Sanyo PLC-XP45 Owners Manual

Sanyo PLC-XP45 - XGA LCD Projector Manual

Get Sanyo PLC-XP45 - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC-XP45 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC-XP45 manual content summary:

  • Sanyo PLC-XP45 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XP45 Owner's Manual
  • Sanyo PLC-XP45 | Owners Manual - Page 2
    projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE
  • Sanyo PLC-XP45 | Owners Manual - Page 3
    the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts
  • Sanyo PLC-XP45 | Owners Manual - Page 4
    the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number Trade Name Responsible party Address Telephone No. : PLC-XP45 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street
  • Sanyo PLC-XP45 | Owners Manual - Page 5
    23 NAME OF EACH PART OF PROJECTOR 7 MANUAL PC ADJUSTMENT 24 SETTING-UP PROJECTOR 8 COMPATIBLE COMPUTER SPECIFICATIONS PROJECTOR 19 CLEANING PROJECTION LENS 38 ADJUSTING SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT 20 20 20 LAMP REPLACEMENT LAMP REPLACE COUNTER TROUBLESHOOTING 39 39 40 LENS
  • Sanyo PLC-XP45 | Owners Manual - Page 6
    FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. x Compact Design This
  • Sanyo PLC-XP45 | Owners Manual - Page 7
    PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET TOP CONTROLS AND INDICATORS PROJECTION LENS AIR INTAKE VENT LENS COVER SPEAKERS INFRARED REMOTE RECEIVER BACK OF CABINET EXHAUST VENT POWER CORD CONNECTOR INFRARED REMOTE RECEIVER HOT AIR EXHAUSTED ! Air blown from exhaust vent is
  • Sanyo PLC-XP45 | Owners Manual - Page 8
    plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug AC
  • Sanyo PLC-XP45 | Owners Manual - Page 9
    designed to project on a flat projection surface. q Projector can be focused from 4.6' (1.4m) ~ 48.3' .2' (9.2m) 36.1' (11.0m) 48.3' (14.7m) LENS SHIFT ADJUSTMENT Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to provide projected image
  • Sanyo PLC-XP45 | Owners Manual - Page 10
    using Menu Operation. (Refer to P 20 and 35.) ADJUSTABLE FEET MOVING PROJECTOR Use Carry Handle when moving a Projector. When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet. When this projector is not in use for an extended period, put it into case
  • Sanyo PLC-XP45 | Owners Manual - Page 11
    . (Refer to P12.) USB CONNECTOR (Series B) When controlling computer with Remote Control Unit of this projector, connect mouse port of your personal computer to this terminal. (Refer to P12.) RESET BUTTON This projector uses a micro processor to control this unit, and occasionally, this micro
  • Sanyo PLC-XP45 | Owners Manual - Page 12
    AUDIO IN 1 or 2 ANALOG INPUT 1 DIGITAL(DVI-D) R/C JACK AUDIO 1 USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 VIDEO/Y Cb/Pb Cr/Pr R-AUDIO-L S-VIDEO (MONO) INPUT 3 Terminals of a Projector Use one of these Control Cables corresponding with terminal of your
  • Sanyo PLC-XP45 | Owners Manual - Page 13
    EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • BNC /Pb - Cr/Pr AUDIO IN S-VIDEO ANALOG INPUT 1 DIGITAL(DVI-D) R/C JACK AUDIO 1 USB RESET CONTROL PORT AUDIO 2 G B R H/V V VIDEO/Y Cb/Pb Cr/Pr INPUT 2 VIDEO/Y
  • Sanyo PLC-XP45 | Owners Manual - Page 14
    operation. (P17, 18) MUTE D.ZOOM INPUT MENU ALL-OFF SWITCH When using Remote Control Unit, turn this switch to "ON." And turn it to "ALL OFF and press it again. LASER LENS SHIFT KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P19)
  • Sanyo PLC-XP45 | Owners Manual - Page 15
    heat. q Do not drop Remote Control Unit. q If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. q Danger of explosion if battery is incorrectly replaced. q Dispose of used batteries according to batteries manufacturers instructions and local rules. 15
  • Sanyo PLC-XP45 | Owners Manual - Page 16
    CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR Turns to yellow when life of projection lamp draws to an end. (P39) WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P38) READY INDICATOR Lights green when a projector is ready to be turned on. And
  • Sanyo PLC-XP45 | Owners Manual - Page 17
    TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. WIRELESS REMOTE CONTROL POINT BUTTON Used to move Pointer UP/ DOWN/ RIGHT
  • Sanyo PLC-XP45 | Owners Manual - Page 18
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35,-37) INPUT MENU Used to select input source (Input
  • Sanyo PLC-XP45 | Owners Manual - Page 19
    PROJECTOR 1 Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP Indicator lights bright and READY Indicator turns off. After projector projector projector on again
  • Sanyo PLC-XP45 | Owners Manual - Page 20
    image by pressing FOCUS v/w button or POINT UP/DOWN button(s) . Focus Message disappears after 4 seconds. LENS SHIFT ADJUSTMENT 1 Press LENS SHIFT button on Top Control or on Remote Control Unit. Message "Lens shift" is displayed. 2 Press POINT UP button to move image up, press POINT DOWN button
  • Sanyo PLC-XP45 | Owners Manual - Page 21
    again or press any other button except POINT / SELECT / RIGHT CLICK / P-TIMER / LASER button. NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out image. To restore to normal, press NO SHOW button again or press any other button except POINT / SELECT / RIGHT CLICK / P-TIMER
  • Sanyo PLC-XP45 | Owners Manual - Page 22
    COMPUTER INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). INPUT button INPUT 1 INPUT 2 INPUT 3 MENU
  • Sanyo PLC-XP45 | Owners Manual - Page 23
