Sanyo PLV Z5 Owners Manual

Sanyo PLV Z5 - LCD Projector - HD 720p Manual

Get Sanyo PLV Z5 - LCD Projector - HD 720p PDF manuals and user guides View all Sanyo PLV Z5 manuals
Add to My Manuals
Save this manual to your list of manuals

Sanyo PLV Z5 manual content summary:

  • Sanyo PLV Z5 | Owners Manual - Page 1
    Multimedia Projector MODEL PLV-Z5 PLV-Z5BK Owner's Manual
  • Sanyo PLV Z5 | Owners Manual - Page 2
    ON/STAND-BY button. ◆ Lens Shift The Lens Shift function provides a greater installation flexibility. You can use the projector at desired places without images being distorted (see page 15). ◆ Color Management The Color management function allows you to adjust the details of picture colors to suit
  • Sanyo PLV Z5 | Owners Manual - Page 3
    43 Cleaning the Air Filters 45 Cleaning the Projection Lens 46 Cleaning the Projector Cabinet 46 Lamp Replacement 47 Lamp Replacement Counter 48 Appendix 49 Troubleshooting 49 Indicators and Projector Condition 50 Menu Tree 51 System Mode Chart 53 Technical Specifications 54
  • Sanyo PLV Z5 | Owners Manual - Page 4
    INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE OWNER'S MANUAL
  • Sanyo PLV Z5 | Owners Manual - Page 5
    with the projector. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit projector exhibits a distinct change in performance, this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement
  • Sanyo PLV Z5 | Owners Manual - Page 6
    cool down the projector. The fan's running speed is changed according to the temperature inside the projector. Air Intake Vents Exhaust Vent (Hot air exhaust) Installing the Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp life and cause fire
  • Sanyo PLV Z5 | Owners Manual - Page 7
    -Z5, PLV-Z5BK : Sanyo : SANYO FISHER COMPANY : 21605 Plummer Street, Chatsworth, California 91311 : (818)998-7322 AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC Power Cord for the United States and Canada
  • Sanyo PLV Z5 | Owners Manual - Page 8
    Vertical Lens Shift Ring (Up/Down) o Horizontal Lens Shift Ring (Left/Right) !0 Lens Shift Lock !1 Terminals and Connectors !2 Power Cord Connector !3 Main On/Off Switch !4 Air Intake Vents/Air Filters ✽ Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector
  • Sanyo PLV Z5 | Owners Manual - Page 9
    to this jack (p.16). e COMPONENT 1 or COMPONENT 2 Connect the component video output signal to these jacks (p.16). r SERVICE PORT This jack is used to service the projector. t HDMI 1/HDMI 2* Connect the HDMI output signal from video equipment to these terminals (p.17). y VIDEO Connect the composite
  • Sanyo PLV Z5 | Owners Manual - Page 10
    detects an abnormal condition. - Blinks red when the internal temperature of the projector exceeds the operating range (pp.42, 50). r LAMP REPLACE indicator Lights yellow light when the projection lamp reaches its end of life (pp.47, 50). t MENU button Open or close the On-Screen Menu (p.20
  • Sanyo PLV Z5 | Owners Manual - Page 11
    q POWER ON/STAND-BY button Turn the projector on or off (pp.18, 19). w NO SHOW button Temporarily turn off the image on the screen (p.23). e LIGHT button Light up the remote control buttons for about 10 seconds (p.22). r LAMP CONTROL button Select a lamp mode (pp.22, 29). t MENU button Open
  • Sanyo PLV Z5 | Owners Manual - Page 12
    the remote control is about 16.4' (5 m) and 60 degrees in front of the projector. 16.4' (5 m) 60° Remote control Remote Control Battery Installation 1 Open the battery ● Risk of explosion if battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 12
  • Sanyo PLV Z5 | Owners Manual - Page 13
    to limit ambient lighting in order to obtain the best image. • All measurements are approximate and may vary from the actual sizes. Adjustable Feet Projection angle can be adjusted up to 7.7 degrees with the adjustable feet. 1 Rotate the adjustable feet and tilt the projector to the proper
  • Sanyo PLV Z5 | Owners Manual - Page 14
