Sanyo PLC XU35 Owners Manual

Sanyo PLC XU35 - XGA LCD Projector Manual

Get Sanyo PLC XU35 - XGA LCD Projector PDF manuals and user guides View all Sanyo PLC XU35 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLC XU35 manual content summary:

  • Sanyo PLC XU35 | Owners Manual - Page 1
    Multimedia Projector MODEL PLC-XU30 PLC-XU35 Owner's Manual
  • Sanyo PLC XU35 | Owners Manual - Page 2
    projector from the power outlet. READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE
  • Sanyo PLC XU35 | Owners Manual - Page 3
    , be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. Upon completion of any service or repairs to this projector, ask the
  • Sanyo PLC XU35 | Owners Manual - Page 4
    party Address Telephone No. : PLC-XU30U, PLC-XU30E, PLC-XU30B, PLC-XU35U, PLC-XU35E, PLC-XU35B : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC POWER CORD REQUIREMENT The AC Power Cord supplied with this projector meets the requirement for use
  • Sanyo PLC XU35 | Owners Manual - Page 5
    AND CLEANING 38 TURNING ON / OFF PROJECTOR 19 CLEANING PROJECTION LENS 38 ADJUSTING SCREEN ZOOM ADJUSTMENT FOCUS ADJUSTMENT 20 20 20 LAMP REPLACEMENT LAMP REPLACE COUNTER TROUBLESHOOTING 39 39 40 KEYSTONE ADJUSTMENT 20 TECHNICAL SPECIFICATIONS 42 PICTURE FREEZE FUNCTION 20 NO SHOW
  • Sanyo PLC XU35 | Owners Manual - Page 6
    solves this problem by digitally altering projection to produce undistorted images. x Power Management Power Management function is provided to reduce power consumption while a projector is not in use. This Power Management function operates to turn Projection Lamp off when a projector detects
  • Sanyo PLC XU35 | Owners Manual - Page 7
    and metallic part. This area will become hot while a projector is used. This projector detects internal temperature and automatically controls operating power of Cooling Fans. LENS COVER BACK TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER POWER CORD CONNECTOR BOTTOM LAMP COVER ADJUSTABLE
  • Sanyo PLC XU35 | Owners Manual - Page 8
    shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect a projector with a peripheral equipment before turning a projector on. (Refer to pages 11 ~ 13 for connection.) CAUTION
  • Sanyo PLC XU35 | Owners Manual - Page 9
    flat projection surface. q The projector can be focused from 5.3'(1. Lift the front of a projector and pull FEET LOCK LATCHES on the both sides of a projector. 2 Release FEET LOCK To retract ADJUSTABLE FEET, lift the front of a projector and pull and undo FEET LOCK LATCHES. Keystone distortion of
  • Sanyo PLC XU35 | Owners Manual - Page 10
    cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this bag. The projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet
  • Sanyo PLC XU35 | Owners Manual - Page 11
    Connect the audio output (stereo) from computer to this jack. (Refer to P13.) USB CONNECTOR (Series B) When controlling the computer with Remote Control Unit of this projector, connect USB port of your personal computer to this connector. (Refer to P13.) ✽ Do not press this button. This button is
  • Sanyo PLC XU35 | Owners Manual - Page 12
    computer. CONTROL PORT MCI COMPUTER IN ANALOG NOTE : When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on. x MAC ADAPTER (Not supplied
  • Sanyo PLC XU35 | Owners Manual - Page 13
    RESET MCI COMPUTER IN ANALOG USB CONTROL PORT AUDIO OUT AUDIO IN Terminals of the Projector Audio Cable (Stereo) ✽ NOTE : When connecting the cable, the power cords of both the projector and the external equipment should be disconnected from AC outlet. Audio Input External Audio Equipment
  • Sanyo PLC XU35 | Owners Manual - Page 14
    operation. (P17, 18) MUTE D.ZOOM INPUT MENU ALL-OFF SWITCH When using Remote Control Unit, turn this switch to "ON." And turn it to "ALL . LASER KEYSTONE NO SHOW FREEZE AUTO PC ADJ. IMAGE P-TIMER POWER ON-OFF BUTTON Used to turn projector on or off. (P19) INPUT BUTTON Used to select input
  • Sanyo PLC XU35 | Owners Manual - Page 15
    ) Operating Range Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about are in contact with the pins in the compartment. 3 Replace the compartment lid. To insure safe operation, please observe the
