Sanyo VPC-CG20 VPC-CG20 Owners Manual English
Sanyo VPC-CG20 - Full HD 1080 Video Manual
 |
UPC - 086483077821
View all Sanyo VPC-CG20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sanyo VPC-CG20 manual content summary:
- Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 1
Dual Camera VPC-CG20EX VPC-CG20 VPC-CG20GX VPC-CG20PX VPC-CG20TA Important note This manual explains how to safely operate the VPC-CG20EX, VPC-CG20, VPC-CG20GX, VPC-CG20PX and VPC-CG20TA. Any information regarding only one of these products will be labeled as such. Please read these instructions - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 2
) DVDs (page 41). You may find the answers to questions or problems concerning camera operation in the sections "COMMONLY ASKED QUESTIONS" (page 48). Symbols used in this manual HINT Points giving some extended instructions or special points to pay attention to. CAUTION Points that require - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 3
SHOOT, PLAY BACK AND SAVE Preparing the camera 1 Insert the battery pack. Battery cover 1 Push out Battery pack Connector markings 2 Open 3 Insert by matching the connector markings 4 Close About saving your recorded data h If you wish to use an SD Memory Card, - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 4
camera on. h If the screen to set the date and time appears, press the MENU button 2 times to cancel it. For how to set the date and time, see page 20. 2 Record. To record a video clip: h Press the [ ] button to begin recording a video clip. h Press the [ ] button - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 5
camera is set up and ready to go i Sanyo declines any claim for compensation for recorded contents etc. in case of photographing or recording failure due to a chance camera or press the SET button. Full-HD Orange frame 6.5MB SET OK 100-0006 00:00:05 Remaining battery power indication English iv - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 6
deleting files, press the MENU button. h Pressing the MENU button 3 times will return you to the screen in step 2. When you are finished using the camera... Press the ON/OFF button for at least 1 second to turn the - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 7
dedicated USB interface cable to connect your camera to the computer. h Connect the cable between the camera's USB/AV terminal and the computer's USB connector. 2 Turn on the camera (page 17). h The USB Connection Screen appears on the camera's monitor. USB CONNECTION COMPUTER PRINTER CANCEL CANCEL - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 8
press the SET button. h The message [Found New Hardware] appears in the task tray, showing that the camera is recognized as a drive. h The card is recognized (mounted) as a disk, and the [XACTI (E:)] icon appears in the [My Computer] window. h The drive name (E:) may be different on your computer - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 9
sure to follow the procedure below. Failure to follow this procedure may cause faulty operation of your computer or corrupt the files in your camera. 1 Left-click on the icon for safely removing hardware in the task tray. h A list appears showing the devices connected to the computer's USB connector - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 10
5 ABOUT THE CARD 6 Media cards that can be used with this camera 6 What "card" means in this manual 6 „ SETUP PARTS NAMES 7 CHARGING THE BATTERY PACK 9 Charging the battery pack 10 INSTALLING THE CARD 12 INSTALLING THE BATTERY PACK 14 About the temperature alert icon 16 TURNING THE - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 11
MANUAL OBTAINING THE INSTRUCTION MANUAL 41 Contents of the Instruction Manual 41 How to obtain the Instruction Manual 45 „ ABOUT THE EYE-FI TRANSFER FEATURE About the Eye-Fi transfer feature 47 „ APPENDICES COMMONLY ASKED QUESTIONS 48 SPECIFICATIONS 56 Camera 56 Camera connectors 60 Battery - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 12
Li-ion battery pack: 1 i Lithium-ion battery pack charger and power cord: 1 i Dedicated USB interface cable (page vi): 1 i Dedicated AV interface cable (page 39): 1 i Lens cap (page 5): 1 i GUIDE FOR BASIC OPERATION (VPC-CG20EX, VPC-CG20GX, VPC-CG20PX, VPC-CG20TA only) i SAFETY MANUAL (safety - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 13
i QUICK GUIDE i Obtaining the PDF instruction manual and cautions English 4 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 14
How to use the accessories k Lens cap 1 2 ˛ 3 4 ˛ k Handstrap (Please purchase a commercially available handstrap.) i To avoid dropping the camera, it is recommended that you attach a handstrap. ˛ ˛ 5 English - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 15
of card that can be inserted into and used with this camera is: i SD Memory Card i SDHC Memory Card i SDXC Memory Card What "card" means in this manual i In this manual, SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards that can be used in this dual camera are referred to as "card". English 6 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 16
