Sanyo PLC XT20 Owners Manual
Sanyo PLC XT20 - XGA LCD Projector Manual
 |
UPC - 086483065187
View all Sanyo PLC XT20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo PLC XT20 manual content summary:
- Sanyo PLC XT20 | Owners Manual - Page 1
Multimedia Projector MODEL PLC-XT25/PLC-XT20 PLC-XT25L*/PLC-XT20L* (*Models without lens.) Owner's Manual - Sanyo PLC XT20 | Owners Manual - Page 2
on the top control or remote control (p.59). PIN code lock functions prevents unauthorized use of the projector (pp.59-61). ◆ Multiple Interface Terminals The projector has several interface terminals that can support various types of equipment and signals (pp.11-12). ◆ Lamp Control Brightness of - Sanyo PLC XT20 | Owners Manual - Page 3
54 Maintenance and Filter Cleaning . . . . .63 Cleaning the Filter 64 Resetting the Filter Counter 64 Lamp Replacement 65 Resetting the Lamp Counter 66 Warning Indicator 67 Cleaning the Projection Lens 68 Cleaning the Projector Cabinet 68 Appendix 69 Troubleshooting 69 Menu Tree - Sanyo PLC XT20 | Owners Manual - Page 4
the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Sanyo PLC XT20 | Owners Manual - Page 5
dropped or the cabinet has been damaged. f. When the projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics - Sanyo PLC XT20 | Owners Manual - Page 6
on page 62 and "Maintenance and Filter Cleaning" on pages 63-64. Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector. Exhaust Vent (Hot air exhaust) Top Control WARNING FILTER indicator Filter warning icon (red) appears on - Sanyo PLC XT20 | Owners Manual - Page 7
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture upward, downward, or backward, perpendicular to - Sanyo PLC XT20 | Owners Manual - Page 8
Instructions Moving the Projector Use the hand grip when moving the projector. Replace the lens cap and retract the adjustable feet to prevent damage to the lens and cabinet when carrying. When the projector is not in use for an extended period, put it into a suitable case to protect the projector - Sanyo PLC XT20 | Owners Manual - Page 9
unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number(s) Trade Name Responsible party Address : PLC-XT25, PLC-XT20, PLC-XT25L, PLC-XT20L : Sanyo : SANYO FISHER COMPANY : 21605 Plummer - Sanyo PLC XT20 | Owners Manual - Page 10
Part Names and Functions Front qw rt e yu i o Back !1 !2 !0 ✽ !3 !4 !5 !6 Bottom !7 o q Filter w Speaker e Lens Release Button r Top Controls and Indicators t Maintenance Cover WARNING: FOR MAINTENANCE USE ONLY. DO NOT OPEN. y Lens Cap CAUTION Do not turn on the projector with the lens - Sanyo PLC XT20 | Owners Manual - Page 11
Terminal q w Part Names and Functions output signal (Digital DVI-D type) to this terminal. The HD (HDCP compatible) signal can also be connected (pp.22, 24). y S- (Series B) Use this connector when controlling a computer with the remote control of the projector. Connect the USB terminal of your - Sanyo PLC XT20 | Owners Manual - Page 12
from computer to external video equipment (pp.22, 24). !3 CONTROL PORT CONNECTOR When controlling the projector from a computer, connect the computer to this connector with a control cable. !4 INFRARED REMOTE RECEIVER (Back) The infrared remote receiver is also located in the front (pp.10, 18 - Sanyo PLC XT20 | Owners Manual - Page 13
Top Control q w e r t y Part Names and Functions i o !0 !1 !2 u q WARNING TEMP. indicator Blinks red when the internal temperature of the projector exceeds the operating range (pp.67, 73). w LAMP REPLACE indicator Lights yellow when the projection lamp reaches its end of life (pp.65, 74). e ON/ - Sanyo PLC XT20 | Owners Manual - Page 14
Part Names and Functions Remote Control r ew q t y !2 u !1 i o !0 q STAND-BY button Turn the projector off (p.26). w WIRED REMOTE jack Connect the remote control cable (not supplied) to this jack when using as a wired remote control. e SIGNAL EMISSION indicator Lights red while the laser - Sanyo PLC XT20 | Owners Manual - Page 15
Remote Control Part Names and Functions @6 !3 @5 !4 @4 !5 @3 !6 @2 !7 @1 !8 @0 !9 @7 For PIN code and remote control code. !3 MENU button Open or close the On-Screen Menu (p.27). !4 P-TIMER button Operate the P-timer function (p.32). !5 D.ZOOM button Select the Digital zoom +/- mode - Sanyo PLC XT20 | Owners Manual - Page 16
. Signal Emission Indicator Laser Light Window Pointer Function You can move the Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. 1 Press and hold the MENU and NO SHOW buttons for more than 10 seconds to activate the Pointer function - Sanyo PLC XT20 | Owners Manual - Page 17
