Sanyo PDG-DXL100 Owner's Manual

Sanyo PDG-DXL100 - XGA DLP Projector Manual

Get Sanyo PDG-DXL100 - XGA DLP Projector PDF manuals and user guides
UPC - 086483074868
View all Sanyo PDG-DXL100 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PDG-DXL100 manual content summary:

  • Sanyo PDG-DXL100 | Owner's Manual - Page 1
    Multimedia Projector MODEL PDG-DXL100 Owner's Manual
  • Sanyo PDG-DXL100 | Owner's Manual - Page 2
    the Projector From Web 32 Configuring the Network Setting 32 Home Page 35 Control Panel Page 36 Network Setting Page 37 Security Setting Page 38 Alert Setting Page 39 Logout Page 40 Appendices Troubleshooting 41 Replacing the lamp 46 Cleaning the Air Filters 48 Specifications 49
  • Sanyo PDG-DXL100 | Owner's Manual - Page 3
    light may hurt your eyes. To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture. Please do not open or disassemble the projector as this may cause electric shock. When replacing the lamp, please allow unit to cool down, and follow all replacement instructions
  • Sanyo PDG-DXL100 | Owner's Manual - Page 4
    cabinet is critical for proper air circulation and cooling of the unit. The dimensions shown here indicate the minimum space required. If the projector is to be built into a compartment or similarly enclosed, these minimum distances must be maintained. SIDE and TOP REAR 1.5' (50 cm) 1.5' (50 cm
  • Sanyo PDG-DXL100 | Owner's Manual - Page 5
    Usage Notice Do: ■ Turn off the product before cleaning. ■ Use a soft cloth moistened with mild detergent to clean the display housing. ■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not: ■ Block the slots and openings on the unit
  • Sanyo PDG-DXL100 | Owner's Manual - Page 6
    Introduction Product Features This product is an XGA single chip 0.55" DLP® projector. Outstanding features include: ■ True XGA, 1024 x 768 addressable pixels ■ Single chip DLP® technology ■ NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/ SECAM (B/D/G/K/K1/L) and SDTV(480i/576i), EDTV(480p/576p), HDTV(720p/
  • Sanyo PDG-DXL100 | Owner's Manual - Page 7
    Remote Control 2 x AAA Batteries Power Cable VGA Cable Cable AC Power Cable (for U.S.A.) AC Power Cable (for Continental Europe) AC Power Cable (for UK) Factory code 42.00105G011 42.00120G011 42.00110G011 VGA Cable 42.00200G005 Documentation:  CD-ROM User's Manual  Quick Reference Guide
  • Sanyo PDG-DXL100 | Owner's Manual - Page 8
    Introduction Product Overview Projector 7 1 4 7 2 3 5 7 4 6 Air Flow 4 7 8 1. Control Panel 2. Remote Sensor 3. Focus Ring 4. Ventilation (outlet) 5. Lens 6. Lens Cap (with String) 7. Ventilation (inlet) 8. Speaker 7 English English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 9
    IN 2 COMPONENT IN 2 AUDIO IN (VARIABLE) AUDIO OUT 8 English 10 1. SERVICE Port 2. HDMI Port 3. S-VIDEO IN Connector 4. VIDEO IN Connector 5.  11. AUDIO OUT Jack 12. KensingtonTM Lock Port 13. Speaker 4 1. TEMP LED 2. LAMP LED 5 3. POWER LED 4. INPUT Button 5. ON/STAND-BY Button 6 6.