SETUP SETUP PARTS NAMES Front Lens Monitor unit Stereo microphone Flash ON/OFF button * The tripod mounting hole is on the bottom. 7 English - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 17
Rear Monitor Card slot cover ON/OFF button „ Operation pad [ ] button Photo shooting button MENU button SET button Multi-indicator Operation pad DC IN terminal cover Battery cover USB/AV terminal HDMI terminal Zoom switch [ ] button Video recording button REC/PLAY button English 8 SETUP - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 18
pack charger. h Insert the connector straight and securely. Battery pack charger Power cord 2 Insert the battery pack in the battery charger. h Insert it in the direction indicated by the [o] mark on the battery pack. Battery pack charger Battery pack [o] mark 3 Plug the power plug into a power - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 19
pack temperature is high, the safety function may be activated and halt charging. Charge a battery pack in the following cases i A battery pack which has not been used for a long time i Newly purchased battery pack FOR AMERICAN USERS: i Use a UL Listed, 1.8 to 3 m (6 to 10 ft.), Type SPT-2 or - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 20
Flashing Problem with the battery pack or battery pack charger i Immediately remove the battery pack from the charger. i Do not use an abnormal battery pack. (The usable life of the battery pack has probably expired.) CAUTION Do not charge the battery pack immediately after the camera has - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 21
SETUP ˛ INSTALLING THE CARD Be sure to format a newly purchased card or one that was used in another device before using it in your camera (page 13). If an unformatted card is used, the card itself may become unusable. Card slot cover 1 Raise up 4 Close 2 Swivel 3 Insert the card - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 22
ON/OFF button (pages 12 and 17). 2 Set the camera to the NORMAL mode (page 24). 3 Press the MENU button. 4 Select the [E] tab, and press the SET button. 5 Select "FORMAT" and press the SET button. i The Format Screen appears. Follow the instructions on the screen to format the card. Shooting without - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 23
SETUP INSTALLING THE BATTERY PACK Please charge the supplied battery pack before using it. Battery cover Battery pack Connector markings 1 Push out 2 Open 3 Insert by matching the connector markings 4 Close English 14 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 24
compartment. In this case, please discontinue its use and replace it with a new battery. Do not use the battery with the outer covering or label removed i Doing so may result in malfunction. HINT About the internal backup battery i This camera's internal battery serves to maintain the date and - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 25
, a temperature alert icon \ will appear as described below. k When the battery or internal camera (excluding battery) temperature rises during use h During camera use, if the temperature of the battery or inside the camera (excluding the battery) rises, a \ icon lights on the monitor. It is still - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 26
button for at least 1 second. h If you briefly press the ON/OFF button, once, the camera will switch to the power save mode. h If you press the REC/PLAY button for at least 1 second, the camera turns on in the playback mode. Monitor unit ON/OFF button REC/PLAY button Turning off - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 27
active In order to preserve battery pack power, the power save (sleep) function will automatically turn off the camera after about 1 minute of save mode has been active for about 1 hour, the camera will switch to the standby mode. In this case, you can restore the power by pressing the ON/OFF button - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 28
, but this does not indicate a malfunction. i If the camera starts to feel uncomfortably hot during use, you might temporarily discontinue use until it cools down, or try holding it in your other hand for a while. Please use a tripod or other support when using the camera for a long time. 19 English - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 29
SETUP DATE AND TIME SETTING The camera will record the date and time an image or audio recording on page 22. Example: To set the clock to 7:30 p.m. on December 24, 2010 1 Turn on the camera (page 17), and press the SET button. h The Clock Set Screen appears. h Follow the procedures below to - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 30
3 Set the clock. 1 Select "TIME". 2 Press the SET button. h The Set Time Screen appears. 3 Set the time to "19:30". h The time is set in the following order: Set the hour → Set the minute. h A 24-hour clock is used for the time display. 4 Press the SET button. CLOCK SET TIME 19:30 OK 4 Set the - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 31
