Sanyo PLC-ET30L Owner's Manual
Sanyo PLC-ET30L - 4200 Lumens Manual
 |
UPC - 086483069925
View all Sanyo PLC-ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-ET30L manual content summary:
- Sanyo PLC-ET30L | Owner's Manual - Page 1
Multimedia Projector MODEL PLC-ET30L *Projection lens is optional. Owner's Manual - Sanyo PLC-ET30L | Owner's Manual - Page 2
the top control or remote control (p.54). PIN code lock functions prevents unauthorized use of the projector (pp.54-56). ◆ Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals (pp.11-12). ◆ Lamp Control Brightness of the - Sanyo PLC-ET30L | Owner's Manual - Page 3
49 Maintenance and Filter Cleaning 58 Cleaning the Filter 58 Resetting the Filter Counter 58 Lamp Replacement 59 Resetting the Lamp Counter 60 Warning Indicators 61 Cleaning the Projection Lens 62 Cleaning the Projector Cabinet 62 Appendix 63 Troubleshooting 63 Menu Tree - Sanyo PLC-ET30L | Owner's Manual - Page 4
of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT - Sanyo PLC-ET30L | Owner's Manual - Page 5
projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting servicing to qualified service personnel. Unplug this projector from wall outlet and refer servicing to qualified service on the projector. NOTE FOR CUSTOMERS IN THE US Hg LAMP(S) inside this - Sanyo PLC-ET30L | Owner's Manual - Page 6
Safety Instructions Air Circulation Openings in the cabinet are provided for ventilation. is changed according to the temperature inside the projector. Air flow Air Intake Vent IMPORTANT! Clean the Filter Regularly!! The projector uses a lamp which generates significant heat. The cooling fans and - Sanyo PLC-ET30L | Owner's Manual - Page 7
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in - Sanyo PLC-ET30L | Owner's Manual - Page 8
courier or any other transport service, consult your dealer. - Do not put the projector in a case before it is cooled enough. Cautions in Handling the Projector Do not hold the lens when lifting or moving the projector. Doing so may cause damage to the lens and the projector. Care must be taken when - Sanyo PLC-ET30L | Owner's Manual - Page 9
instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) : PLC-ET30L Trade Name : Sanyo Responsible party : SANYO from the Parts Department indicated in your User Instructions. If the plug supplied is not suitable - Sanyo PLC-ET30L | Owner's Manual - Page 10
This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brand Corporation. !0 Infrared Remote Receiver (Back) !1 Terminals and Connectors !2 Lamp Cover !3 Power Cord Connector !4 Optional Parts Attachment !5 Air Intake Vent !6 Hand Grip - Sanyo PLC-ET30L | Owner's Manual - Page 11
output signal from video equipment to this jack (p.21). t USB CONNECTOR (Series B) Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.20). o AUDIO 1 JACK Connect the - Sanyo PLC-ET30L | Owner's Manual - Page 12
computer to external video equipment (p.20). !3 CONTROL PORT CONNECTOR When controlling the projector from a computer, connect the computer to this connector with a control cable. !4 Infrared Remote Receiver (Back) The infrared remote receiver is also located in the front (pp.10, 16). ✽ RESET - Sanyo PLC-ET30L | Owner's Manual - Page 13
indicator Lights yellow when the projection lamp reaches its end of life (pp.59, 69). e ON/STAND-BY button Turn the projector on or off (pp.24-25). r INPUT button Select an input source (pp.34-35). t LENS button Enter the focus, zoom, and lens shift adjustment mode (p.30). y POINT ed7 8 (VOLUME - Sanyo PLC-ET30L | Owner's Manual - Page 14
) (p.29). e Signal Emission indicator Lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector (p.32). r Laser Light window A laser beam is emitted from here (p.32). t ON button Turn the - Sanyo PLC-ET30L | Owner's Manual - Page 15
is not in use. Slide this switch to "RESET" to initialize the remote control code or switch the Spotlight and Pointer to the Laser pointer function (p.32 @2 KEYSTONE button Correct keystone distortion (p.31). @3 LENS SHIFT button Select the Lens Shift function (p.30). @4 SCREEN button Select the - Sanyo PLC-ET30L | Owner's Manual - Page 16
battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range 16.4' Point the remote control toward the projector (to Infrared (5 m) Remote Receivers) when pressing the buttons. Maximum operating range for the - Sanyo PLC-ET30L | Owner's Manual - Page 17
or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on page 52. 1 Press and hold the MENU and a number button (1-8) for more than five - Sanyo PLC-ET30L | Owner's Manual - Page 18
Standard Lens.) For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. ✔Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best - Sanyo PLC-ET30L | Owner's Manual - Page 19
Be careful when handling the lens. Do not drop. Lens Release button Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. 3 Slowly turn the lens clockwise until it clicks. Make - Sanyo PLC-ET30L | Owner's Manual - Page 20
