Sanyo PLC-XT11 Owners Manual
Sanyo PLC-XT11 - XGA LCD Projector Manual
 |
View all Sanyo PLC-XT11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC-XT11 manual content summary:
- Sanyo PLC-XT11 | Owners Manual - Page 1
Multimedia Projector MODEL PLC-XT11 PLC-XT16 Owner's Manual - Sanyo PLC-XT11 | Owners Manual - Page 2
EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL WITH - Sanyo PLC-XT11 | Owners Manual - Page 3
dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics - Sanyo PLC-XT11 | Owners Manual - Page 4
unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Numbers Trade Name Responsible party Address Telephone No. : PLC-XT11, PLC-XT16 : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street - Sanyo PLC-XT11 | Owners Manual - Page 5
19 LAMP REPLACE COUNTER 39 OPERATING WIRELESS MOUSE 40 19 MAINTENANCE 41 20 WARNING TEMP. INDICATOR 41 20 AIR FILTER CARE AND CLEANING 41 20 CLEANING PROJECTION LENS 41 20 TROUBLESHOOTING 42 20 TECHNICAL SPECIFICATIONS 44 21 CONFIGURATIONS OF TERMINALS 45 21 OPTIONAL PARTS - Sanyo PLC-XT11 | Owners Manual - Page 6
is an optional product to control and set up a projector via the network cable. By accessing to the connected projector using the web browser on your computer. It can be controlled and set up the projector remotely. Contact the sales dealer where you purchased this projector for optional parts. 6 - Sanyo PLC-XT11 | Owners Manual - Page 7
NAME OF EACH PART OF PROJECTOR FRONT TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER PROJECTION LENS LENS COVER SPEAKERS AIR INTAKE VENT BACK EXHAUST VENTS TERMINALS AND CONNECTORS HOT AIR EXHAUSTED ! Air blown from Exhaust Vents is hot. When using or installing projector, following - Sanyo PLC-XT11 | Owners Manual - Page 8
into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION For safety, unplug - Sanyo PLC-XT11 | Owners Manual - Page 9
. G Projector can be focused from 4.1' (1.2m) ~ 32.8' (10.0m). G Refer to figure below to adjust screen size. ROOM LIGHT Brightness in room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide best image. 10.8'(3.3m) 4.1'(1.2m) 39" 100" 77" 16 - Sanyo PLC-XT11 | Owners Manual - Page 10
(Refer to P20 and 36.) NOTE : THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. PROJECTION LAMP MAY MALFUNCTION. ADJUSTABLE FEET FEET LOCK LATCHES MOVING PROJECTOR Use Carry Handle when moving a projector. When moving a projector, replace Lens Cover and retract Adjustable Feet to prevent damage - Sanyo PLC-XT11 | Owners Manual - Page 11
button with a pen, which will shut down and restart the unit. Do not use RESET function excessively. CONTROL PORT CONNECTOR When controlling the computer with Remote Control Unit of this projector, connect the mouse port of your personal computer to this connector. (Refer to P12.) S-VIDEO INPUT - Sanyo PLC-XT11 | Owners Manual - Page 12
OUT COMPUTER AUDIO IN COMPUTER IN 2 DVI - I COMPUTER IN 1 AUDIO IN 1 RESET AUDIO IN 2 CONTROL PORT MONITOR OUT AUDIO OUT R - AUDIO IN - L (MONO) VIDEO S - you turn on projector and OFF computer. ON DIP 123456 1 2 3 4 56 13" MODE (640 x 480) ON ON OFF OFF OFF OFF 16" MODE (832 - Sanyo PLC-XT11 | Owners Manual - Page 13
VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • S- over S-VIDEO jack. COMPUTER IN 2 DVI - I COMPUTER IN 1 AUDIO IN 1 RESET AUDIO IN 2 CONTROL PORT MONITOR OUT AUDIO OUT R - AUDIO IN - L (MONO) VIDEO S - - Sanyo PLC-XT11 | Owners Manual - Page 14
INDICATOR Lights red while laser beam is emitted from Laser Light Window. Lights green when drag ON position. (P40) ALL OFF MUTE BUTTON Used to mute sound. (P21) ON 1234 ALL-OFF SWITCH When using Remote Control COMPUTER 2 VIDEO FOCUS LENS POWER ON-OFF BUTTON Used to turn projector on or off. - Sanyo PLC-XT11 | Owners Manual - Page 15
heat. G Do not drop Remote Control Unit. G If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries. G Danger of explosion if battery is incorrectly replaced. G Dispose of used batteries according to batteries manufacturers instructions and local rules. 15 - Sanyo PLC-XT11 | Owners Manual - Page 16
on its top. TOP CONTROLS AND INDICATORS LAMP REPLACE INDICATOR Turns yellow when the life of the projection lamp draws to an end. (P38) WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P41) READY INDICATOR Lights green when the projector is ready to be turned - Sanyo PLC-XT11 | Owners Manual - Page 17
projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. 2 MOVING POINTER Move the pointer (✽ see below) or adjust the value of item by pressing POINT button(s) on Top Control or on Remote - Sanyo PLC-XT11 | Owners Manual - Page 18
to PC input source. GUIDE WINDOW Shows selected item of to P30) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P36, 37) INPUT MENU Used ADJUST MENU Used to adjust picture image. [Contrast/Brightness/Color /Tint/Color Temp. /White balance (R/G/B) / - Sanyo PLC-XT11 | Owners Manual - Page 19
1 Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off the projector. LAMP Indicator lights bright and READY Indicator turns off. After the projector is turned off, Cooling Fans operate (for - Sanyo PLC-XT11 | Owners Manual - Page 20
corrected by KEYSTONE adjustment. Message disappears after 4 seconds. LENS SHIFT ADJUSTMENT 1 Press LENS SHIFT button on Top Control or LENS SHIFT L/M button on Remote Control Unit. Message "Lens shift" is displayed. 2 Press POINT UP button or LENS SHIFT L button to move image up, press POINT DOWN - Sanyo PLC-XT11 | Owners Manual - Page 21
to increase volume, and (-) button for decreasing. Mute Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/-) button(s). Indicates approximate level of volume. Press MUTE button to set Mute function On or - Sanyo PLC-XT11 | Owners Manual - Page 22
SELECTING INPUT SOURCE DIRECT OPERATION Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing COMPUTER 1 or COMPUTER 2 button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below - Sanyo PLC-XT11 | Owners Manual - Page 23
(Refer to P25.) When image is not provided properly, manual adjustment is required. (Refer to P26 and 27.) There is no signal input from computer. Make sure the connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 42.) PC SYSTEM MENU SYSTEM Menu icon Displays - Sanyo PLC-XT11 | Owners Manual - Page 24
projector 8 800 x 600 SVGA 9 800 x 600 SVGA 10 800 x 600 SVGA 11 800 x 600 MAC 16 832 x 624 XGA 1 1024 x 768 XGA 2 1024 x 768 XGA 3 1024 x 768 XGA 4 1280 x 960 MAC 1280 x 1024 720p (HDTV) -------- 1035i (HDTV) -------- 1080i 60(HDTV) -------- 1080i 50(HDTV) -------- H-Freq. (kHz) 61.00 - Sanyo PLC-XT11 | Owners Manual - Page 25
or on Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in PC SYSTEM Menu (P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P27 - Sanyo PLC-XT11 | Owners Manual - Page 26
reproduce a proper image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture. This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special signal formats. This - Sanyo PLC-XT11 | Owners Manual - Page 27
of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to be adjusted when "RGB", "1035i (HDTV)", "1080i50(HDTV)" or "1080i60 (HDTV)" is selected on PC SYSTEM Menu ( SELECT button. Other icons operate as follows. Reset Reset all adjust parameters on adjustment dialog box to - Sanyo PLC-XT11 | Owners Manual - Page 28
Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P29). IMAGE button Standard - Sanyo PLC-XT11 | Owners Manual - Page 29
then press SELECT button. IMAGE ADJUST Menu icon Brightness Press POINT LEFT button to adjust image darker, (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to button. Other icons operates as follows. Reset Reset all adjustment to previous figure. Quit Closes - Sanyo PLC-XT11 | Owners Manual - Page 30
squeezed video signal at 16 : 9. Digital zoom D.ZOOM L button on Remote Control Unit. Digital Zoom - When HDTV)", "1080i50 (HDTV)" or "1080i60 (HDTV)" is selected on PC SYSTEM Menu (P23). G Wide cannot be selected when "720p (HDTV 1024, reset the resolution to the lower before connecting projector. G - Sanyo PLC-XT11 | Owners Manual - Page 31
SELECTING INPUT SOURCE DIRECT OPERATION Select INPUT source by pressing INPUT button on Top Control. Select INPUT source by pressing COMPUTER 1 or VIDEO button on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). MENU - Sanyo PLC-XT11 | Owners Manual - Page 32
is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it This box indicates the system being selected. Move the pointer to the system and press SELECT button. Y, Pb/Cb, Pr/Cr JACKS Auto Projector automatically - Sanyo PLC-XT11 | Owners Manual - Page 33