to check that the date and time settings are still correct after replacing the battery pack and before shooting or recording of any type (follow step 1). To correct the date and time settings 1 Turn on the camera. 2 Display the Option Setting Menu 1 (page 27). 3 Select "CLOCK SET" and press the SET - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 32
images). 1 Turn on the camera (page 17). 2 Press the REC/PLAY button. h The mode changes. h The mode changes each time the REC/PLAY button is pressed. 10M-S 10 Ful -HD 001:00:14 REC/PLAY button 2010.12.24 18:41 SD Full-HD 6.5MB SET OK 100-0006 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 33
MODE The "SIMPLE mode" comprises only those functions that are most often used and necessary to operate the camera, while the "NORMAL mode" enables full use of all the camera's many functions. Select the mode that is suitable for your purposes. Switching between the SIMPLE and NORMAL modes - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 34
Accessing/exiting the SIMPLE/NORMAL Mode Menu Screen 1 Set the camera to the recording or playback mode (page 23). 2 Select the desired operating mode (page 24). 3 If the Menu Screen is not displayed, press the MENU - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 35
, and press the SET button. h The Setting Screen for the selected item appears. Push up Select an item to change Description of selected item Select video and photo size SN SET OK Push down Press To keep in HDTV size 10M 2M HDTV size 10M [4:3] SESTET OK English 26 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 36
the SET button up or down to select a tab. h The Menu Screen for the selected tab appears. Push up Push down Tab RECORDING MENU 1 1 2 3 VIDEO PHOTO Ful -HD 10M-S SCENE SELECT 1 FILTER 2 FLASH 3 SELF-TIMER SN SET OK Option tab 5 Toggle the SET button to the right. Push to the right - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 37
to the Menu Screen, press the MENU button. Push up Push down Press Select an item to change RECORDING MENU 1 1 2 3 VIDEO PHOTO SCENE SELECT Ful -HD 10M-S 1 FILTER 2 FLASH 3 SELF-TIMER SET OK Applicable mode 12M 4000x3000 11M 4480x2520[16:9] 10M-H 3648x2736 10M-S 3648x2736 7.5M 3648x2056 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 38
SHOOTING SHOOTING VIDEO CLIP RECORDING 1 Turn on the camera (page 17), and set it to the recording mode (page 23). 2 Press the [ ] button. the recording. h Press the [ ] button again to stop recording. [] button Recording time Full-HD REC000:00:09 5 Available recording time remaining 29 English - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 39
SHOOTING SHOOTING SINGLE SHOTS Capture a still image (single-shot). 1 Turn on the camera (page 17), and set it to the recording mode (page 23). [] button 2 Press the [ ] button. 1 Press the [ ] button halfway. h The autofocus operates, and the image - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 40
point you wish to 1/2 focus on, you can refocus, for example, by changing the shooting angle. i The large target mark appears when Camera shake icon Shutter speed Aperture the camera focuses on a wide area in the center of the screen. Does it seem to take a long time to save images? i When - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 41
Turn on the camera (page 17), and set it to the recording mode (page 23). 2 Press the [ ] button. [ ] button [] button 3 When you see a scene you'd like to capture as a still image, press the [ ] button. 4 Press the [ ] button to end the video clip recording. SHOOTING 2M Full-HD REC000:00:09 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 42
recording time. About the recording size of still images i The size of a still image captured during video clip recording depends on the video clip recording size. Video clip recording size setting Still image recording size !Y + "& , ) [ h It is not possible to capture sequential shots - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 43
two zoom functions: optical zoom and digital zoom. 1 Point the camera lens at the subject. Zoom switch 2 Push the zoom switch mode changes to the digital zoom mode and zooming continues. 3 Take the picture. For video clip recording, see page 29. For shooting single shots, see page 30. Zoom bar - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 44
PLAYBACK PLAYBACK PLAYING BACK VIDEO CLIPS AND STILL IMAGES 1 Set the camera to the playback mode (page 23). h If a video clip was selected, playback begins. Toggle the SET button down. Orange frame 2010.12.24 18:41 SD Full-HD 6.5MB SET OK - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 45
PLAYBACK Video clip playback operation To do this... Do this Normal forward playback Press the SET button. Stop playback During playback, toggle the SET button down. Pause - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 46
uploaded to a computer to be played back, the computer may not be able to play back the video fast enough, making it appear jerky. (The video will always be displayed properly on the camera monitor or a television.) i Depending on the card, recording may end even before the possible recording time - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 47
