Sanyo PLC-WXU30 Owners Manual
Sanyo PLC-WXU30 - WXGA LCD Projector Manual
 |
UPC - 086483069505
View all Sanyo PLC-WXU30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-WXU30 manual content summary:
- Sanyo PLC-WXU30 | Owners Manual - Page 1
Multimedia Projector MODEL PLC-WXU30 Network Supported ❏ Wireless LAN IEEE802.11b/g ❏ Wired LAN 100-Base-TX/10-Base-T Memory Viewer ❏ SD Card Memory Viewer ✽Refer to the owner's manuals below for details about network and memory viewer function. ■ Network Set-up and Operation ■Memory - Sanyo PLC-WXU30 | Owners Manual - Page 2
- Sanyo PLC-WXU30 | Owners Manual - Page 3
top control or remote control (p.54). PIN code lock functions prevents unauthorized use of the projector (pp.22, 54-55). ◆ Helpful Maintenance Functions Lamp and filter maintenance functions provide for better and proper maintenance of the projector. ◆ LAN Network Function This projector is loaded - Sanyo PLC-WXU30 | Owners Manual - Page 4
67 Troubleshooting 67 Menu Tree 71 Indicators and Projector Condition 73 Compatible Computer Specifications 74 Technical Specifications 76 Optional Parts 77 PJ Link Notice 78 Configurations of Terminals 79 PIN Code Number Memo 80 Lamp Replacement Label 80 Dimensions 81 - Sanyo PLC-WXU30 | Owners Manual - Page 5
problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Sanyo PLC-WXU30 | Owners Manual - Page 6
the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts - Sanyo PLC-WXU30 | Owners Manual - Page 7
heat. Cooling fans are provided to cool down the projector. The fans' running speed is changed according to the temperature inside the projector. Air Intake Vent Safety Instructions Moving the Projector When moving the projector, replace the lens cover and retract adjustable feet to prevent damage - Sanyo PLC-WXU30 | Owners Manual - Page 8
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward, or backward, perpendicular to the - Sanyo PLC-WXU30 | Owners Manual - Page 9
of Part 15 of FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : PLC-WXU30 Trade Name : Sanyo Responsible - Sanyo PLC-WXU30 | Owners Manual - Page 10
Indicator and !6 LAN Connection Terminal are for the Network function. Refer to the owner's manual "Network Set-up and Operation". ✽ Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. * Kensington is a registered trademark of ACCO Brands Corporation - Sanyo PLC-WXU30 | Owners Manual - Page 11
19). u LAN Connection Terminal Connect the LAN cable (refer to the owner's manual "Network Set-up and Operation"). i ALARM buttons Use these buttons when setting up the Alarm function (pp.58-59). o VIDEO IN Connect the composite video output signal to this jack (p.20). !0 AUDIO IN Connect the audio - Sanyo PLC-WXU30 | Owners Manual - Page 12
Part Names and Functions Top Control q w i e o r !0 t !1 y u q ALARM indicator Blinks red when informing the setting or battery status (pp.58-59). w LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.65, 71). e ON/STAND-BY button Turn the projector - Sanyo PLC-WXU30 | Owners Manual - Page 13
projector or a pointer for wireless mouse operation. (pp.14-15) @5 AUTO SET/CANCEL button - Correct vertical keystone distortion and adjust the PC display parameters. (pp.26, 47) - Display the image in SD card or return to the menu bar in Memory Viewer menu. Refer to the owner's manual of "Network - Sanyo PLC-WXU30 | Owners Manual - Page 14
control. Signal Emission Indicator Laser Light Window Pointer Function You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. 1 Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function - Sanyo PLC-WXU30 | Owners Manual - Page 15
control codes prevents interference from other remote controls when several projectors or video equipment next to each other are operated at the same time. Change the remote control code for the projector first before changing that for the remote control. See "Remote control" in the Setting Menu on - Sanyo PLC-WXU30 | Owners Manual - Page 16
batteries. ● Risk of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for - Sanyo PLC-WXU30 | Owners Manual - Page 17
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. ✔Notes: • The brightness in the room has a great influence on picture quality. It is recommended - Sanyo PLC-WXU30 | Owners Manual - Page 18
of the type of power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. Connect the AC power cord (supplied) to the projector. The AC outlet must be near this equipment and must be easily accessible - Sanyo PLC-WXU30 | Owners Manual - Page 19