Image 2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34, 35). IMAGE button - Sanyo PLC-XT11 | Owners Manual - Page 34
, and POINT RIGHT button to increase contrast. (From 0 to 63.) Brightness Press POINT LEFT button to adjust image darker, and POINT RIGHT button to mode. Dialog box display is changed to "On" to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction - Sanyo PLC-XT11 | Owners Manual - Page 35
SELECT button. Other icons operates as follows. Reset Reset all adjustment to previous figure. Quit Closes IMAGE SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, Wide Provides image at a wide screen ratio of 16 : 9. SCREEN Menu icon Move the red frame - Sanyo PLC-XT11 | Owners Manual - Page 36
data when disconnect AC Power Cord from an AC outlet. Reset ··· Reset the keystone adjustment data when disconnect AC Power Cord from an Language, Language Menu appears. Blue back When this function is "On," this projector will produce a blue image instead of the video noise on the screen - Sanyo PLC-XT11 | Owners Manual - Page 37
not operate properly. Lamp mode When selecting the " " (Eco), the projector reduce the brightness and set into Remote Control Unit. (Refer to P14.) Remote control On On Code 1 Lamp counter reset This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace - Sanyo PLC-XT11 | Owners Manual - Page 38
SCREW HANDLE LAMP ASSEMBLY ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. G Model No. of your projector : G Replacement Lamp Type No. : PLC-XT11/PLC-XT16 POA-LMP59 (Service Parts No. 610 - Sanyo PLC-XT11 | Owners Manual - Page 39
be replaced, i.e., if the LAMP REPLACE INDICATOR lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the LAMP REPLACEMENT section of this manual. ) Continuous use of the lamp with the LAMP REPLACE INDICATOR lighted may - Sanyo PLC-XT11 | Owners Manual - Page 40
your computer to Control Port of the projector with Control Cable for Serial Port (supplied). OPERATING WIRELESS MOUSE When controlling a PC Press and release the Drag ON/OFF button, DRAG ON INDICATOR lights green and the remote control is in Drag mode. Use the POINT button in the FOCUS LENS - Sanyo PLC-XT11 | Owners Manual - Page 41
non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. 2 Lightly wipe a cleaning cloth over Projection Lens. 3 When the projector is not in use, replace Lens Cover. 41 - Sanyo PLC-XT11 | Owners Manual - Page 42
back on. NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as follows: 1. LAMP indicator lights bright and READY indicator turns off. 2. After 90 seconds, READY indicator lights green again and a projector may be turned on by pressing Power ON-OFF button. Image is out of - Sanyo PLC-XT11 | Owners Manual - Page 43
High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain the difficulty. We will - Sanyo PLC-XT11 | Owners Manual - Page 44
TECHNICAL SPECIFICATIONS Projector Type Dimensions (W x H x D) Net Weight LCD Panel System Panel Resolution Number of Pixels Color System High Definition TV Signal Scanning Frequency Projection Image size (Diagonal) Horizontal Resolution Projection Lens Throw Distance Projection Lamp Computer - Sanyo PLC-XT11 | Owners Manual - Page 45
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 Analog Vert. sync 16 Hot Plug Detect 24 T.M.D.S. Clock- CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 876 5 43 21 USB CONNECTOR (Series B) Pin Configuration 21 34 PS - Sanyo PLC-XT11 | Owners Manual - Page 46
When ordering those parts, give the name and Type No. to the sales dealer. G Control Cable (PS2 Port) G Control Cable (ADB models are different in each country. Contact the sales dealer for details. When using Wireless Imager, set the following model name to PJ Controller. G PJ-Net Organizer Model - Sanyo PLC-XT11 | Owners Manual - Page 47
projector is in the Power management mode. • • • on • • • flashing • • • dim • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the Lamp Replace - Sanyo PLC-XT11 | Owners Manual - Page 48
Printed in Japan Part No. 610 308 2318 (1AA6P1P4100-- MH7A) SANYO Electric Co., Ltd
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
Owner’s Manual
PLC-XT11
Multimedia Projector
MODEL
PLC-XT16