Schwinn 122 Upright Bike Assembly Manual

Schwinn 122 Upright Bike Manual

Get Schwinn 122 Upright Bike PDF manuals and user guides View all Schwinn 122 Upright Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn 122 Upright Bike manual content summary:

  • Schwinn 122 Upright Bike | Assembly Manual - Page 1
    122/123 Schwinn® Upright Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions e-mail from: Keith Weier date: 7/14/2005 page:1/16
  • Schwinn 122 Upright Bike | Assembly Manual - Page 2
    exercise bike. Failure to follow any of these safeguards may result in injury or serious health problems. • Read and understand the Owner's Manual and operation instructions objects into moving parts of the exercise equipment. • This the moving pedals. Do not allow anyone to touch the bike while it
  • Schwinn 122 Upright Bike | Assembly Manual - Page 3
    Manual) • Refer to the Maintenance section in the Owner's Manual and disconnect power supply before servicing the bike bike and to avoid any possible contact with the moving pedals 122/123 Schwinn Upright Bike Parts List, Hardware Chart, and Assembly Instructions Assembly of the 122/123 Upright Bike
  • Schwinn 122 Upright Bike | Assembly Manual - Page 4
    1 1 1 2 1 1 1 1 1 1 1 1 1 4 1 1 Parts List Description Reference # Computer 1 Handlebar Assembly 2 Upper Heart Rate Cable 4 Computer Mounting Screws 10 Flat Head Screw8x16L 11 Front Stabilizer tube (w/wheels) 12 Pedals 13 Main Unit 14 Rear Stabilizer Tube 15 Seat Post Adjustment
  • Schwinn 122 Upright Bike | Assembly Manual - Page 5
    Stage#5 Screws M3x14mm Allen Key Screwdriver 1 (Pedal Wrench) Box Spanner 1 Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please contact Schwinn at 1.800.864.1270 e-mail from
  • Schwinn 122 Upright Bike | Assembly Manual - Page 6
    122/123 Assembly Drawing with Reference Numbers e-mail from: Keith Weier date: 7/14/2005 page:6/16
  • Schwinn 122 Upright Bike | Assembly Manual - Page 7
    Flat Head Screw 8x16L 12 Front Stabilizer tube (w/wheels) 13 Pedals 15 Rear Stabilizer Tube 16 Seat Post Adjustment Knob 17 Seat Instructions IMPORTANT!: To ensure ease of assembly please verify the size and quantity of all the required assembly hardware and parts with the enclosed parts
  • Schwinn 122 Upright Bike | Assembly Manual - Page 8
    just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free. Assembly Stage #1 Attach Front and Rear bolts securely. Assembly Stage #2 Attach Pedals to the Crank Arms on Main Unit e-mail from: Keith Weier date: 7/14/2005 page
  • Schwinn 122 Upright Bike | Assembly Manual - Page 9
    . To avoid stripping of the threads be careful to use the proper pedal. 3. Attach PEDAL STRAPS (#28) to each PEDAL (#13). Again each strap is labeled with an R or an L corresponding to the right and left pedal straps. Assembly Stage #3 Attach Seat Post, Slider, and Pad to Main Unit e-mail from
  • Schwinn 122 Upright Bike | Assembly Manual - Page 10
    seat post adjustment knob and tightening into appropriate adjustment hole on the seat post. Leg should be almost fully extended at the bottom of the pedal stroke. Fore and Aft seat position can be adjusted with the seat slider knob. If the seat wobbles make sure that both knobs (#16 and
  • Schwinn 122 Upright Bike | Assembly Manual - Page 11
    Assembly Stage #4 Attach Computer/Handlebar Mast to Main Unit. Attach Handlebar Assembly to Computer/Handlebar Mast. Assembly Hardware Required: (4) M8 Allen Bolt 16mm (item #8) (already on main unit) (4) Curved Washers (item #17) (Already on main unit) (1) T-Knob (item #22) (1) T-Knob Bushing (
  • Schwinn 122 Upright Bike | Assembly Manual - Page 12
    1. Attach the LOWER COMPUTER CABLE (#10) from the MAIN UNIT (#14) to the UPPER COMPUTER CABLE (#9) from the bottom of the COMPUTER/HANDLEBAR MAST (#6). 2. Slide the COMPUTER/HANDLEBAR MAST (#6) onto the MAIN UNIT (#14). 3. Fasten the COMPUTER HANDLEBAR MAST to the MAIN UNIT with the 8mm BOLTS (#8)
  • Schwinn 122 Upright Bike | Assembly Manual - Page 13
    Assembly Stage #5 Attach Handlebar Cover to Handlebar Assembly. Assembly Hardware Required: (4) Screws M3x14L (item#29) 1. Attach FRONT HANDLEBAR COVER (#27) and the REAR HANDLEBAR COVER (#28) around the HANDLEBAR ASSEMBLY (#2) using 4 SCREWS (#29). e-mail from: Keith Weier date: 7/14/2005
  • Schwinn 122 Upright Bike | Assembly Manual - Page 14
    Assembly Stage #6 Attach Computer Console to Computer/Handlebar Mast & Water Bottle Cage Assembly Hardware Needed: (4) Computer Screws (item #5) (Already attached to computer) (2) Screw 5x14L (item#19) 1. Attach UPPER COMPUTER CABLE (#9) exiting top of COMPUTER/HANDLEBAR MAST (#6) to the bottom
  • Schwinn 122 Upright Bike | Assembly Manual - Page 15
    and now you can begin to reach your fitness goals! Please reference the Owner's Manual for information regarding computer operation, product maintenance, Warranty information, and general fitness and exercise guidelines. Schwinn Customer Service 1.800.864.1270 e-mail from: Keith Weier date
  • Schwinn 122 Upright Bike | Assembly Manual - Page 16
    Troubleshooting the Schwinn 122/123 Upright Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Computer will not start, function, or is blank... (SOLUTION): 1. Ensure the batteries were installed correctly. 2. Check the wiring connections and connector
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
122/123 Schwinn
®
Upright Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions
e-mail from: Keith Weier
date: 7/14/2005
page:1/16