  • Sanyo PLC XU35 | Owners Manual - Page 16
    BUTTONS (TOP CONTROLS) and INDICATORS on its top. WARNING TEMP. INDICATOR Flashes red when internal projector temperature is too high. (P38) LAMP REPLACE INDICATOR Turns to yellow when the life of the projection lamp draws to an end. (P39) MENU BUTTON Used to open or close MENU operation. (P17
  • Sanyo PLC XU35 | Owners Manual - Page 17
    TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. 1 DISPLAY MENU Press MENU button to display ON-SCREEN MENU. WIRELESS REMOTE CONTROL POINT BUTTON Used to move the Pointer UP/ DOWN
  • Sanyo PLC XU35 | Owners Manual - Page 18
    Press MENU BUTTON while connecting to PC input source. GUIDE WINDOW Shows selected item of ONSCREEN MENU. PC SYSTEM / Digital zoom +/-] (Refer to P29) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer to P35, 36) INPUT MENU Used to select input source either
  • Sanyo PLC XU35 | Owners Manual - Page 19
    Display disappears after 30 seconds. TURNING OFF PROJECTOR 1 Press POWER ON-OFF button on Top Control or on Remote Control Unit, and a message "Power off?" appears on a screen. 2 Press POWER ON-OFF button again to turn off projector. LAMP Indicator lights bright and READY Indicator turns off
  • Sanyo PLC XU35 | Owners Manual - Page 20
    w button or POINT DOWN button to reduce the lower part. Reduce the upper width with KEY STONE v button or POINT UP button. Reduce the lower width with KEY STONE w button or POINT DOWN button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To
  • Sanyo PLC XU35 | Owners Manual - Page 21
    restore to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. The timer display "00 : 00" appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop
  • Sanyo PLC XU35 | Owners Manual - Page 22
    on Remote Control Unit. If projector cannot SPECIFICATION" on page 23). When selecting Computer, this projector projector is set correctly. (Refer to TROUBLESHOOTING on page 40.) PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. SELECT COMPUTER SYSTEM MANUALLY This projector
  • Sanyo PLC XU35 | Owners Manual - Page 23
    COMPUTER INPUT COMPATIBLE COMPUTER SPECIFICATIONS Basically this projector can accept the signal from all computers with the V, H-Frequency 1280 x 1024 H-Freq. (kHz) 63.981 60.276 31.65 NOTE : Specifications are subject to change without notice. V-Freq. (Hz) 60.020 58.069 29.8 (Interlace) 23
  • Sanyo PLC XU35 | Owners Manual - Page 24
    button on Remote Control Unit. Store adjustment parameters. Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once Adjustment function. When the image is not provided properly through this function, manual adjustments are required. (Refer to page 25, 26.) q Auto PC
  • Sanyo PLC XU35 | Owners Manual - Page 25
    to precisely adjust several parameters to match with those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it. Note : This PC ADJUST Menu cannot be
  • Sanyo PLC XU35 | Owners Manual - Page 26
    SELECT button at Display area icon and Display area dialog box appears. Display area Display area V Adjustment of vertical area displayed with this projector. Press POINT LEFT/RIGHT button(s) to decrease/increase value and then press SELECT button. Full screen Press POINT LEFT/RIGHT button(s) to
  • Sanyo PLC XU35 | Owners Manual - Page 27
    2, Image 3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Real Picture level with improved halftone for graphics. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P28). IMAGE button Standard Real
  • Sanyo PLC XU35 | Owners Manual - Page 28
    0 to 63.) Gamma Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.) 3 Store To store manually preset image, move a red frame pointer to Store icon and press SELECT button. Image Level Menu will appear. Move a red frame pointer to the Image
  • Sanyo PLC XU35 | Owners Manual - Page 29
    A projected image can be also expanded by pressing D.ZOOM v button on Remote Control Unit. Digital Zoom - When Digital zoom - is selected, ON- selected when "RGB" is selected on PC SYSTEM Menu (P22). q This projector cannot display any resolution higher than 1280 X 1024. If your computer's screen