Part Names and Functions Wireless Mouse Operation The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 22 for connection.) When the Pointer function is used, the - Sanyo PLC XT20 | Owners Manual - Page 18
. ● Risk of an explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. Remote Control Receivers and Operating Range Point the remote control toward the projector (to Infrared Remote Receivers) when pressing the buttons. Maximum operating - Sanyo PLC XT20 | Owners Manual - Page 19
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by - Sanyo PLC XT20 | Owners Manual - Page 20
the Projector (for PLC-XT25/XT20) For projector positioning, see the figures below. The projector should Lens For details about the Lens shift function, refer to "Lens Shift Adjustment" on page 29. The amount of lens shift range varies depending on the lens. The figures below are for PLC-XT25/XT20 - Sanyo PLC XT20 | Owners Manual - Page 21
power being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning the projector on. CAUTION For safety, unplug the AC power cord when the projector is not in use. When the projector is connected to an outlet with the AC power - Sanyo PLC XT20 | Owners Manual - Page 22
's built-in speaker is disconnected. •USB cable connection is needed when operating the computer with the remote control. •See page 78 for ordering optional cables. Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. 22 AUDIO OUT (stereo) - Sanyo PLC XT20 | Owners Manual - Page 23
Input VIDEO AUDIO IN AUDIO IN VIDEO S-VIDEO Audio cable (stereo) ✔Notes: •When connecting the AUDIO OUT to external audio equipment, the projector's built-in speaker is disconnected. •The S-VIDEO jack connection overrides the VIDEO jack connection when selecting AUTO in the Input Menu (p.35 - Sanyo PLC XT20 | Owners Manual - Page 24
Cable • BNC Cable • DVI-Digital Cable (Cables are not supplied with the projector.) RGB Scart 21-pin Input Audio Output Component Video Output (Y, Cb/Pb, Cr/Pr ) RGB Scart 21-pin Output Digital Output (HDCP compatible) Scart-VGA cable Audio cable (stereo) BNC cable Scart-VGA - Sanyo PLC XT20 | Owners Manual - Page 25
will disappear after 30 seconds. Selected Input Source and Lamp Control Lamp control status See page 54 for the Lamp control status. ✔Note: •The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector. PIN Code Input Dialog Box After the OK - Sanyo PLC XT20 | Owners Manual - Page 26
the remote control again to turn off the projector. The LAMP indicator turns off and the POWER indicator starts to blink green. After the projector is not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for - Sanyo PLC XT20 | Owners Manual - Page 27
How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the top control or the remote control to display the On-Screen Menu. 2 Use the Point 7 - Sanyo PLC XT20 | Owners Manual - Page 28
the input signals. Guide Window Show the projector's operating configurations (pp.53-62). - Language - Logo - Background - Lamp control - Pointer - Remote Control - RC sensor - Display - Power management - On start - Fan control - Security - Test pattern - Warning log - Lamp counter - Filter - Sanyo PLC XT20 | Owners Manual - Page 29
with Projector Control Lens Operation The following lens operation can be made with the Lens button on the top control. Press the Lens button to enter each lens operation mode. The selected adjustment display appears on the screen. Top Control LENS button Lens Shift Adjustment Display "Lens shift - Sanyo PLC XT20 | Owners Manual - Page 30
On/Off. When the sound is turned off, "On" is displayed. Press the Point 7 8 buttons again to turn the sound back on. Top Control VOLUME +/- buttons Remote Control VOL - button VOL + button MUTE button Volume Dialog Box Approximate level of the volume. Press the MUTE button to set the Mute - Sanyo PLC XT20 | Owners Manual - Page 31
the desired screen size. The selected screen size symbol appears on the screen for 4 seconds. See pages 51-52 for details. LENS SHIFT button See page 29 for details. Remote Control AUTO PC button D.ZOOM button ZOOM buttons FOCUS buttons FREEZE button INFO. button POINT ed buttons SCREEN button - Sanyo PLC XT20 | Owners Manual - Page 32
, press the NO SHOW button again or press any other button. "No show" disappears after 4 seconds. P-TIMER button Press the P-TIMER button on the remote control. The PTimer display "00:00" appears on the screen and the countdown starts (00:00-59:59). To stop the countdown, press the P-TIMER button - Sanyo PLC XT20 | Owners Manual - Page 33