    on SYSTEM Menu icon. When image is not provided properly, manual adjustment is required. (Refer to P24 and 25.) There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.) PC SYSTEM MENU PC SYSTEM Menu icon
  • Sanyo PLC-XP45 | Owners Manual - Page 24
    cannot reproduce a proper image and image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This
  • Sanyo PLC-XP45 | Owners Manual - Page 25
    of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to Full screen cannot be adjusted when "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P23). button. Other icons operates as follows. Reset Reset all adjust parameters on adjustment dialog box to
  • Sanyo PLC-XP45 | Owners Manual - Page 26
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept a signal from all computers 12 SXGA 13 SXGA 14 SXGA 15 SXGA 16 SXGA 17 SXGA 18 SXGA 19 MAC MAC 720p (HDTV) 1035i (HDTV) 1080i (HDTV) RESOLUTION 1024 x 768 1024 x 768 1024 x 768 (Interlace) 1024 x 768 1024 x 768
  • Sanyo PLC-XP45 | Owners Manual - Page 27
    2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard Real
  • Sanyo PLC-XP45 | Owners Manual - Page 28
    better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT set and then press SELECT button. Other icons operates as follows. Reset Reset all adjustment to previous figure. Quit Closes IMAGE MENU. Store icon
  • Sanyo PLC-XP45 | Owners Manual - Page 29
    on Remote Control Unit. NOTE q True and Digital zoom +/- cannot be operated when "RGB", "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P23). q Wide cannot be selected when "720p (HDTV)", "1035i (HDTV)" or "1080i (HDTV)" is selected on PC SYSTEM Menu (P23). q This projector cannot
  • Sanyo PLC-XP45 | Owners Manual - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connecting to those equipment, select a type of Video INPUT MENU source in SOURCE SELECT Menu. 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT
  • Sanyo PLC-XP45 | Owners Manual - Page 31
    Video signal, and adjusts itself to optimize its performance. When Video System is 1035i or 1080i, select system manually first. COMPONENT VIDEO SIGNAL FORMAT If projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i
  • Sanyo PLC-XP45 | Owners Manual - Page 32
    Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34). IMAGE button Standard Cinema
  • Sanyo PLC-XP45 | Owners Manual - Page 33
    .) Noise reduction Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to "On to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off. Progressive scan Press POINT LEFT/RIGHT button(s) to change
  • Sanyo PLC-XP45 | Owners Manual - Page 34
    Reset all adjustment to previous figure. Quit Closes IMAGE MENU. Image Level Menu Move a red frame pointer to image icon to be set and then press SELECT button. Store icon PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image
  • Sanyo PLC-XP45 | Owners Manual - Page 35
    When this function is "On," picture is top / bottom and left / right reversed. This function is used to project image from a ceiling mounted projector. Ceiling function Rear When this function is "On," picture is left / right reversed. This function is used to project image to a rear projection
  • Sanyo PLC-XP45 | Owners Manual - Page 36
    to "ALL-OFF," remote transmit code automatically returns to normal code (Code 1). On start Press SELECT button at this icon to display previous items. Move pointer to item and then press POINT LEFT/RIGHT button(s). Lamp counter reset This function is used to reset Lamp Replace Counter. When
  • Sanyo PLC-XP45 | Owners Manual - Page 37
    " when controlling a computer with Remote Control of this projector. Projector mode Select " " when controlling a projector with computer. NOTE: Before you control a projector by computer, install USB driver (optionally sold parts) and set up computer following instruction in USB driver package
  • Sanyo PLC-XP45 | Owners Manual - Page 38
    wash out dust and particles. 4 Replace Air Filter properly. Make sure that Air Filter is fully inserted. CAUTION Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality. Do not put small parts into Air Intake Vents. It may
  • Sanyo PLC-XP45 | Owners Manual - Page 39
    q Model No. of your projector : PLC-XP45 q Replacement Lamp Type No. : POA-LMP38 (Service Parts No. 610 293 5868) LAMP REPLACE COUNTER Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting. 1 Turn projector on
  • Sanyo PLC-XP45 | Owners Manual - Page 40
    APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 11 ~ 13. 2. Check cable connection. Verify
  • Sanyo PLC-XP45 | Owners Manual - Page 41
    problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section on page 40, 41. To correct failure, try "Solutions". If after following all operating instructions, you find that service is necessary, contact Sanyo Service Station or store where you purchased unit. Give model
  • Sanyo PLC-XP45 | Owners Manual - Page 42
    SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Lens Throw distance Motorized Lens Shift Projection Image Size (Diagonal) Horizontal Resolution Projection Lamp
  • Sanyo PLC-XP45 | Owners Manual - Page 43
    APPENDIX CONFIGURATIONS OF TERMINALS COMPUTER INPUT-1 TERMINAL (ANALOG) Terminal : HDB15-PIN Connect display output terminal of computer to this terminal with VGA Cable (supplied). When connecting Macintosh computer, MAC Adapter (not supplied) is required. Pin Configuration 54 32 1 10 9 8 7 6 15
  • Sanyo PLC-XP45 | Owners Manual - Page 44
    Printed in Japan Part No. 610 293 5165 (1AA6P1P2856-- MA8A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Owner’s Manual
PLC-XP45
Multimedia Projector
MODEL