Sanyo PLC-XU300 Instruction Manual, PLC-XU300A - Page 32

Computer Input Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures. Mode free Mode free To clear the stored data, select Mode free and then press the Point 8 button or the SELECT button. Move the highlight to the Mode that you want to clear and then press the SELECT button. Store To store the adjusted data, select Store and then press the Point 8 button or the SELECT button. Move the highlight to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button. This Mode has stored parameters. Values of Total dots, Horizontal, Vertical, Display area H, and Display area V. Store Vacant ✔ Note: • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.29). • When input computer signal to the projector, PC adjust will become available. Press MENU button to close this dialog box. 32 Press SELECT button to store adjusted data