terminal as input. • When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available. • USB cable connection is needed when operating the computer with the remote control or using the PAGE ed buttons on the remote control. AUDIO OUT SD (stereo) Unplug the power cords of both - Sanyo PLC-WXU30 | Owners Manual - Page 20
Cable • Audio Cable (Cables are not supplied with the projector. ) Composite Video and Audio Output (R) (L) (Video) S-video Output Video and audio cable S-video cable External Audio Equipment Audio Input AUDIO IN VIDEO S-VIDEO Audio cable (stereo) KB3AC SD AUDIO OUT (stereo) ✔Notes - Sanyo PLC-WXU30 | Owners Manual - Page 21
for connection • Audio Cables • Scart-VGA Cable • Component Cable • Component-VGA Cable (Cabels are not supplied with this projector.) Installation RGB Scart 21pin Output Component Video Output (Y, Pb/Cb, Pr/Cr) Audio Output Component cable Scart-VGA cable Component-VGA cable Audio cable - Sanyo PLC-WXU30 | Owners Manual - Page 22
manual and keep it at hand. Should the PIN code be missing or forgotten, consult your dealer or service Lamp Control Lamp control status (See page 51 for Lamp control status.) ✔Note: • The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector - Sanyo PLC-WXU30 | Owners Manual - Page 23
the remote control, and "Power off?" appears on the screen. 2 Press the POWER ON/STAND-BY button again to turn off the projector. The OFF. DO NOT OPERATE THE PROJECTOR CONTINUOUSLY WITHOUT REST. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET STAND FOR ABOUT AN - Sanyo PLC-WXU30 | Owners Manual - Page 24
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use - Sanyo PLC-WXU30 | Owners Manual - Page 25
(pp.37-38). Sound Menu Used to adjust the volume or mute the sound (p.27). Wired Menu See owner's manual "Network Set-up and Operation". For video source Input Menu Used to select an input source either Video or Computer (pp.40, 41). Image Select Menu Used to select an image mode among Dynamic - Sanyo PLC-WXU30 | Owners Manual - Page 26
is provided to automatically correct Keystone distortion according to the projector's tilt and adjust the computer display parameters (Fine sync, SETUP/CANCEL or AUTO SET/CANCEL button, adjust manually by pressing the KEYSTONE button on the remote control or selecting Keystone in the Setting menu - Sanyo PLC-WXU30 | Owners Manual - Page 27
back on, press the MUTE button again or press the VOLUME +/- buttons. The Mute function is also effective for the AUDIO OUT jack. Top Control Remote Control VOLUME+/buttons VOL- button VOL+ button Menu Operation 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to - Sanyo PLC-WXU30 | Owners Manual - Page 28
VIDEO/NETWORK button Press the COMPUTER, VIDEO, or NETWORK button on the remote control to select the input source. See pages 3031, 40-41 for details. Refer to the owner's manual "Network Eco Lower brightness reduces the lamp power consumption and extends the lamp life. ✔Note: • See the next - Sanyo PLC-WXU30 | Owners Manual - Page 29
NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo selection (see page 49), the screen changes each time - Sanyo PLC-WXU30 | Owners Manual - Page 30
1 (Analog) Computer 1 (Digital) Computer 2 Video Wired Remote Control Wireless COMPUTER button Computer 1 (Analog) Computer Menu Input Menu icon ✔Notes: • Wired and Wireless are for the Network function. See owner's manual "Network Set-up and Operation" . • When the Input Search function is - Sanyo PLC-WXU30 | Owners Manual - Page 31
Computer 1 (Analog) Computer 1 (Digital) Computer 2 Video Wired Remote Control Wireless COMPUTER button Menu Operation 1 Press the MENU button this projector may not display the digital content protected by HDCP. • Wired and Wireless are for the Network function. See owner's manual "Network Set - Sanyo PLC-WXU30 | Owners Manual - Page 32
WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector Check the connection between your computer and the projector. (See "Troubleshooting" on page 67.) The preset system is manually adjusted in the PC Adjust Menu. The - Sanyo PLC-WXU30 | Owners Manual - Page 33
pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can is not provided properly with this operation, manual adjustments are required (pp.34-35). • - Sanyo PLC-WXU30 | Owners Manual - Page 34
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has five independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo PLC-WXU30 | Owners Manual - Page 35