of equipment connected to the projector. This projector has three input options (INPUT 1, INPUT 2, and INPUT 3) and they are categorized by different signal type. Select an input source with the INPUT button on the top control or the INPUT 1-3 buttons on the remote control, or by On-Screen Menu - Sanyo PLC XT20 | Owners Manual - Page 34
Remote Control Remote Control button operation INPUT buttons Remote Control Operation Press the INPUT 1, INPUT 2, or INPUT 3 buttons on the remote control. The input source appears on the screen as you press each button. Select the connected input source. RGB (Scart) RGB (PC digital) RGB (AV HDCP - Sanyo PLC XT20 | Owners Manual - Page 35
the HDCP video signal is connected. INPUT 2 RGB When the RGB PC signal is connected. Video When the RGB video signal is connected. Component* When the component signal is connected. *If the projector cannot reproduce proper video image, select a system manually (see "Video System Selection - Sanyo PLC XT20 | Owners Manual - Page 36
system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL - Sanyo PLC XT20 | Owners Manual - Page 37
available with the digital video signals (AV HDCP) input. HELPFUL HINTS! We frequently receive projector's INPUT 1 or INPUT 2 terminals properly? ● Are the projector's input terminal and the connected computer signal selected properly with the INPUT 1 or INPUT 2 buttons on the remote control - Sanyo PLC XT20 | Owners Manual - Page 38
XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector the connection between your computer and the projector. (See "Troubleshooting" on page 69.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. - Sanyo PLC XT20 | Owners Manual - Page 39
pressing the AUTO PC button on the remote control. Remote Control AUTO PC button Menu Operation Auto PC the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can is not provided properly with this operation, manual adjustments are required (pp.40-41). • - Sanyo PLC XT20 | Owners Manual - Page 40
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen - Sanyo PLC XT20 | Owners Manual - Page 41
Display area H Use the Point 7 8 buttons to adjust the horizontal area displayed by this projector. Display area V Use the Point 7 8 buttons to adjust the vertical area displayed by this projector. Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box - Sanyo PLC XT20 | Owners Manual - Page 42
Computer Adjustment MEMO 42 - Sanyo PLC XT20 | Owners Manual - Page 43
Image Mode Selection You can choose an image mode in accordance with each projected image such as presentation screen, movies, etc. You can also adjust image parameters in the Image Adjust Menu and save them as Image 1-4. The four image modes with respect to each input source are stored. Select - Sanyo PLC XT20 | Owners Manual - Page 44
pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. (This icon is This icon is displayed with the video signal.) Image 1-4 For viewing with the user preset image mode in the Image Adjust Menu (see page 48). This Image - Sanyo PLC XT20 | Owners Manual - Page 45
signal can be displayed in progressive mode reproducing highly detailed images. The adjusted parameters are stored and called up later when needed. Maximum of four user image modes (Image 1-Image 4) are available and they can be called up in the Image Menu (see "Image Mode Selection" on pages 43-44 - Sanyo PLC XT20 | Owners Manual - Page 46
Image Adjustment Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the SELECT button to display the - Sanyo PLC XT20 | Owners Manual - Page 47
Disabled. L1........... For an active picture. L2........... For a still picture. Film ........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Image Adjustment ✔Notes: •Noise reduction and Progressive cannot be selected when 480p - Sanyo PLC XT20 | Owners Manual - Page 48
Image Adjustment Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons - Sanyo PLC XT20 | Owners Manual - Page 49
Screen Adjustment You can change or adjust the appearance of the image as well as the image orientation with the following options. Screen size Select a screen size conforming to the input signal source. Digital zoom Zoom up and down the images. (Only available with the computer signals.) Keystone - Sanyo PLC XT20 | Owners Manual - Page 50
function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Ceiling Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the - Sanyo PLC XT20 | Owners Manual - Page 51
the screen size with the D.ZOOM buttons on the remote control. ✔Notes: •The projector cannot display any resolution higher than 1600 x 1200. If your computer's screen resolution is higher than that, lower the resolution before connecting to the projector. •The image data other than 1024 x 768 is - Sanyo PLC XT20 | Owners Manual - Page 52
