read
  • Sanyo PDG-DWL100 | RS232C Basic - Page 7
    PDG-DWL100 Basic Serial Command Specifications 6 Functional Execution Command 6.1 Format ① PC issues a command in the format below: "C" Command [CR] Command: 2 characters (Refer to the Functional Execution Command Table.) ① The projector decodes the received data and returns the result after getting
  • Sanyo PDG-DWL100 | RS232C Basic - Page 8
    PDG-DWL100 Basic Serial Command Specifications 6.4 Operation Requirements The Functional Execution Commands are limited, when the projector is in the status below. (The Status Read Commands are available in following status.) Projector Status Available Functional Execution Commands In Standby
  • Sanyo PDG-DWL100 | RS232C Basic - Page 9
    PDG-DWL100 Basic Serial Command Specifications 6.5 POWER ON Command COMMAND "C00" [CR] Detail Set Power On. (Same as the "Power On" key on the projector body / remote controller.) No operation is started when the projector has been turned on already. "Count Down" is terminated by receiving this
  • Sanyo PDG-DWL100 | RS232C Basic - Page 10
    PDG-DWL100 Basic Serial Command Specifications 6.11 Volume - Command COMMAND "C0A" [CR] Detail This command turns down the Volume. This command works the same as "VOLUME " button of the projector and remote control. The projector shows the OSD "Volume" at receiving the command. Response
  • Sanyo PDG-DWL100 | RS232C Basic - Page 11
    PDG-DWL100 Basic Serial Command Specifications 6.15 Video Mute OFF Command COMMAND "C0E" [CR] Detail This command sets AV Mute OFF. It releases the "Video Mute", but does not release "Sound Mute". It works immediately after the command is transmitted. The projector shows the OSD "AV-Mute" at
  • Sanyo PDG-DWL100 | RS232C Basic - Page 12
    PDG-DWL100 Basic Serial Command Specifications 6.20 Image mode sRGB Command COMMAND "C13" [CR] Detail Set Image mode to sRGB. This command changes Image mode immediately into sRGB. The projector shows the OSD "sRGB" on the screen at receiving the command. Response Acceptable [ACK] [CR]
  • Sanyo PDG-DWL100 | RS232C Basic - Page 13
    PDG-DWL100 Basic Serial Command Specifications 6.26 Scart Command COMMAND "C26" [CR] Detail Select "Scart" The projector shows the OSD "Scart" → Bright → Movie → RGB User The behavior is the same as the "IMAGE" key on the remote control. The projector shows Image OSD at receiving the
  • Sanyo PDG-DWL100 | RS232C Basic - Page 14
    PDG-DWL100 Basic Serial Command Specifications 6.32 YPbPr 1 Command COMMAND "C35" [CR] Detail Select "YPbPr 1" The projector shows the OSD "YPbPr 1" at receiving the command. Response Acceptable [ACK] [CR] Unacceptable "?" [CR] 6.33 POINTER RIGHT Command COMMAND "C3A" [CR] Detail Move
  • Sanyo PDG-DWL100 | RS232C Basic - Page 15
    PDG-DWL100 Basic Serial Command Specifications 6.38 FREEZE ON Command COMMAND "C43" [CR] Detail Freeze the projecting image. The behavior is the same as "FREEZE" button of the remote control except the command only freezes the image and does not cancel it. The projector shows the OSD "Freeze" at
  • Sanyo PDG-DWL100 | RS232C Basic - Page 16
    PDG-DWL100 Basic Serial Command Specifications 7 Status Read Command 7.1 Format 1) PC issues a command in the format below: "CR" Command [CR] Command: Single character (Refer to Status Read Command Table) 2) When a projector receives the appropriate command, it returns the required information as a
  • Sanyo PDG-DWL100 | RS232C Basic - Page 17
    PDG-DWL100 Basic Serial Command Specifications 7.4 Status Read Command COMMAND "CR0" [CR] Detail Get the projector status Acceptable "%1" [CR] Response "00" = Cooling Down status. This status automatically moves to Standby when the lamp is turned off and the fan spin finishes after about 90
  • Sanyo PDG-DWL100 | RS232C Basic - Page 18
    PDG-DWL100 Basic Serial Command Specifications Even if the temperature comes down during this process, the given Cooling Down process is executed and it moves to Standby mode. "21" [CR] Status: Cooling Down in process after turned off due to lamp failure When a projector is turned off because of
  • Sanyo PDG-DWL100 | RS232C Basic - Page 19
    PDG-DWL100 Basic Serial Command Specifications 7.8 Temp Read Command COMMAND "CR6" [CR] Detail Get the temperature information inside projector With more than one temperature sensors installed in the projector, it is possible to get all temperatures at once. Acceptable "%1" [CR] %1 =
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
BASIC SERIAL COMMAND SPECIFICATIONS
PDG-DWL100
Ver. 1.00
SANYO Electric Co., Ltd
DS Company
Projector Division