Input Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo PLC-WXU30 | Owners Manual - Page 36
remote control. Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector colored board. Image 1-4 For viewing with the user preset image mode in the Image Adjust Menu ( provided in each computer, component, and video input source. Menu Operation 1 Press the - Sanyo PLC-WXU30 | Owners Manual - Page 37
Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the adjustment - Sanyo PLC-WXU30 | Owners Manual - Page 38
the screen size. True Provide the image in its original size. When the original image size is larger than the screen size (1280 x 800), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to - Sanyo PLC-WXU30 | Owners Manual - Page 39
Input Custom Adjust the screen scale and position manually with this function. Press the SELECT button at image size. The projected image can be also compressed by pressing the D.ZOOM d button on the remote control. To exit the Digital zoom +/- mode, press any button except the D.ZOOM ed buttons, - Sanyo PLC-WXU30 | Owners Manual - Page 40
jack, select S-video. ✔Notes: • Wired and Wireless are for the Network function. See the owner's manual "Network Set-up and Operation" . • When the Input Search function is set to "On1" or "On2", the input signal will be searched automatically (p.51). Top Control Remote Control INPUT button - Sanyo PLC-WXU30 | Owners Manual - Page 41
Scart) and then press the SELECT button. Remote Control Wireless COMPUTER button Computer 1 (Analog video equipment connected to the COMPUTER IN 2/COMPONENT IN terminal with a ScartVGA Cable, select RGB (Scart). ✔Note: • Wired and Wireless are for the Network function. See owner's manual "Network - Sanyo PLC-WXU30 | Owners Manual - Page 42
to the desired system and then press the SELECT button. Video or S-Video Auto The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the - Sanyo PLC-WXU30 | Owners Manual - Page 43
on the projector. Cinema Picture mode adjusted with fine tone. Blackboard(Green) For the image projected on a blackboard. See above for further description. Image1-4 For viewing with the user preset image mode in the Image Adjust Menu (see pages 44-45). Video Input Remote Control IMAGE button - Sanyo PLC-WXU30 | Owners Manual - Page 44
Video Input Image Adjustment 1 Press the MENU button to display the On-Screen Green, or Blue is adjusted, the Color temp. level will change to "Adj.". • Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.42). Image Adjust Menu Image Adjust Menu icon Move the red frame - Sanyo PLC-WXU30 | Owners Manual - Page 45
Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To 42). • Reset and Store icons will be displayed when any adjustment is made. Video Input Store icon Image Mode Menu Move the red frame pointer to an image item - Sanyo PLC-WXU30 | Owners Manual - Page 46
Video Input Screen Size Adjustment This projector has the picture screen resize function, which or 1080i is selected in the AV System Menu (p42). Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the "Custom" is displayed on the screen - Sanyo PLC-WXU30 | Owners Manual - Page 47
Auto PC Adjustment. Auto Keystone Auto. . . . . . Always works and corrects keystone distortion according to the projector's tilt. Manual . . . Works only when pressing the AUTO SET/ CANCEL button on the remote control or the AUTO SETUP/CANCEL button on the top control. Off Disables Auto Keystone - Sanyo PLC-WXU30 | Owners Manual - Page 48
. Countdown Off......... Show the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the On-Screen Displays except; ●On-Screen Menu ●"Power - Sanyo PLC-WXU30 | Owners Manual - Page 49
function and set it to "User". Then the captured image will be displayed the next time you turn on the projector or when you press the NO from a computer can be captured up to XGA (1024 x 768). A signal from video equipment can be captured except for 720p, 1035i, and 1080i. • When capturing the - Sanyo PLC-WXU30 | Owners Manual - Page 50
-digit number. After entering the four-digit number, move the pointer to "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, "Logo PIN code" and the number will turn red for a moment. Enter the correct Logo PIN code - Sanyo PLC-WXU30 | Owners Manual - Page 51