Screen Adjustment Screen Size Adjustment (Video, Component Signals) 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired function and then - Sanyo PLC XT20 | Owners Manual - Page 53
Power management-------- Set the Power management function Fan control Set the cooling fans' operation Lamp counter Check the lamp time and reset the lamp counter Filter counter Set the filter cleaning timing On start Turn on the projector automatically when the AC cord is connected. Test - Sanyo PLC XT20 | Owners Manual - Page 54
Setting This projector has : •When no captured image is set, the "User" options is not available. Lamp control This function allows you to change brightness of the Lower brightness reduces the lamp lower consumption and extends the lamp life. Pointer You can emphasize a part of the projected image - Sanyo PLC XT20 | Owners Manual - Page 55
the projected image. After capturing the projected image, go to the Logo select function and set it to "User". Then the captured image will be displayed the next time you turn on the projector or when you press the NO SHOW button (see page 32). To cancel the Capture function, select [No - Sanyo PLC XT20 | Owners Manual - Page 56
Enter a Logo PIN code Use the Point ed buttons or Number buttons on the remote control to enter a number. Press the Point 8 button to fix the number and "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect Logo PIN code, "Logo PIN code" and the - Sanyo PLC XT20 | Owners Manual - Page 57
when the lamp is not bright enough. Off Hide the On-Screen Displays except; ●On-Screen Menu ●"Power off?" (p.26) ●"No signal" for Power management (p.58) ●"Please wait ..." ●White arrows for the True function in the Screen Menu (p.51) ●"Filter warning" icon (red) (p.74) Remote control Display - Sanyo PLC XT20 | Owners Manual - Page 58
reconnected or any button on the top control or remote control is pressed. Shut down.......... When the lamp has been fully cooled down, the power will be turned off. Off Power management function is off. On start When this function is set to "On," the projector will be automatically turned on just - Sanyo PLC XT20 | Owners Manual - Page 59
AUTO PC, FREEZE, and INFO. buttons. If the top control accidentally becomes locked and you do not have the remote control nearby or there is something wrong with your remote control, contact the dealer where you purchased the projector or the service center. Key lock Select Key lock. Use the Point - Sanyo PLC XT20 | Owners Manual - Page 60
. Enter a PIN code Use the Point ed buttons or Number buttons on the remote control to enter a number. Press the Point 8 button to fix the number and "Set." Press the SELECT button so that you can start to operate the projector. If you entered an incorrect PIN code, "PIN code" and the number will - Sanyo PLC XT20 | Owners Manual - Page 61
available for use when setting up the projector. CAUTION: WHEN YOU HAVE CHANGED THE lamp counter. When the lamp life is left less than 100 hours, the Lamp replacement icon appears on the screen, indicating that the end of lamp life is approaching. When replacing the projection lamp, reset the lamp - Sanyo PLC XT20 | Owners Manual - Page 62
environment. Factory default This function returns all setting values except for the user logo, PIN code lock, Logo PIN code lock, lamp counter, and filter counter to the factory default settings. Quit Exit the Setting Menu. Filter warning icon (yellow) appears on the screen at a set time. ✔Note - Sanyo PLC XT20 | Owners Manual - Page 63
required. The instructions described here will help minimize the need for optical cleaning, reduce the likelihood of costly repairs, and maximize lamp life. The projector uses a lamp which generates significant heat and thus requires a large amount of air to be drawn through the filter to cool the - Sanyo PLC XT20 | Owners Manual - Page 64
put anything into the air vents. Doing so may result in malfunction of the projector. Press and hold the filter cover and pull out the filter. NOTE: If the filter is heavily clogged and unable to clean, replace it with a new one. Consult your dealer for details. Replacement Filter Part No.: 910-330 - Sanyo PLC XT20 | Owners Manual - Page 65
Screw Handle Screws ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : PLC-XT25, PLC-XT20, PLC-XT25L, PLC-XT20L ● Replacement Lamp Type No. : POA-LMP105 (Service Parts No. 610 330 - Sanyo PLC XT20 | Owners Manual - Page 66
the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator - Sanyo PLC XT20 | Owners Manual - Page 67