    being supplied, consult your authorized dealer or service station. Connect the projector with all peripheral equipment before turning it on sales dealer. Projector side For the U.S.A. and Canada Ground AC outlet side For Continental Europe For the U.K. To power cord connector on your projector
  • Sanyo PLV Z5 | Owners Manual - Page 15
    left and right manually with the Lens Shift Rings, enabling you to adjust the position of a projected image. After adjusting the position, lock the lens with the Lens Shift Lock. Move the projection lens to the left or right with the Horizontal Lens Shift Ring. Move the projection lens up or down
  • Sanyo PLV Z5 | Owners Manual - Page 16
    /Cb, Pr/Cr) ✔Notes: • To order the optional cables, see page 55. • When connecting HDTV equipment to the projector's COMPONENT 1/2 terminals, horizontal line noise may be noted only occasionally. Then adjust the value of Fine sync. The factory default value of Fine sync is "10." The setting can be
  • Sanyo PLV Z5 | Owners Manual - Page 17
    RGB Scart 21-pin Output HDMI Cable HDMI S-VIDEO COMPONENT 1 SERVIC HDMI 1 HDMI 2 COMPUTER COMPONENT 2 VIDEO Y Pb/Cb order the optional cables, see page 55. Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. COMPUTER S-VIDEO
  • Sanyo PLV Z5 | Owners Manual - Page 18
    projector's AC power cord into an AC outlet and turn the Main On/Off switch on. The POWER indicator lights red. 3 Press the POWER ON/STAND-BY button on the top control or on the remote control. The POWER indicator turns green and the cooling fans handling manually. Do not touch the slide shutter while
  • Sanyo PLV Z5 | Owners Manual - Page 19
    may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours. • The running speed of cooling fans is changed according to the temperature inside the projector. • If the WARNING indicator blinks or emits red light, see "Warning Indicator" on page
  • Sanyo PLV Z5 | Owners Manual - Page 20
    projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual Control LAMP NO
  • Sanyo PLV Z5 | Owners Manual - Page 21
    , Vivid, and User image 1 - 4 (p.27). w Image adj. Adjust Brightness, Contrast, Color, Tint, Color temp., White balance (R/G/B), Sharpness, Lamp control, Gamma, Progressive, Lens iris, Advanced menu, Reset, and Store (pp.28 - 32). e Picture adj. Select Overscan, Horizontal, Vertical, Auto adj., Fine
  • Sanyo PLV Z5 | Owners Manual - Page 22
    Operation Zoom and Focus Adjustment Rotate the Zoom light is automatically turned off when no buttons on the remote control are pressed for 10 seconds. FREEZE button Press the FREEZE button to freeze the picture on the screen. To cancel, press the FREEZE button again or press any other button. LAMP
  • Sanyo PLV Z5 | Owners Manual - Page 23
    limited to when selecting the Image Mode Adjustment Menu (pp.28 - 32), Picture Adjustment Menu (p.33) and the Keystone function adjusting each Image adj. Menu item, it will enter the main menu. Remote Control LAMP CONTROL LAMP NO SHOW FREEZE MENU RESET OK SCREEN button BRIGHTNESS button LENS
  • Sanyo PLV Z5 | Owners Manual - Page 24
    Input Input Source and System Selection Press the INPUT button on the top control or the INPUT buttons on the remote control (see below) to choose an input source. ✔Note: • Before selecting an input source with these buttons, each input must be set on a proper signal form via menu operation (see on
  • Sanyo PLV Z5 | Owners Manual - Page 25
    the incoming video system and adjusts itself to optimize its performance. When the video system is PAL-M or PAL-N, select the system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce a proper video image, select a specific broadcast signal format from among
  • Sanyo PLV Z5 | Owners Manual - Page 26
    incoming video signal and adjusts itself to optimize its performance. If the output signal of video equipment and the input signal of the projector do not match, you might not get an image with the best quality. If the blacks of the picture appears unclear (too dark or too light), try "HDMI setup
  • Sanyo PLV Z5 | Owners Manual - Page 27