. Connection cable Image output destination Recording mode Playback Standby Recording mode Dedicated AV Camera monitor NTSC: n PAL: m m n interface cable TV NTSC: m PAL: n n m Camera monitor n m n HDMI cable TV m n m m: Images are output n: Images are not output HINT i HDMI - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 48
". Supplied dedicated AV interface cable To USB/AV terminal White plug: To Audio Input (L) terminal Red plug: To Audio Input (R) terminal Yellow plug:To Video Input terminal Connecting to the HDMI terminal Use a separately sold mini-HDMI cable to connect to a TV. Set the input to "HDMI". Mini HDMI - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 49
monitor. (Use the TV controls to adjust the volume.) i The same playback procedure as when playing back with the camera is used to play back audio recordings as well. CAUTION Insert and pull out the cable carefully i When connecting the cables, make sure that the - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 50
the Instruction Manual. HOW TO READ THIS MANUAL QUICK SEARCH BY OPERATION CHECKING THE INCLUDED ACCESSORIES How to use the accessories ABOUT THE CARD Media cards that can be used with this camera What "card" means in this manual GETTING THE MOST OUT OF YOUR CAMERA High-quality images with "Full High - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 51
SINGLE SHOTS Using the flash SHOOT A STILL IMAGE WHILE RECORDING A VIDEO CLIP MACRO-PHOTOGRAPHY (ZOOM) OBTAINING THE INSTRUCTION MANUAL PLAYBACK PLAYING BACK VIDEO CLIPS AND STILL IMAGES How to save one frame from a video clip as a still image SLIDESHOW PLAYBACK PLAYBACK VOLUME DELETING FILES - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 52
Resize Rotate PLAYBACK MENU 2 Correcting the image Editing video clips Printing instructions FILE INFO DISPLAY „ OPTION SETTINGS DISPLAY THE OPTION Checking the remaining number of images and video recording time For audio recordings CHECKING THE REMAINING BATTERY PACK CHARGE „ OTHER DEVICES AND - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 53
THE INSTRUCTION MANUAL Configuration of directories in the card File formats Cautions when using as a card reader USING AS A PC CAMERA For Windows XP Using as a PC camera USING THE SOFTWARE Operating environment Obtaining the software CONNECTING TO A TV CONNECTING TO A TV Connecting to a video - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 54
How to obtain the Instruction Manual 1 Remove the card from the camera. h The program to access the website is stored in your camera's internal memory. This program cannot be accessed while a card is installed in the camera. 2 Start your computer, and use the supplied dedicated USB interface cable - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 55
menu) appears. 6 Click on [Go to Xacti CG20 Web Support page]. h The screen to select your desired language appears. When you click on a language selection, the website page introducing this camera opens. h Select and download the desired instruction manual from the website. HINT If the Autorun - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 56
i Automatic halt of Eye-Fi operation when battery is low i AC adaptor connection restrictions (may or may not be supported, depending on the camera) i SSID setup/delete HINT i The Instruction Manual for the Eye-Fi transfer feature can be obtained from the Sanyo website (page 45). * "Adobe Reader" is - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 57
the camera in your pocket to warm it up before using it. Keep the battery pack in an environment of 10 to 40 °C (50 to 104 °F). If a battery becomes be assumed that the battery has reached the end of its service life. Please replace it with a new battery. Replace with a new battery pack. If this is - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 58
the self-timer and the exposure compensation are retained even after the camera is turned off. Select the resolution setting according to the intended use of a photo (trimming). +, G, t: For printing standard photo (photo service) sizes. ,, [: For photos displayed on a web page, or sent as e-mail - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 59
image sensor and may produce a coarser image. Set the scene select function to the landscape + mode when photographing. Or, set the focus range setting to manual focus -, and set the distance to ∞. APPENDICES English 50 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 60
displayed image contain some red, blue and green dots, or why are black spots visible? Why is the image too bright? Answer Condition due to for a bright subject, for example, by changing the shooting angle. Hold the camera correctly and slowly press the [ ] button halfway to lock the focus. Then - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 61
is the playback image distorted? Answer This may happen when trying to play back images stored on a card from a different digital camera. If the subject moves or the camera is moved during recording, a distorted image may sometimes occur. Action Play back images that were recorded on a card using - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 62