project the image from a ceiling-mounted projector. Ceiling Rear When this function is VIDEO button on the remote control. On2........ Input search works under the following situation. - When turning on the projector or "On2," the status of Input and Lamp are displayed every time the signal is - Sanyo PLC-WXU30 | Owners Manual - Page 52
to the owner's manual "Network Set-up and Operation". ✔Note: • When selecting Normal, the cooling fans may be running depending on the temperature inside the projector even if the projector is turned off. Power management For reducing power consumption as well as maintaining the lamp life, the - Sanyo PLC-WXU30 | Owners Manual - Page 53
Eco Lower brightness reduces the lamp power consumption and extends the lamp life. Pointer You can emphasize a part of the projected image the IMAGE button the number of times corresponding to the remote control code for the projector. See "Remote Control Code" on page 15. Pointer Use the Point - Sanyo PLC-WXU30 | Owners Manual - Page 54
top control. If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Select Key lock. Use the Point ed buttons to choose one of the - Sanyo PLC-WXU30 | Owners Manual - Page 55
Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, "PIN code" and the the projector can no longer be started. Change the PIN code Alarm This function allows you to configure the Alarm operation. See "How to Use the Antitheft Alarm - Sanyo PLC-WXU30 | Owners Manual - Page 56
takes more time to cool the projector down. Fan control Choose the lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement icon (Fig.1) will appear on the screen, indicating that the end of lamp life is approaching. When the lamp life is left 0 hour, the Lamp replacement - Sanyo PLC-WXU30 | Owners Manual - Page 57
at a set time. ✔Note: • This icon also appears at turning on.. Fig.4 Filter warning icon Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Quit Exit the Setting Menu - Sanyo PLC-WXU30 | Owners Manual - Page 58
, you must turn on the power once. ✔Notes: • This function is not a guarantee against stealing. • The alarm does not ring while the AC power cord is connected to an outlet even if the projector detects vibrations. • The alarm will stop, as the AC power cord is connected to an outlet, except when the - Sanyo PLC-WXU30 | Owners Manual - Page 59
Point 7 8 buttons to set the selected option. ✔Notes: • The Alarm icon appears dimmed and can be unavailable when the Antitheft alarm function is set to "On" or if the battery is not installed, discharged, or coming to the end of its life. • When the "Security" is selected in the Setting menu, the - Sanyo PLC-WXU30 | Owners Manual - Page 60
" when not using the Alarm function. This can save the power and battery life. Replace the rechargeable batteries Use only the specified battery for this projector. Using other types of battery may cause accident or fire hazard. Replacement Battery: SANYO Ni-MH BATTERY PACK Part No. 645 089 - Sanyo PLC-WXU30 | Owners Manual - Page 61
charge cycles and eventually need to be replaced. If it can no longer be recharged, stop charging immediately and replace it with new one. ● Recharge the battery life. ● If you do not use the projector or the Antitheft alarm function for a long period of time, remove the battery from the projector - Sanyo PLC-WXU30 | Owners Manual - Page 62
projector away from the duct or vent. - Is the filter clean? Clean the filter periodically. The projector is shut down and the WARNING indicator lights red. When the projector AC power cord and contact the service station. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER - Sanyo PLC-WXU30 | Owners Manual - Page 63
, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Filter Pull up and remove. ✔Note: • When reinserting this filter, be sure that the slit part - Sanyo PLC-WXU30 | Owners Manual - Page 64
or while not using it over an extended period of time, replace the lens cover. Attach the lens cover according to the following procedures. 1 Pass the string through a hole of the lens cover. 2 Turn over the projector and remove the screw with a screwdriver. 3 Attach the string with lens cover - Sanyo PLC-WXU30 | Owners Manual - Page 65
Handle Screw Screw Lamp ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector ● Replacement Lamp Type No. : PLC-WXU30 : POA-LMP111 (Service Parts No. 610 - Sanyo PLC-WXU30 | Owners Manual - Page 66
lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo PLC-WXU30 | Owners Manual - Page 67
