Sanyo VCC-HD2100 VCC-HD2100 A & E Specifications
Sanyo VCC-HD2100 - Full HD 1080p Network Camera Manual
 |
UPC - 086483075032
View all Sanyo VCC-HD2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VCC-HD2100 manual content summary:
- Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 1
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA Sanyo Company Security Products Division 21605 Plummer Street Chatsworth, CA 91311 Phone: 888. 818. 2597 Fax: 818.717.2716 223 9180 http://us.sanyo.com/security December, 2009 Product Guide Specification Specifier Notes: This product guide - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 2
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA C. Institute of Electrical and Electronics Engineers, Inc. (IEEE) (www.ieee.org) 1. IEEE 802.3af Power Over Ethernet D. International Organization of Standardization (ISO) 1. 9001 - Quality System E. - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 3
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA trained by the manufacturer in the installation and service of the equipment provided. 1080p H.264 compressed video at 30 frames per second. 4. Use a high quality 1/3" CMOS progressive scan image sensor 5. Support C/CS Mount Lenses with Manual - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 4
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA 4. Four (4) Megapixels maximum resolution 5. Three levels of operator privileges shall be available. a. Admin level shall have full access to all functions. b. Operator level shall have access to all functions except configuration settings. c. - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 5
be provided. 12. The camera shall support both fixed IP addresses and dynamically assigned IP addresses provided by a Dynamic Host Control Protocol (DHCP) server. 13. The camera shall be able to interface with SANYO Video Pilot software. Video Pilot shall support full functionality when operating on - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 6
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA 14. Third party application integration of the camera is supported via two (2) Development Kits which provide the necessary information for interfacing. Contact SANYO for details. 15. Image quality selectable at Basic, Normal, Enhanced (default - Sanyo VCC-HD2100 | VCC-HD2100 A & E Specifications - Page 7
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA B. Make any adjustment of camera settings to comply with specific customer's need. 3.6 DEMONSTRATION A. Demonstrate at final inspection that video management system used with devices functions properly. END OF SECTION Project Name/Project Number
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
SANYO VCC-HD2100 1080p 4 MEGAPIXEL COLOR CS BOX CAMERA
Project Name/Project Number
28 23 29 - 14
Video Surveillance Remote Devices and Sensors
Sanyo Company
December, 2009
Security Products Division
21605 Plummer Street
Chatsworth, CA 91311
Phone: 888. 818. 2597
Fax: 818.717.2716 223 9180
Product Guide Specification
SECTION 28 23 29
VIDEO SURVEILLANCE REMOTE DEVICES AND SENSORS
Sanyo VCC-HD2100 4 MEGAPIXEL COLOR CS BOX CAMERA
PART
1 - GENERAL
1.1
SUMMARY
A.
Section Includes
1.
Video Surveillance Remote Devices
B.
Related Sections
1.
Section 28 23 13 – Video Surveillance Control and Management
Systems
2.
Section 28 23 16 – Video Surveillance Monitoring and Supervisory
Interfaces
3.
Section 28 23 19 – Digital Video Recorders and Analog Recording
Devices
4.
Section 28 23 23 – Video Surveillance Systems Infrastructure
1.2
REFERENCES
A.
Federal Communications Commission (FCC) (www.fcc.gov
)
1.
FCC CFR 47 part 15 Class B – Telecommunications – Radio
Frequency Devices – Digital Emission
B.
International Electrotechnical Commission (IEC)
1.
IEC 60529 Degrees of Protection provided by enclosures (IP Code)
Specifier Notes
: This product guide specification is written according to the Construction Specifications
Institute (CSI) 3
‐
Part Format, based on Master Format 2004 and The Project Resource Manual—CSI Manual
of Practice. The Manufacturer is responsible for technical accuracy. By removing the references to specific
Sanyo product names or part numbers, the text may be used also in performance
‐
based specifications.
The section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of
the project and local building code. Words and sentences within brackets [ ] are choices to include or
exclude a particular item or statement. Coordinate this section with other specification sections and the
Drawings.