condition to see if the air vents of the projector are not blocked. - Has the projector been installed near an Air-Conditioning/ Heating Duct or Vent? Move the installation of the projector away from the duct or vent. - Is the filter clean? Clean the filter periodically or replace it with a new one - Sanyo PLC XT20 | Owners Manual - Page 68
paper or commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. When the projector is not in use, replace the lens cap. Cleaning the Projector Cabinet Unplug the AC - Sanyo PLC XT20 | Owners Manual - Page 69
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. -Make sure you have properly connected the projector monitor output when connecting to the projector See your computer's instruction manual for the setting. - It takes about 30 seconds to - Sanyo PLC XT20 | Owners Manual - Page 70
cord. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Sanyo PLC XT20 | Owners Manual - Page 71
3 SYSTEM (1) Mode 1 Mode 2 XGA 1 - - - - RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) Quit RGB Video Component Quit Auto Video V-sync freq. Screen Language Lamp status Power management Security Key lock PIN code lock Remote control code Image Dynamic Standard Real Cinema - Sanyo PLC XT20 | Owners Manual - Page 72
/Off Security Key lock Off Projector (all) Projector (part) Remote control (all) Remote control (part) PIN code lock Off/On 1/On 2 PIN code change Quit Test pattern 8 test patterns provided Quit Warning log Lamp counter Hour(s) Reset Yes/No Quit Filter counter Hour(s) Off/100H - Sanyo PLC XT20 | Owners Manual - Page 73
to turn on the projector. POWER, LAMP, WARNING TEMP., WARNING FILTER, and LAMP REPLACE indicators are blinking all together. The projector is operating normally. The temperature inside the projector is abnormally high. The projector cannot be turned on. When the projector is cooled down enough - Sanyo PLC XT20 | Owners Manual - Page 74
when the projector detects filter clogging. ✔Note: •The Filter warning icon (red) will not appear during "Freeze" (p.31), or "Now show" (p.32). LAMP REPLACE indicator Indicators POWER green LAMP red LAMP REPLACE yellow Projector Condition The lamp cannot light up. (The projector is preparing - Sanyo PLC XT20 | Owners Manual - Page 75
Compatible Computer Specifications Basically this projector can accept the signal SVGA 6 SVGA 7 SVGA 8 SVGA 9 SVGA 10 SVGA 11 MAC 16 XGA 1 XGA 2 XGA 3 XGA 4 XGA 5 XGA 6 XGA 7 XGA 8 XGA 9 XGA 10 XGA 11 XGA 12 XGA 13 XGA 14 XGA 15 MAC 19 RESOLUTION 640 x 480 720 x 400 640 x 400 640 x 480 640 x 480 - Sanyo PLC XT20 | Owners Manual - Page 76
when Input 1 [RGB (PC digital)] is selected in the Input Menu. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 8 RESOLUTION 640 x 480 640 x 480 768 x 575 800 x 600 1024 x 768 1366 x 768 1360 x 768 1376 x 768 1360 x 768 - Sanyo PLC XT20 | Owners Manual - Page 77
(Diagonal) Throw Distance Projection Lens Projection Lamp Adjustable from 30" to 300" (PLC-XT25/PLC-XT20) 3.9'-32.8' (1.2 m-10.0 m) F=1.7 to 2.1, f=33 to 43 mm with motor zoom and focus 300 W Interface Input 1 Input 2 Input 3 AUDIO IN Analog Out Audio Out R/C Jack Control Port USB Connector Option - Sanyo PLC XT20 | Owners Manual - Page 78
Appendix Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries VGA Cable USB Cable Lens Cap (for PLC-XT25/XT20) Lens Mount Cover (for PLC-XT25L/XT20L) PIN Code Label ● The specifications are subject to change without notice. ● LCD panels are - Sanyo PLC XT20 | Owners Manual - Page 79
supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input Input 1 RGB (PC Analog) RGB (Scart) RGB (PC Digital) RGB (AV HDCP) Input 2 Video Component RGB Input 3 Auto Video S-video Input 4 Network PJLink Input RGB - Sanyo PLC XT20 | Owners Manual - Page 80
20 No Connect 21 No Connect 22 T.M.D.S. Clock Shield 23 T.M.D.S. Clock+ 24 T.M.D.S. Clock- USB CONNECTOR (Series B) 1 Vcc 21 2 - Data 3 + Data 34 4 Ground CONTROL PORT CONNECTOR Terminal : Mini DIN 8-PIN 876 5 43 21 1 R X D 5 RTS/CTS 2 ----- 6 TXD 3 ----- 7 GND 4 GND 8 GND 80 - Sanyo PLC XT20 | Owners Manual - Page 81
Number Memo Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. PIN Code Lock No. Factory default set No: 1 2 3 4* Logo PIN Code Lock No. Factory default set - Sanyo PLC XT20 | Owners Manual - Page 82
Appendix Dimensions Unit: inch (mm) 13.7 (348.1) 3.40 (86.4) 6.46 (164) 5º MAX 1.65 (41.9) 21.09 (535.7) 17.48 (444) 82 10.85 (275.5) 11.10 (282) 7.87 (200) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) - Sanyo PLC XT20 | Owners Manual - Page 83
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
 |
 |
Multimedia Projector
MODEL
PLC-XT25/PLC-XT20
PLC-XT25L
*
/PLC-XT20L
*
(*Models without lens.)
Owner’s Manual