  • Sanyo PDG-DXL100 | Owner's Manual - Page 10
    Introduction Remote Control 1 2 3 4 15 5 16 6 17 7 18 8 9 19 10 20 11 21 12 22 13 23 14 24 1 Infrared trans- Sends signals to the projector. mitter 2 Infrared indica- Signals indicator for sending. tor 3 ON/STAND- Refer to the "Power On/Off the Pro- BY jector" section. (
  • Sanyo PDG-DXL100 | Owner's Manual - Page 11
    and HDMI sources. Zoom out the projector display. Adjust the image to compensate for distortion caused by tilting the projector. Select the lamp mode. (refer the "Aspect Ratio" section of the on-screen display menu to select the desired aspect ratio. Zoom in the projector display. Display information
  • Sanyo PDG-DXL100 | Owner's Manual - Page 12
    21 AUTO. ADJ 22 HDMI 23 S-VIDEO 24 VIDEO Increase/decrease speaker volume. For input a password in the "Security settings". Automatically synchronize the projector to the input source. Press "HDMI" to choose HDMI connector. Press "S-VIDEO" to choose S-Video connector. Press "VIDEO" to choose Video
  • Sanyo PDG-DXL100 | Owner's Manual - Page 13
    according to the instructions. ■ If the new battery are installed into the compartment within 3~4 hours, the remote control code will Remote Control Operating Range  Infrared Remote Point the remote control Receiver is provided toward the projector (In- on the top of the pro- frared Remote
  • Sanyo PDG-DXL100 | Owner's Manual - Page 14
    Note  Make sure that the power plug is fully inserted into both the projector AC inlet and the wall outlet.  The AC outlet must be near this equipment and must be easily accessible. 2 3 Audio Output 4 5 6 SERVICE PORT VIDEO IN S-VIDEO IN MONITOR OUT COMPUTER IN 1 COMPONENT IN 1 COMPUTER
  • Sanyo PDG-DXL100 | Owner's Manual - Page 15
    Make sure that the HDTV receiver power plug is fully inserted into both the projector AC inlet and the wall outlet.  The AC outlet must be near can be used to project the incoming Component and RGB Scart signals. SERVICE PORT VIDEO IN S-VIDEO IN MONITOR OUT COMPUTER IN 1 COMPONENT IN
  • Sanyo PDG-DXL100 | Owner's Manual - Page 16
    .  If you connect multiple sources at the same time, use the "INPUT" on the remote control or use "COMPUTER 1", "COMPUTER 2", "S-VIDEO", "VIDEO", "HDMI" on the remote control to switch inputs. Note Turn on the projector first and then the signal sources. 1 Lens Cap 2 Power 15 English English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 17
    -BY" to turn off the projector lamp, you will see a message as below on the on-screen display. 2. Press the "ON/STAND-BY" again to confirm. 3. The cooling fan continues to operate for about 60 seconds for cooling cycle and the POWER LED will flash green. When the light starts flashing orange, the
  • Sanyo PDG-DXL100 | Owner's Manual - Page 18
    see the message below displays on-screen, the projector has detected that the lamp is approaching its end of life. Please change the lamp as soon as possible or contact your local dealer or our service center.  When the "TEMP" LED indicator flashes red and the message below displays on-screen, it
  • Sanyo PDG-DXL100 | Owner's Manual - Page 19
    and lower the image to fill the screen. To raise/lower the image: 1. Use  to fine-tune the display angle. Note You can raise the projector front up to 3 degrees by rotating the adjustable feet. Front Adjustable feet 1 Maximun Length:7mm Rear Adjustable feet 1 Maximun Length:2mm 18 English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 20
    Focus To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 1.62 to 12.46 feet (0.5 to 3.8 meters) with mechanical travel. Focus Ring Adjusting Projection Image Size H : A = 6.78 B ÷ H x 100% = 115%(Offset) H
  • Sanyo PDG-DXL100 | Owner's Manual - Page 21
    On Screen Display that allows you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD, press "MENU" on the Remote Control. 2. When OSD is displayed, use keys to select any item in the main menu. While
  • Sanyo PDG-DXL100 | Owner's Manual - Page 22
    of the image.  Press the to darken image.  Press the to lighten the image. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.  Press the  Press the Total