    brightish room. Creative cinema For viewing contrasty 3D images in a dark room. Pure cinema For images faithfully reproduced without any control by the projector in a dark room. Living For viewing ADJ. BRIGHTNESS CONTRAST BRIGHT CONT. COLOR LENS IRIS IMAGE IRIS PRESET USER COMPONENT HDMI VIDEO
  • Sanyo PLV Z5 | Owners Manual - Page 28
    control ➜ Gamma ➜ Progressive ➜ Lens iris ➜ Lamp iris ➜ Auto black stretch➜ Contrast enhancement ➜ Transient improvement ➜ Gain R/G/B ➜ Offset R/G/B ➜ Gamma R/G/B ➜ Brightness Image adj. Menu 3 Use the Point 7 8 buttons to adjust the setting values and press the OK button. Brightness Press the
  • Sanyo PLV Z5 | Owners Manual - Page 29
    buttons to select the desired lamp mode. You can also select the lamp mode by pressing the LAMP CONTROL button on the remote projector reproduces pictures faithful to the original film quality; it operates on 3-2 and 2-2 pulldown video sources. Lens iris Use the Point 7 8 buttons to adjust the lens
  • Sanyo PLV Z5 | Owners Manual - Page 30
    be selected only when Advanced menu in the Setting Menu (see page 36) is set to "On." You can adjust the following items through this function. Lamp iris Adjust the lamp aperture. Select from the following options: Auto 1 . . Normal open-close speed Auto 2 . . High open-close speed Open . . . Fully
  • Sanyo PLV Z5 | Owners Manual - Page 31
    ] and press the OK button. COLOR M. . . . . Go to COLOR SELECTION. EXIT Exit the Color management mode and return to the Advanced menu. To store the adjusted data, see "Store" on the next page. Press the MENU button when you want to return to the Advanced menu. COLOR MANAGEMENT LIST Color data
  • Sanyo PLV Z5 | Owners Manual - Page 32
    be reset whether or not Advanced menu in the Setting Menu is "On." See page 36. Press the Point 8 or OK buttons to store the adjusted data. The User Image Mode Menu appears. Choose one of the four (4) user image modes with the Point ed buttons and press the OK or
  • Sanyo PLV Z5 | Owners Manual - Page 33
    signal formats which may not be tuned by the auto-tuning system of this projector. Picture Adjustment enables you to precisely adjust several parameters manually to match those signal formats. The parameters manually adjusted is stored for every input. 1 Press the Point ed buttons to select the
  • Sanyo PLV Z5 | Owners Manual - Page 34
    Screen Screen Size Adjustment This projector has the picture screen resize function which enables you signal is 1080i or 720p, a letterboxed picture in a 16:9 screen can be projected by expanding at the wide video aspect ratio of 16:9. In the Zoom mode, you can also adjust the display range with
  • Sanyo PLV Z5 | Owners Manual - Page 35
    720p, a picture with captions in a 16:9 screen can be projected by expanding at the wide video aspect ratio of 16:9. If a part of the captions is out of the screen, adjust is higher than that, lower the resolution before connecting to the projector. • The image data other than the 1280 x 720
  • Sanyo PLV Z5 | Owners Manual - Page 36
    is not operated for four (4) seconds. ✔Note: • If you press the RESET button on the remote control while the Keystone dialog box is displayed, the adjustment will go back to the factory default setting. 36 Select Menu position and press the Point 8 or OK buttons. The Menu position screen appears.
  • Sanyo PLV Z5 | Owners Manual - Page 37
    ceiling-mounted projector. The picture is top/bottom and left/right reversed. Wall . . . . Project the image from a wall-hanging projector. The picture vary from equipment to equipment. For details, refer to the owner's manual of video equipment. Background Select the background screen for when no
  • Sanyo PLV Z5 | Owners Manual - Page 38
    displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option. the image that has been adjusted by the Keystone function, the adjusted data is automatically reset and the projector captures an image without keystone
  • Sanyo PLV Z5 | Owners Manual - Page 39
    as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a operates properly. ✔Note: • When the batteries of the remote control are replaced, the remote control code automatically returns to the initial code (Code 1).