  • Sanyo PLC XU35 | Owners Manual - Page 30
    VIDEO INPUT SELECTING INPUT SOURCE DIRECT OPERATION Choose Video by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). INPUT button Video Computer MENU OPERATION 1
  • Sanyo PLC XU35 | Owners Manual - Page 31
    to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL
  • Sanyo PLC XU35 | Owners Manual - Page 32
    3 and Image 4 by pressing IMAGE button on Top Control or on Remote Control Unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the picture with fine tone. IMAGE 1~4 User preset picture adjustment in IMAGE ADJUST Menu (P34). IMAGE button Standard Cinema
  • Sanyo PLC XU35 | Owners Manual - Page 33
    VIDEO INPUT IMAGE LEVEL ADJUSTMENT 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 2 Press POINT DOWN button to move a red frame pointer to the item that you want to adjust and then press SELECT button. The
  • Sanyo PLC XU35 | Owners Manual - Page 34
    icon Image Level Menu Move a red frame pointer to the image icon to be set and then press SELECT button. PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press MENU button and ON-SCREEN MENU will appear. Press
  • Sanyo PLC XU35 | Owners Manual - Page 35
    On-Screen Displays. On ··· shows all the On-Screen Displays. Off ···· sets On-Screen Displays disappeared except; q ON-SCREEN MENU q "Power off?" message Logo When this function is "On," projector displays our logo when starting up. Move a pointer to the item and then press POINT LEFT/RIGHT button
  • Sanyo PLC XU35 | Owners Manual - Page 36
    code (Code 1), operate both projector and Remote Control in the ways above again. NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to "ALL-OFF," the remote transmit code automatically returns to the normal code (Code 1). Lamp counter reset This function is used
  • Sanyo PLC XU35 | Owners Manual - Page 37
    APPENDIX OPERATING WIRELESS MOUSE Wireless Remote Control Unit is not only able to operate this projector but also usable as mouse port, connect Serial Port of your computer to Control Port of the projector with Control Cable for Serial Port (not supplied). OPERATING WIRELESS MOUSE When
  • Sanyo PLC XU35 | Owners Manual - Page 38
    Replace Air Filter properly. Make sure that Air Filter is fully inserted. CAUTION Do not operate the projector with Air Filter removed. Dust may accumulate on LCD Panel and Projection Mirror degrading picture quality. Do not put small parts authorized dealer or service station for proper cleaning
  • Sanyo PLC XU35 | Owners Manual - Page 39
    . q Model No. of your projector : PLC-XU30 / PLC-XU35 q Replacement Lamp Type No. : POA-LMP35 (Service Parts No. 610 293 2751) LAMP REPLACE COUNTER Be sure to reset Lamp Replace Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE Indicator stops lighting. 1 Turn
  • Sanyo PLC XU35 | Owners Manual - Page 40
    Problem: No power. Try these Solutions q Plug a projector into your AC outlet. q Make sure READY Indicator lights. q Wait 90 seconds after a projector is turned OFF when turning the projector back on. NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as follows: 1. LAMP
  • Sanyo PLC XU35 | Owners Manual - Page 41
    WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain the difficulty
  • Sanyo PLC XU35 | Owners Manual - Page 42
    mm with motor zoom and focus Throw Distance Projection Lamp 5.3' Owner's Manual AC Power Cord Wireless Remote Control Transmitter and Batteries VGA Cable Control Cable for PS/2 port Carrying Bag Lens Cover q The specifications are subject to change without notice. OPTIONAL PARTS The parts
  • Sanyo PLC XU35 | Owners Manual - Page 43
    connecting the Macintosh computer, MAC Adapter (not supplied) is required. Pin Configuration 54 32 1 10 9 8 7 6 15 14 13 12 11 1 Red Input 9 +5V Power 2 Green Input 10 Ground (Vert.sync.) 3 Blue Input 11 Sense 0 4 Sense 2 12 DDC Data 5 Ground (Horiz.sync.) 13 Horiz. sync. 6 Ground (Red
  • Sanyo PLC XU35 | Owners Manual - Page 44
    Printed in Japan Part No. 610 292 5432 (1AA6P1P2762-- MS6A) SANYO Electric Co., Ltd
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
Owner’s Manual
PLC-XU30
Multimedia Projector
MODEL
PLC-XU35