  • Sanyo PDG-DXL100 | Owner's Manual - Page 23
    the image displayed. Use the or to adjust the value. White Peaking Use the white peaking control to set the white peaking level of DMD chip. 0 stands for minimal peaking, and 10 stands for maximum peaking. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more
  • Sanyo PDG-DXL100 | Owner's Manual - Page 24
    changes the amount of black and white in the image.  Press the  Press the Color to decrease the contrast. to increase the contrast. Adjust a video image from black and white to fully saturated color.  Press the to decrease the amount of color in the image.  Press the to
  • Sanyo PDG-DXL100 | Owner's Manual - Page 25
    to increase the amount of green in the image. to increase the amount of red in the image. Adjust the sharpness of the image.  Press the to Peaking Use the white peaking control to set the white peaking level of DMD chip. 0 stands for minimal peaking, and 10 stands for maximum peaking. If
  • Sanyo PDG-DXL100 | Owner's Manual - Page 26
    image distortion caused by tilting projector. H-position (Horizontal Position)  Press the to move the image left.  Press the to move the image right. V-position (Vertical Position)  Press the to move the image down.  Press the to move the image up. Aspect Ratio Use this function to choose
  • Sanyo PDG-DXL100 | Owner's Manual - Page 27
    can project behind a translucent screen.  Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection.  Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can
  • Sanyo PDG-DXL100 | Owner's Manual - Page 28
    to allow for proper high altitude cooling of the projector. Lamp Life Reminder Choose this function to show or to hide the lamp end of life warning message. ECO Mode Choose "On" to dim the projector lamp which will lower power consumption and extend the lamp life. Choose "Off" to return to normal
  • Sanyo PDG-DXL100 | Owner's Manual - Page 29
    in Stand-by by network during condition. standby mode.  O ff: normal power consumption in Stand-by condition. Remote Control This projector provides two different remote control codes: the factory-set initial code (Code 1) and the secondary code (Code 2). This switching function prevents
  • Sanyo PDG-DXL100 | Owner's Manual - Page 30
    Lamp Counter Reset Reset the lamp life hour after replacing a new lamp. Security Settings  S ecurity Settings: ■ On: Choose "On" to enable security verification when turning on the projector digits in length) using the number but- tons on the remote, then press "ENTER" to confirm. 4. Enter new
  • Sanyo PDG-DXL100 | Owner's Manual - Page 31
    the network connection status. DHCP Display the network connection status.  O n: Assign an IP address to the projector from the DHCP server automatically.  O ff: Assign an IP address manually. IP Address Select an IP address. Subnet Mask Select subnet mask number. Gateway Select the default
  • Sanyo PDG-DXL100 | Owner's Manual - Page 32
    User Controls Language Note In the first instance of powering on the projector, the language menu is displayed to select the default language. All subsequent operations assume the selected default language. Language Choose the multilingual OSD. Press into
  • Sanyo PDG-DXL100 | Owner's Manual - Page 33
    User Controls Controlling the Projector From Web Configuring the Network Setting 1. Fill in a new IP, a subnet mask, a gateway : alert setting. Note 5. Open "Control Panel" to control your projector. When you used the projector IP address, you will can not link to your service server. 32 English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 34
    , the IP address is http: // 192.168.0.100. Step 1: Find an IP Address (192.168.0.250) from LAN function of projector. Step 2: Select apply and press "ENTER" button to submit function or press "MENU" key to exit. Step 3: To open Network Connections, click Start, click Control
  • Sanyo PDG-DXL100 | Owner's Manual - Page 35
    User Controls Step 9: The web page will display as below: Step 10: Open "Control Panel" to control your projector. 34 English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 36