motor-like sound during video clip playback? Why is problem with the printer. Action Not a malfunction. Not a malfunction. We cannot guarantee the accurate playback of files that have been edited using a computer. Not a malfunction. Adjust the volume on the TV. Please refer to the instruction manual - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 63
internal circuitry problem may be the cause. The card contains files that were saved using a device other than this camera. Action Select video clips that the AC adaptor (optional) and the battery pack from the camera, wait a few minutes, then reinstall the battery pack and try again. After saving - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 64
abroad? Answer - Why does the "System error" message appear? A problem has occurred within the camera or card. Action When the camera is connected to a TV, you can switch the camera's video output to NTSC or PAL. If you have questions about accessories etc., please consult with a dealer near - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 65
to 64 GB) Image sensor/ camera effective number of pixels 1/2.33-inch (1.1 cm) CMOS sensor Still images: Approx. 10 million pixels Videos (HD mode): Approx. 8.3 million pixels Videos (SD mode): Approx. 10 million pixels * Video clip files recorded with models VPC-CA65 and VPC-CG65 are in the same - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 66
/s (60i) Y: 1920 × 1080 pixels, 30 fps (30p) ": 1280 × 720 pixels, 60 fps (60p) &: 1280 × 720 pixels, 30 fps (30p) ): 640 × 480 pixels, 30 fps (30p) h The 60 fps frame rate of this camera is 59.94 fps, and the 30 fps frame rate is 29.97 fps. Full-auto TTL; manual setting available Focal - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 67
(31.50 in.) to 2.2 m (7.22 ft.) (tele) Auto-flash, forced flash, flash off TTL-type AF (still image shooting mode: 9-point range finder/spot focus; video clip recording mode: Continuous focus), manual focus Approx. 2-second delay, 10-second delay English 58 APPENDICES - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 68
) ×1 VAR-G9 3.4 W (When using the Li-ion battery during recording) 85.7 (W) × 37.4 (D) × 110.3 (H) mm 3.37 (W) × 1.47 (D) × 4.34 (H) in. (Maximum dimensions) Volumetric capacity: Approx. 175 cc Approx. 157 g (5.5 oz.) (camera only [without battery pack and card]) Approx. 175 g (6.2 oz.) (including - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 69
USB USB 2.0 High Speed PC camera: USB video class Video output Total number of scan lines (effective number of scan lines): 750p (720p)/ 1125i (1080i)/525p (480p) Audio output: L-PCM 48 kHz sampling Battery life Shooting Playback Still image shooting mode Video clip recording mode Approx. 190 - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 70
images m 10 images 2,390 images 4,800 images t 49 images 11,300 images 22,700 images ! Y Video clip mode " & 14 sec. 18 sec. 18 sec. 24 sec. 1 hr. 1 min. 1 once, and then recording continues in a new file. In the video clip recording mode, when the size of the file being recorded exceeds - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 71
-indicator will light, flash, or be off, depending on the different camera operations. Color Multi-indicator status Camera status Multi-indicator Green Lit Flashing Connected to a computer or printer Power save mode active Orange Lit Connected to a TV Slow Rise in internal temperature - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 72
to 240 V, 50 to 60 Hz, 5 W DC 4.2 V, 550 mA Supplied or separately sold Lithium-ion battery pack (DB-L80) 0 to 40 °C (32 to 104 °F) (when charging) -20 to 60 °C your local dealer for details. Supplied Li-ion battery pack Model number Voltage Capacity Ambient Temperature environment Humidity - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 73
Pentium are registered trademarks of Intel Corporation (USA). In this manual, the Microsoft® Windows® 2000 operating system, Microsoft® Windows® is a trademark of FotoNation® Inc. Red Eye software© 2003-2005 FotoNation In Camera Red Eye - covered by U.S. Patent No. 6,407,777. Other patents Pending. - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 74
up and ready to go i Sanyo Electric shall not be held responsible for any problems resulting from the use of this camera. i Sanyo Electric declines all responsibility for damages due to improper use of the camera, failure to adhere to the instructions given in this manual, or repairs or changes done - Sanyo VPC-CG20 | VPC-CG20 Owners Manual English - Page 75
SANYO Electric Co., Ltd.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
 |
 |
VPC-CG20EX
VPC-CG20
VPC-CG20GX
VPC-CG20PX
VPC-CG20TA
GUIDE FOR
BASIC OPERATION
Dual Camera
Please read these instructions carefully before using the camera.
Make sure to read and understand the separate booklet “SAFETY MANUAL”.
Keep this manual in a safe place for later reference.
Important note
This manual explains how to safely operate the VPC-CG20EX, VPC-CG20,
VPC-CG20GX, VPC-CG20PX and VPC-CG20TA.
Any information regarding only one of these products will be labeled as such.