Sanyo PLC-XU300 Instruction Manual, PLC-XU300A - Page 58

Information Input Source Information Display The Information Menu is used for checking the status of the image signal being projected and the operation of the projector. Direct Operation Press the INFO. button on the remote control to display the Information Menu. Remote Control Menu Operation Press the Point ed buttons to select the Information. The Information Menu is displayed. See below for displayed information. Input The selected input source is displayed. H-sync freq. The horizontal frequency of the input signal is displayed in KHz, or - - - - KHz when no signal. V-sync freq. The vertical frequency of the input signal is displayed in Hz, or - - - - Hz when no signal. Numbers of Hz doubles when during Interlace. Screen The selected screen size is displayed. Language The selected language is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management Off, Ready, Shut down or Timer is displayed. Key lock The selected Key lock icon is displayed. PIN code lock Off or On 1 or On 2 is displayed. Remote control The selected remote code is displayed. Information Menu INFO. button 58