    lamp Access the Projector Web Server by entering the projector's IP address at the web browser. The Home Page displays basic information about the projector. failed. Stop using the projector and disconnect the power cable from the electrical outlet, then contact your local dealer or our service
  • Sanyo PDG-DXL100 | Owner's Manual - Page 37
    becomes invalid. ton and then click "Set" button. Some control items can not be used depending on the selecting input mode or functions of the projector you use. In this case, the values of those items are indi-  Radio button setting: Select an item by selecting a radio button. cated with
  • Sanyo PDG-DXL100 | Owner's Manual - Page 38
    . (Maximum characters: 12). Network Setting Choose DHCP to assign an IP address to the projector from a DHCP server automatically, or Manual to assign an IP address manually.  Network function setting, Refer to the "Network" section on page 30 for more information. Password Setting This
  • Sanyo PDG-DXL100 | Owner's Manual - Page 39
    digit number is valid for the telnet password.  T he default Telnet Password as [0000], which means no password is set.  W hen you connect the projector to the network, it is recommended to set a new password.  If the password has been set on this Security Setting Page, the au- thentication is
  • Sanyo PDG-DXL100 | Owner's Manual - Page 40
    notification when an abnormality or warning occurs.  S ubject: You can enter the subject line of the email. Click the "Email Alert Test" button to test the e-mail alert settings. SMTP Setting SMTP server, User name and Password should be provided by your network administrator or MIS. Alert
  • Sanyo PDG-DXL100 | Owner's Manual - Page 41
    User Controls Logout Page When you use this page, the projector system will go back Login mode. 40 English
  • Sanyo PDG-DXL100 | Owner's Manual - Page 42
    Appendices Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local dealer or service center. Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely
  • Sanyo PDG-DXL100 | Owner's Manual - Page 43
    Display-->Arrangement-->Mirror display  If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. Problem: The screen of the Notebook or PowerBook computer is not displaying a presentation  If you are using a Notebook PC: Some
  • Sanyo PDG-DXL100 | Owner's Manual - Page 44
    required distance 1.62 to 12.46 feet (0.5 to 3.8 meters) from the projector (refer to page 19). Problem: The image is stretched when displaying 16:9 DVD The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting. If the image is
  • Sanyo PDG-DXL100 | Owner's Manual - Page 45
    (Red) Normal (Power on) Powering up (Warming up) Flashing Power off (Cooling-I: It can't accept any key at this status) Power off (Cooling-II: It can accept power key to turn on the projector) Error (Lamp failed) Error (Fan lock) Error (Over temp.) Flashing Flashing * Flashing Note Steady light
  • Sanyo PDG-DXL100 | Owner's Manual - Page 46
    Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.  Replacing the lamp - the lamp is about to reach its maximum life- time. Prepare to replace it soon.  Fan failed -
  • Sanyo PDG-DXL100 | Owner's Manual - Page 47
    personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped. Warning: For continued safety replace with a lamp of the same type. 46 English Lamp Replacing Procedure: 1. Switch off the power to the projector by pressing the "ON/ STAND
  • Sanyo PDG-DXL100 | Owner's Manual - Page 48
    the following information to the dealer. ■ Model No. of your projector : PDG-DXL100 ■ Replacement Lamp Type No. : POA-LMP138 (Service Parts No. 610 346 4633) LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may
  • Sanyo PDG-DXL100 | Owner's Manual - Page 49
    inside the projector. Should the and adversely affect the life of the projector. Clean the air filters following Do the projector. 48 English Air Filters Cleaning Procedure: 1. Turn off the projector, projector. Usage in these environments may cause a poor image quality. ■ When using the projector
