Sanyo PLC-XU300 Instruction Manual, PLC-XU300A - Page 51
Power management, Ready, Shut down, Timer, signal, Ready: 5 Min
UPC - 086483073830
View all Sanyo PLC-XU300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not operated for a certain period. Select one of the following options: Ready When the lamp has been fully cooled down, the POWER indicator changes to green blinking. In this condition, the projection lamp will be turned on if the input signal is reconnected or any button on the top control or remote control is pressed. Shut down........... When the lamp has been fully cooled down, the power will be turned off. Off Power management function is off. Timer If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer display with No signal appears. It starts the countdown until the lamp is turned off. Use the Point ed buttons to set the Timer(1~30min.). Power management Time left before Lamp is off. ✔Note: Factory default is Ready: 5 Min. Setting 51