  • Sanyo PLV Z5 | Owners Manual - Page 40
    is used to get the best picture reproduction of the R (red), G (green), and B (blue) LCD panels. If the proper adjustment is not made, you might get vertical noise lines on the screen. This function should be made more than 10 minutes after turning on the projector with or without any signal. A dark
  • Sanyo PLV Z5 | Owners Manual - Page 41
    projected and the operation of the projector. Direct Operation Press the INFO. VGA, D480i, D-480p, D-575i, D-575p, D-720p, D1080i, and D-1080p. A resolution of the connected computer signal is displayed - - -" when no signal. Lamp Time The cumulative lamp operating time is displayed. Image The
  • Sanyo PLV Z5 | Owners Manual - Page 42
    vent. - Are the air filters clean? Clean the air filters periodically or replace it with a new one. The projector is shut down and the WARNING indicator lights red. When the projector detects an abnormal condition, it is automatically shut down to protect the inside of the projector and the WARNING
  • Sanyo PLV Z5 | Owners Manual - Page 43
    clean the inside of the projector. ● Do not look into the holes. A strong light could damage your eyes. (Do not look into the Air intake vent and blower supplied with this projector (model: Z5/Z5BK) to clean the other models: Z4, Z3, and Z1X. If something is wrong with the projector (such as smoke
  • Sanyo PLV Z5 | Owners Manual - Page 44
    air into the projector with the blower watching the position of the dust from the screen. 6 When cleaning is done, pull the blower out of the hole and replace it could break and be stuck inside of the projector. 44 Wave the nozzle back and forth inside of the projector. (Do not attempt to bend
  • Sanyo PLV Z5 | Owners Manual - Page 45
    on a lens, LCD panels, or optical elements inside the projector degrading the quality of a projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Pull out the air filters. Arrows Put your finger on the air filter's tab and
  • Sanyo PLV Z5 | Owners Manual - Page 46
    amount of non-abrasive camera lens cleaner, or use a lens cleaning paper or a commercially available air blower to clean the lens. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. When the projector is not in use
  • Sanyo PLV Z5 | Owners Manual - Page 47
    . Screw Lamp Cover Lamp Handle Screws ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector: ● Replacement Lamp Type No.: PLV-Z5/PLV-Z5BK POA-LMP94 (Service Parts
  • Sanyo PLV Z5 | Owners Manual - Page 48
    the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp with the LAMP REPLACE indicator
  • Sanyo PLV Z5 | Owners Manual - Page 49
    33). - Release the Lens Shift Lock (see page 15). WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or service center. Give the
  • Sanyo PLV Z5 | Owners Manual - Page 50
    the ✽ temperature returns to normal, the POWER indicator emits red light and the projector can be turned on. (The WARNING indicator keeps blinking.) Check and clean the air filters. The projector has been cooled down enough and the inside temperature ✽ returns to normal. When turning on the
  • Sanyo PLV Z5 | Owners Manual - Page 51
    SECAM NTSC NTSC 4.43 PAL-M PAL-N Quit RGB (Analog) RGB (Scart) Quit Image adj. Brightness Contrast Color Tint Color temp. Red Green Blue Sharpness Lamp Control Gamma Progressive Lens iris Advanced menu Reset Store -31 to +31 -31 to +31 -31 to +31 -31 to +31 High Mid Low 1 Low 2 Low 3 User
  • Sanyo PLV Z5 | Owners Manual - Page 52
    Appendix Picture adj. Screen 720p D-1080i D-1080p Resolution for PC input - - - Unknown Language Advanced menu Menu Position Keystone Mounting Rear HDMI setup Background Display Logo Power off confirmation Capture Power management Remote control Shutter demo Cleaning Panel adjustment Highland Lamp
  • Sanyo PLV Z5 | Owners Manual - Page 53
    System Mode Chart PLV-Z5/PLV-Z5BK can basically ) V-Freq. (Hz) 59.94/60 59.94/60 50.00 59.94/60 50.00 System mode D-720p D-720p D-1080i D-1080i D-1080p D-1080p RESOLUTION 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 H-Freq of the projector could be limited. 53
  • Sanyo PLV Z5 | Owners Manual - Page 54
    24.4 mm x 130mm) : 3.6 oz (102 g) (including batteries) Accessories Owner's Manual (CD-ROM) Quick Reference Guide AC Power Cord Remote Control and Batteries Air Blower ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even
  • Sanyo PLV Z5 | Owners Manual - Page 55
    sync.) 14 Vert.sync. 15 ----- Optional Parts The parts listed below are optional. When ordering these parts, specify item name and Type No. to the sales dealer. ● Wall Anchor Kit ● HDMI Cable ● Component Cable (32.8'/10m) ● Scart-VGA Cable (This cable is used for RGB Scart 21Pin Video output of
  • Sanyo PLV Z5 | Owners Manual - Page 56
    Appendix Dimensions Unit: inch (mm) 7.7˚ (Max.) 15.04 (382.0) 5.23 (132.9) Lens Shift Center 2.58 (65.5) Lens Shift Center 11.98 (304.3) 5.11 (129.8) 56
  • Sanyo PLV Z5 | Owners Manual - Page 57
    SANYO Electric Co., Ltd.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Multimedia Projector
MODEL
PLV-Z5
PLV-Z5BK
Owner’s Manual