  • Sanyo PDG-DXL100 | Owner's Manual - Page 50
    Size (Diag.) Projection Distance Video Compatibility H. Frequency Specifications Single Chip DLP® Technology by Texas Instruments XGA: 1024 pixels(H) X 768 lines(V), up to UXGA (1600 X 1200) with scaling technology 225W (170W on ECO mode) F#2.6 f=6.97mm with manual focus 40 to 307 inches (1.02 to
  • Sanyo PDG-DXL100 | Owner's Manual - Page 51
    (Analog) (1) Signals from D-sub 15 Modes Resolution VGA SVGA XGA SXGA Note Note: "*" compressed computer image. Note Note: The projector only support a separate sync signal. Composite sync and sync on green are not supported. WXGA QuadVGA SXGA+ UXGA Power Mac G4 PowerBook G4 i Mac
  • Sanyo PDG-DXL100 | Owner's Manual - Page 52
    640 x 480 72 SVGA 640 x 480 75 720 x 400 70 800 x 600 56 800 x 600 60 800 x 600 72 800 x 600 75 832 x 624 75 XGA 1024 x 768 60 1024 x 768 70 1024 x 768 75 SXGA *1280 x 1024 60 *1280 x 1024 75 WXGA *1280 x 720 60 *1280 x 800 60 *1440 x 900
  • Sanyo PDG-DXL100 | Owner's Manual - Page 53
    Appendices (2) AV digital signals with HDMI cable Modes Resolution 480i 480p (NTSC) 480p (NTSC) 576i (PAL) 576p (PAL) 720p (NTSC) 720p (PAL) 1080i (NTSC) 1080i (PAL) 1080p (NTSC) 1080p (PAL) 1440 x 480 640 x 480 720 x 480 1440 x 576 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x
  • Sanyo PDG-DXL100 | Owner's Manual - Page 54
    Mini D-sub 15 pin) 54321 10 9 8 7 6 15 14 13 12 11 1 Red (R/Cr) Input/R Output 9 5V / *** 2 Green (G/Y) Input/G Output 10 Ground ( ICP download 4 *** 12 DDC data / *** 5 6 Ground (Horiz.sync.) Ground (Red) 13 Horiz. sync. Input / Output (Composite H/V sync. Input) 7 Ground (Green
  • Sanyo PDG-DXL100 | Owner's Manual - Page 55
    Notices This appendix lists the general notices of your Projector. FCC notice This device has been tested and found to comply with the limits for a energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
  • Sanyo PDG-DXL100 | Owner's Manual - Page 56
    Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, in- cluding interference that may cause undesired
  • Sanyo PDG-DXL100 | Owner's Manual - Page 57
    's operations by using the RS-232C serial port. Operation 1. Connect a RS-232C serial cross cable to SERVICE PORT on the projector and serial port on the PC. 2. Launch a communication software provided with PC and setup the communication condition as follows: 3. Type the command for controlling
  • Sanyo PDG-DXL100 | Owner's Manual - Page 58
    'ACK' 'CR' ■ When the projector cannot decode the command, it returns with format below. '?' 'CR' projector and serial port on the PC. Command C44 C89 C8E C8F Function YPbPr 2 --Scart IMAGE(Toggle) D.zoom + D.zoom Video S-Video YPbPr 1 POINTER RIGHT POINTER LEFT POINITER UP POINITER DOWN ENTER
  • Sanyo PDG-DXL100 | Owner's Manual - Page 59
    your local dealer for further CR6 information of other commands. CR7 Input Mode Read Lamp Time Read Setting Read Temperature Read Lamp Mode Read Projector Return 00 80 20 10 28 21 81 Projector status Power ON Standby mode Cooling Down Power Failure Cooling Down due to Abnormal Temperature
  • Sanyo PDG-DXL100 | Owner's Manual - Page 60
    application The telnet 10000 port is used to control the projector. installed on your computer. Normally, the telnet application is available on your computer. Further instructions about the telnet application, please see the Control on-line guide on your (For example, in case of using the
  • Sanyo PDG-DXL100 | Owner's Manual - Page 61
    1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Computer 1 YPbPr 1 SCART Computer 2 YPbPr 2 Video S-Video HDMI PJLink Input
  • Sanyo PDG-DXL100 | Owner's Manual - Page 62
    Dimensions 12.06"/306.53mm Appendices 4.75"/120.54mm 1.52"/38.70mm Lens Center 2.55"/64.67mm 5.07"/128.92mm 4.74"/120.54mm 0.47"/11.89mm 3° Max. 9.93"/252.30mm 11.51"/292.29mm 2.59"/65.70mm 4.13"/105.00mm 4.70"/119.50mm 4.99"/126.70mm 0.74"/18.80mm 4.06"/103.10mm 4.06"/103.10mm Screw
  • Sanyo PDG-DXL100 | Owner's Manual - Page 63
    KF8A
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
Multimedia Projector
MODEL
PDG-DXL100
Owner's Manual