Sanyo VCC-HD4600 VCC-HD4600 Summary Manual - Page 10
Network Settings
UPC - 086483075704
View all Sanyo VCC-HD4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Network Settings Preparing Your Computer for Network Operation ⴺ Check your operating environment. ( Page 1) ⴼ Connect the camera to the network to which your PC is also connected. ⴾ Configue the network information on your PC. Configure information such as the IP address of your PC. ⵀ Install the "H.264 Plug-in" from the supplied CD-ROM onto your PC. You are now ready to monitor the surveillance video in the H.264 format. ⵂ Start Internet Explorer. The supported Web browser is Internet Explorer Ver.6.0 SP2 or higher, or Internet Explorer Ver.7.0. ⵄ Access the camera from your Web browser. From your Web browser (Internet Explorer), access the camera and log into the system as an "admin" user (administrator). ⵆ In the address bar, type the IP address of the camera and press [Enter] key. When you access the camera, the login screen appears. If this is the first access to the camera, in the Address bar, enter the default IP address as follows. If you set [SSL] to "ON", before the IP address, type "https://" (instead of "http://"). Attempts to access the camera using the default IP address will fail if that address is already being used by another device in the network. If so, change the IP address of the existing device before accessing the camera. 9