) ✔Note: • When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available. • USB cable connection is needed when operating the computer with the remote control. 20 Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables - Sanyo PLC-ET30L | Owner's Manual - Page 21
video cable Audio Input VIDEO AUDIO IN AUDIO IN VIDEO S-VIDEO Audio cable (stereo) ✔Note: • When the AUDIO OUT is plugged-in, the projector's builtin speaker is not available. • The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.35). Unplug - Sanyo PLC-ET30L | Owner's Manual - Page 22
used for connection • Audio Cables (Mini Plug [stereo] x 2) • Scart-VGA Cable • BNC Cable • DVI-Digital Cable (Cables are not supplied with the projector.) Audio Output Component Video Output (Y, Cb/Pb, Cr/Pr) RGB Scart 21-pin Output Digital Output (HDCP compatible) Audio cable (stereo) BNC - Sanyo PLC-ET30L | Owner's Manual - Page 23
system. If you are not sure of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this equipment and must be easily accessible. ✔Note: •Unplug - Sanyo PLC-ET30L | Owner's Manual - Page 24
lamp control status icon (see page 49) appear on the screen. If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed you start to operate the projector. When using remote control Press the Number buttons on the remote control to enter a - Sanyo PLC-ET30L | Owner's Manual - Page 25
screen. 2 Press the ON/STAND-BY button or the STAND-BY button on the remote control again to turn off the projector. The LAMP indicator turns off and the POWER indicator starts to blink green. After the projector is turned off, the cooling fans operates for 90 seconds. During the POWER indicator is - Sanyo PLC-ET30L | Owner's Manual - Page 26
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use - Sanyo PLC-ET30L | Owner's Manual - Page 27
signals. Basic Operation Guide Window Show the projector's operating configurations (pp.49- 57). - Language - Logo - Background - Lamp control - Pointer - Remote Control - RC sensor - Display - Power management - On start - Fan control - Security - Test pattern - Warning log - Lamp counter - Filter - Sanyo PLC-ET30L | Owner's Manual - Page 28
up to 15 percent from the central axis of the lens shift. ✔Note: • The arrow disappears at the maximum lens shift in each direction. Zoom Adjustment Display "Zoom" on of the projector and the signal being projected through the projector. Press the INFO. button on the top control or remote control to - Sanyo PLC-ET30L | Owner's Manual - Page 29
is turned off, "On" is displayed. Press the Point 7 8 buttons again to turn the sound back on. Basic Operation Top Control VOLUME +/- buttons Remote Control VOL - button VOL + button MUTE button Volume Dialog Box Approximate level of the volume. Press the MUTE button to set the Mute function - Sanyo PLC-ET30L | Owner's Manual - Page 30
the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 46-48 for details. LENS SHIFT button See page 28 for details. Remote Control AUTO PC button D.ZOOM button ZOOM buttons FOCUS buttons FREEZE button INFO. button POINT ed buttons SCREEN button - Sanyo PLC-ET30L | Owner's Manual - Page 31
normal, press the NO SHOW button again or press any other button. "No show" disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control. The P-Timer display "00:00" appears on the screen and the countdown starts (00:00-59:59). To stop the countdown, press the P-TIMER - Sanyo PLC-ET30L | Owner's Manual - Page 32
to activate the Pointer function. (The Laser pointer has switched to the Pointer function.) 2 Press the LASER button on the remote control pointing toward the projector. The Spotlight or Pointer is displayed on the screen with the LASER button lighting green. Then move the Spotlight or Pointer - Sanyo PLC-ET30L | Owner's Manual - Page 33
Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. 1 Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable (p. 20). When the Pointer function is used, the wireless mouse is not available. 2 When a USB - Sanyo PLC-ET30L | Owner's Manual - Page 34
Control Operation Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. The input source appears on the screen as you press each button. Select the connected input source. RGB (Scart) RGB (PC digital) RGB (AV - Sanyo PLC-ET30L | Owner's Manual - Page 35
the RGB PC signal is connected. Video When the RGB video signal is connected. Component* When the component signal is connected. * If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection" on page 36). INPUT 3 Auto When selecting Auto, the - Sanyo PLC-ET30L | Owner's Manual - Page 36
system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL - Sanyo PLC-ET30L | Owner's Manual - Page 37
(pp.40-41). ----- There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 63.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1-10 (pp.39-40). SVGA - Sanyo PLC-ET30L | Owner's Manual - Page 38
pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can is not provided properly with this operation, manual adjustments are required (pp.39-40). • - Sanyo PLC-ET30L | Owner's Manual - Page 39
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo PLC-ET30L | Owner's Manual - Page 40
Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo PLC-ET30L | Owner's Manual - Page 41
Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. (This icon is displayed with video signal.) Image 1-4 For viewing with the user preset image level in the Image Adjust Menu (see page 44). 41 - Sanyo PLC-ET30L | Owner's Manual - Page 42
Image Adjustment Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display - Sanyo PLC-ET30L | Owner's Manual - Page 43
Disabled. L1........... For an active picture. L2........... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Image Adjustment ✔Note: • Progressive cannot be selected when 480p, 575p, or 720p is - Sanyo PLC-ET30L | Owner's Manual - Page 44
Image Adjustment Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons - Sanyo PLC-ET30L | Owner's Manual - Page 45
this function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Sanyo PLC-ET30L | Owner's Manual - Page 46
original image size is larger than the screen size (1400 x 1050), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to Provide the full screen image. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the - Sanyo PLC-ET30L | Owner's Manual - Page 47
size with the D.ZOOM buttons on the remote control. Screen Adjustment ✔Note: • The projector cannot display any resolution higher than 1600 x 1200. If your computer's screen resolution is higher than that, lower the resolution before connecting to the projector. • The image data other than 1400 - Sanyo PLC-ET30L | Owner's Manual - Page 48
the desired function and press the SELECT button. Wide Provide the image at the 16:9 wide screen ratio. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen for a few seconds and then the Aspect - Sanyo PLC-ET30L | Owner's Manual - Page 49
: • When no captured image is set, the "User" options is not available. Lamp control This function allows you to change brightness of the Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long - Sanyo PLC-ET30L | Owner's Manual - Page 50
on the starting-up display from among following options. User.......... Show the image you captured Default...... Show the factory data is automatically reset and the projector captures an image without keystone correction. • When capturing an image, the resolution may lower depending on the input - Sanyo PLC-ET30L | Owner's Manual - Page 51
is set to "4321" at the factory. Enter a Logo PIN code Use the Point ed buttons on the top control or Number buttons on the remote control to enter a number. When using top control Use the Point ed buttons on the top control to select a number. Press the Point 8 button to - Sanyo PLC-ET30L | Owner's Manual - Page 52
the lamp is not bright enough. Off Hide the On-Screen Displays except; ●On-Screen Menu ●"Power off?" (p.25) ●"No signal" for Power management (p.53) ●"Please wait ..." ●Arrows for panning mode (p.46) ●"Filter warning" icon (red) (p.69) Remote control Display - Sanyo PLC-ET30L | Owner's Manual - Page 53
is reconnected or any button on the top control or remote control is pressed. Shut down.......... When the lamp has been fully cooled down, the power will be On start When this function is set to "On," the projector will be automatically turned on just by connecting the AC power cord to a wall - Sanyo PLC-ET30L | Owner's Manual - Page 54
remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service the projector in upwardly inclined +160º position, install the projector bottom side up. -160º UP UP UP UP ✔Note: • Make sure to use the clean filter when - Sanyo PLC-ET30L | Owner's Manual - Page 55
Use the Point ed buttons on the top control or Number buttons on the remote control to enter a number. When using top control Use the Point ed buttons Press the SELECT button to close the dialog box. PIN code lock When the projector is locked with a PIN code, the PIN code lock symbol appears on the - Sanyo PLC-ET30L | Owner's Manual - Page 56
Test pattern Various test pattern are available for use when setting up the projector lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the projection lamp, reset the lamp - Sanyo PLC-ET30L | Owner's Manual - Page 57
environment. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Quit Exit the Setting Menu. Filter warning icon (yellow) appears on the screen at a set time. ✔Note - Sanyo PLC-ET30L | Owner's Manual - Page 58
by using a brush or blower. WARNING: Do not wash the filter with water and any other liquid matter. Otherwise the filter may be damaged. 5 Reinstall the filter into the projector properly. Filter cover Filter Filter Filter cover 6 Reset the filter counter in the Setting Menu. See "Resetting the - Sanyo PLC-ET30L | Owner's Manual - Page 59