other than Input mode or - That is the Lamp replacement icon or the Filter warning icon. See Lamp mode icon appears page 56 or 57. Image is out of focus. - Adjust focus of the projector. See page 26. - Provide proper distance between the projector and the projection screen. See page 17 - Sanyo PLC-WXU30 | Owners Manual - Page 68
monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds to display an image after turning on the projector. See page 22. - Check the Input singal, color system, video system or computer system mode - Sanyo PLC-WXU30 | Owners Manual - Page 69
sure the code of the remote control is conformed to the projector's code. See page 53. - Unlock the Key lock function for the remote control function. See page 54. - Check RESET/ON/ALL-OFF switch on the remote control is set to "ON". See page 15. Alarm does not stop ringing - Sanyo PLC-WXU30 | Owners Manual - Page 70
. Try to set the Alarm setting again. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model - Sanyo PLC-WXU30 | Owners Manual - Page 71
RGB Component RGB (Scart) Quit Auto Video S-video Quit 0-63 On/Off Go to System (1) N/A N/A Go to System (1) Go to System (2) N/A Go to System (3) Go to System (3) Go to System (3) See owner's manual "Network Set-up and Operation" See owner's manual "Network Set-up and Operation" N/A........ not - Sanyo PLC-WXU30 | Owners Manual - Page 72
Ready Shut down Timer (1-30 Min.) Quit On start On/Off Lamp control Pointer Remote control Security Normal/Auto/Eco Spotlight/Pointer Quit Code 1-Code 8 Key lock Off Projector Remote control Quit PIN code lock Off/On1/On2 PIN code change Fan Alarm Quit L1/L2 Quit Off Battery charge - Sanyo PLC-WXU30 | Owners Manual - Page 73
or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green. • • • red • • • off • • • blinks green. • • • blinks red. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow - Sanyo PLC-WXU30 | Owners Manual - Page 74
Compatible Computer Specifications Basically this projector can accept the signal from 16 SXGA 17 SXGA 18 SXGA 19 SXGA 20 SXGA+ 1 SXGA+ 2 SXGA+ 3 MAC21 MAC MAC WXGA 1 WXGA 2 WXGA 3 WXGA 4 WXGA 6 WXGA 7 WXGA 8 WXGA 9 UXGA 1 UXGA 2 UXGA 3 UXGA 4 720p 720p 1035i 1080i 1080i RESOLUTION 1152 x 864 1280 - Sanyo PLC-WXU30 | Owners Manual - Page 75
input signal is digital from DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 9 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 - Sanyo PLC-WXU30 | Owners Manual - Page 76
Appendix Technical Specifications Mechanical Information Projector Type Dimensions (W x H x D) Net Weight Feet Adjustment Multi-media Projector 334 mm x 78 mm x 257.5mm (Not including adjustable feet) 3.7 kg 0˚ to 8.9˚ Panel Resolution LCD Panel System Panel Resolution Number of Pixels 0.74" - Sanyo PLC-WXU30 | Owners Manual - Page 77
Owner's Manual Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable Lens Cover with String PIN Code Label Lamp Replacement Label Alarm Label Network Application (CD-ROM Soft Carrying Case ● The specifications are subject to change without notice. ● LCD - Sanyo PLC-WXU30 | Owners Manual - Page 78
Link password, see page 49 on the owner's manual "Network Set-up and Operation." Projector Input Computer1 (Analog) Computer1 (Digital) RGB (PC digital) RGB (AV HDCP) RGB Computer2 Component RGB (Scart) Auto Video Video S-video Wired Wireless Memory viewer PJLink Input RGB 1 DIGITAL - Sanyo PLC-WXU30 | Owners Manual - Page 79
- USB CONNECTOR (Series B) 1 Vcc 21 2 - Data 3 + Data 34 4 Ground LAN TERMINAL 1 TX + 5 ----- 2 TX - 6 RX - 3 RX + 7 ----- 4 ----- 8 ----- 87654321 SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 1 RXD 2 ----3 ----4 GND 5 RTS/CTS 6 TXD 7 GND 8 GND 79 - Sanyo PLC-WXU30 | Owners Manual - Page 80
place of the projector's body while the Antitheft alarm function is set. Lamp Replacement Label When using the projector ceiling-mounted, put the Lamp replacement label (supplied) on in a prominent place of the projector's body to check the Replacement Lamp Type Number. 80 Lamp Replacement Label - Sanyo PLC-WXU30 | Owners Manual - Page 81
Dimensions Appendix Unit: inch(mm) Screw Holes for Ceiling Mount Screw: M4 Depth: 0.472(12.0) ! ! 81 - Sanyo PLC-WXU30 | Owners Manual - Page 82
KB3AC SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
 |
 |
Multimedia Projector
MODEL
PLC-WXU30
Owner’s Manual
Network Supported
❏
Wireless LAN
IEEE802.11b/g
❏
Wired LAN
100-Base-TX/10-Base-T
Memory Viewer
❏
SD Card Memory Viewer
✽
Refer to the owner’s manuals below for details
about network and memory viewer function.
■
Network Set-up and Operation
■
Memory viewer