Sanyo PDG-DWL2500 RS232C Basic

Sanyo PDG-DWL2500 - 2500 Lumens Manual

Get Sanyo PDG-DWL2500 - 2500 Lumens PDF manuals and user guides
UPC - 086483079061
View all Sanyo PDG-DWL2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DWL2500 manual content summary:

  • Sanyo PDG-DWL2500 | RS232C Basic - Page 1
    BASIC SERIAL COMMAND SPECIFICATIONS PDG-DWL2500 Ver.1.00 SANYO Electric Co., Ltd DS Company Projector Division
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 2
    PDG-DWL2500 Basic Serial Command Specifications CONTENTS 1. Overview ...4 2. Serial Interface Specifications 4 2.1. Transfer Specifications 4 2.2. Connection ...4 3. Notes for Communication 5 4. Functional Execution Command Table 6 5. Status Read Command Table 8 6. Functional Execution Command
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 3
    PDG-DWL2500 Basic Serial Command Specifications 6.32. BRIGHTNESS - Command 15 6.33. IMAGE (Toggle) Command 16 6.34. 7.3. Operation Requirements 21 7.4. Status Read Command 22 7.5. Input Mode Read Command 24 7.6. Lamp Time Read Command 24 7.7. Setting Read Command 24 7.8. Temp Read Command 24
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 4
    Specifications 1. Overview 1.1. These specifications define projector control commands for PDG-DWL2500. 1.2. The projector control commands are used to remotely control a projector through RS-232C from a computer. 2. Serial Interface Specifications 2.1. Transfer Specifications Item Specifications
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 5
    PDG-DWL2500 Basic Serial Command Specifications 3. Notes for Communication 1. The projector control command is defined as one wait for the interval of 100ms after receiving a response. More than 100ms PC → Projector Projector → PC Command "C" "0" "7" CR ACK CR Next Command Response (A few ms
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 6
    PDG-DWL2500 Basic Serial Command Specifications 4. Functional Execution Command Table Command Item C00 POWER ON C01 POWER OFF (Quick Power OFF) C02 POWER OFF C03 ――― C04 HDMI C05 Computer 1 C06 Computer 2
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 7
    PDG-DWL2500 Basic Serial Command Specifications Command C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C4A C4B C4C C4D C4E C4F C50 C51 C52 C53 C54 C55 C56 C57
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 8
    PDG-DWL2500 Basic Serial Command Specifications 5. Status Read Command Table Command Item CR0 CR1 CR2 Status Read Input Mode Read ――― CR3 (Corresponding) Lamp Time Read CR4 CR5 Setting Read ――― CR6 Temp Read CR7 Lamp Mode Read ――― means no function. Memo 8/25
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 9
    PDG-DWL2500 Basic Serial Command Specifications 6. Functional Execution Command 6.1. Format 6.1.1 PC issues a command in format as below. "C" COMMAND [CR] Command: two characters (See Basic Functional Execution Command Table) A projector the same as that of the remote control; 6.2.1. System: issues
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 10
    PDG-DWL2500 Basic Serial Command Specifications 6.4. Operation Requirements 1) When the projector's status is any of below, Functional Execution Commands are limited. Projector Status In standby status Countdown in process Cooling Down in process Cooling Down due to Abnormal Temperature Abnormal
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 11
    PDG-DWL2500 Basic Serial Command Specifications 6.5. POWER ON Command Command "C00" [CR] Detail (Standby). The command operates the same Power OFF function as ON/STAND-BY button of the projector and the remote control. Once this command is sent, "Power OFF?" is displayed. If this command is
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 12
    PDG-DWL2500 Basic Serial Command Specifications 6.10. Computer 2 Command Command "C06" [CR] Detail Select Computer2 Input Although projector This command operates the same way as "VOLUME-" button of the projector and the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 13
    PDG-DWL2500 Basic Serial Command Specifications 6.15. AUDIO MUTE OFF Command Command "C0C" [CR] Detail Sound Mute OFF. This command works the same as "MUTE" button of the remote control for Mute OFF, but does not work for Mute ON. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.16.
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 14
    PDG-DWL2500 Basic Serial Command Specifications 6.21. Image Real Command Command "C12" [CR] Detail Set image to Real mode. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.22. Image Cinema Command Command "C13" [
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 15
    PDG-DWL2500 Basic Serial Command Specifications 6.28. MENU ON Command Command "C1C" [CR] Detail Display On-Screen Display Menu " "[CR] 6.31. BRIGHTNESS + Command Command "C20" [CR] Detail Brightness of User Control +1. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.32. BRIGHTNESS -
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 16
    PDG-DWL2500 Basic Serial Command Specifications 6.33. IMAGE (Toggle) Command Command "C27"[CR] Detail Switch Image Setting status. This command works the same as "IMAGE" button of the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.34. Direct on Setting Command Command
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 17
    PDG-DWL2500 Basic Serial Command Specifications 6.39. D.ZOOM + Command Command "C30" [CR] Detail Enter Digital Zoom mode and expand image size. This command works the same as "D.ZOOM ▲" button of the remote from the pointer "
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 18
    PDG-DWL2500 Basic Serial Command Specifications 6.45. POINTER DOWN Command Command "C3D" [CR] Detail Move down the Pointer of On-Screen Display Menu. This command works the same as the pointer "▼" of the projector and the remote control. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 6.
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 19
    PDG-DWL2500 Basic Serial Command Specifications 6.51. Computer 1 Analog RGB Command Command "C50" [CR] Detail Select Analog RGB in Computer 1 input. Although projector the same as "AUTO PC ADJ." button of the remote control. Sending the command during Auto PC Adj. operation stops the operation. This
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 20
    PDG-DWL2500 Basic Serial Command Specifications 6.57. KEYSTONE ↓Command Command "C8F" [CR] Detail Correct keystone distortion by reducing down part of image. Acceptable Response [ACK] [CR] Unacceptable " "[CR] 20/25
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 21
    PDG-DWL2500 Basic Serial Command Specifications 7. Status Read Command 7.1. Format 7.1.1. PC issues commands in format as below; "CR" Command [CR] Command 1 character(See Basic Status Read Command Table) 7.1.2. When a projector receives the appropriate command, it returns a character line as the
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 22
    PDG-DWL2500 Basic Serial Command Specifications 7.4.Status Read Command Command "CR0" [CR] Detail Get the projector's operating status Acceptable "%1" [CR] to Cooling Down status. This status automatically moves to Standby after lamp turns off and the fan spin finishes after about 90 seconds.
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 23
    PDG-DWL2500 Basic Serial Command Specifications executed). This status moves to Power Save at set hours after the operation of Cooling Down. Status No signal lamp failure When a projector is turned off because of lamp failure, it automatically starts Cooling Down operation, in which the projector
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 24
    PDG-DWL2500 Basic Serial Command Specifications Lamp Time Read Command Command "CR3" [CR] Detail Get the total lamp running hours (Not actual lamp used hour the projector. With some temperature sensors installed in the projector, it returned due to hardware %3 problems, the first character becomes
  • Sanyo PDG-DWL2500 | RS232C Basic - Page 25
    PDG-DWL2500 Basic Serial Command Specifications 7.9.Lamp Mode Read Command Command "CR7" [CR] Detail Get lamp mode status. For 1 lamp projector, get if it is lighting or not. Acceptable "%1" [CR] Response %1 "00" [CR]=Light is out. "01" [CR]=Light is on. Unacceptable " "[CR] 25/25
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
BASIC SERIAL COMMAND SPECIFICATIONS
PDG-DWL2500
Ver.1.00
SANYO Electric Co., Ltd
DS Company
Projector Division