" on the next page. Screw Handle Screws ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : PLC-ET30L ● Replacement Lamp Type No. : POA-LMP116 (Service Parts No. 610 335 8093) 59 - Sanyo PLC-ET30L | Owner's Manual - Page 60
a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion. ● A Lamp may explode as a result of vibration - Sanyo PLC-ET30L | Owner's Manual - Page 61
projector are not blocked. - Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Clean the filter and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC - Sanyo PLC-ET30L | Owner's Manual - Page 62
, solvents, or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, replace the lens cap. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily - Sanyo PLC-ET30L | Owner's Manual - Page 63
NO SHOW button or any other button on the remote control. Image is out of focus. - Adjust focus of the projector. See pages 28, 30. - Provide proper distance between the projector and projection screen See page 18. - Check the projection lens to see if it needs cleaning. See page - Sanyo PLC-ET30L | Owner's Manual - Page 64
LAMP REPLACE indicator. If it lights, the end of lamp life is approaching. Replace the lamp with a new one promptly. See pages 59-60, 69. - Check the Lamp is distorted. - With maximum lens shift, image distortion may be OUT is plugged in, the projector's built-in speaker is not - Sanyo PLC-ET30L | Owner's Manual - Page 65
are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the problem. We will advise you how - Sanyo PLC-ET30L | Owner's Manual - Page 66
PAL-N Sound Volume Mute Quit 0-63 On/Off Information Input H-sync freq. V-sync freq. Screen Language Lamp status Power management Security Key lock PIN code lock Remote control code Image Dynamic Standard Real ] Cinema v Image 1 Image 2 Image 3 Image 4 Image Adjust ] For Computer - Sanyo PLC-ET30L | Owner's Manual - Page 67
/Off Security Key lock Off Projector (all) Projector (part) Remote control (all) Remote control (part) PIN code lock Off/On 1/On 2 PIN code change Test pattern Quit 8 test patterns provided Quit Warning log Lamp counter Hour(s) Reset Yes/No Quit Filter counter Hour(s) Off/100H/200H - Sanyo PLC-ET30L | Owner's Manual - Page 68
. Press the ON/STAND-BY button to turn on the projector. The projector is operating normally. POWER, LAMP, WARNING TEMP., WARNING FILTER, and LAMP REPLACE indicators are blinking all together. The projector is in the Power management mode. The projector is preparing for stand-by or the projection - Sanyo PLC-ET30L | Owner's Manual - Page 69
indicator Indicators POWER green LAMP red WARNING FILTER orange Projector Condition Filter warning red icon The filter is clogged. Stop using the projector immediately and clean or replace the filter (see below). - - Filter warning yellow icon The Filter counter reached a set time. Clean - Sanyo PLC-ET30L | Owner's Manual - Page 70
Appendix Compatible Computer Specifications Basically this projector can accept the signal from XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 MAC 19 SXGA 1 SXGA 2 RESOLUTION 640x480 720x400 640x400 640x480 640x480 640x480 640x480 640x480 640x480 640x480 768x575 768x576 640x480 800x600 800x600 800x600 - Sanyo PLC-ET30L | Owner's Manual - Page 71
digital)] is selected in the Input Menu. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 RESOLUTION 640x480 720x480 768x575 800x600 1024x768 1366x768 1360x768 1376x768 1360x768 1366x768 1280x768 H-Freq. (kHz) 31.470 31.470 31.250 37.879 43 - Sanyo PLC-ET30L | Owner's Manual - Page 72
Resolution LCD Panel System Panel Resolution Number of Pixels Signal Compatibility Color System High Definition TV Signal Scanning Frequency Multi-media Projector Projection Lamp Interface 1 Audio (Mini Type stereo) x 1 Mini Type (Wired Remote) x 1 Mini DIN 8 pin x 1 USB Series B - Sanyo PLC-ET30L | Owner's Manual - Page 73
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Control Cable Lens Mount Cover PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. - Sanyo PLC-ET30L | Owner's Manual - Page 74
Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Input 1 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV - Sanyo PLC-ET30L | Owner's Manual - Page 75
Appendix Configurations of Terminals INPUT 1/ANALOG OUT Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 Input 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) 9 +5V Power 10 Ground (Vert.sync.) - Sanyo PLC-ET30L | Owner's Manual - Page 76
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo PLC-ET30L | Owner's Manual - Page 77
Dimensions Unit: inch (mm) 13.7 (348.1) 3.40 (86.4) 6.46 (164) Appendix 5º MAX 1.65 (41.9) 21.09 (535.7) 17.48 (444) 10.85 (275.5) 11.10 (282) 7.87 (200) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 77 - Sanyo PLC-ET30L | Owner's Manual - Page 78
KF7AL-A SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
 |
 |
Multimedia Projector
MODEL
PLC-ET30L
Owner’s Manual
*Projection lens is optional.