Schwinn 202 Recumbent Bike Assembly Manual

Schwinn 202 Recumbent Bike Manual

Get Schwinn 202 Recumbent Bike PDF manuals and user guides View all Schwinn 202 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals

Schwinn 202 Recumbent Bike manual content summary:

  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 1
    202 Schwinn® Recumbent Exercise Bike Parts List Full Size Hardware Chart Product Illustration Assembly Instructions 202 Recumbent Exercise Bike
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 2
    injury, please read the following precautions before using the Schwinn 202. 1. It is the responsibility of the owner to ensure that all users of this equipment are adequately informed of all precautions. 2. Read all instructions in this manual and in the accompanying literature and follow them
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 3
    202 Schwinn Recumbent Bike Parts List, Hardware Chart, and Assembly Instructions Assembly of the 202 Recumbent Bike is divided into 5 easy stages; each comprised of only a few setup steps. Before proceeding with the assembly, please read over the easy to follow instructions to familiarize yourself
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 4
    8 4 1pr 19 2 2 1 1 1 1 1 1 1 1 4 1 1 2 1 1 Parts List Description Reference # Allen Bolt M8 x P1.25 x 45mm 1 Flat Washer 2 Seat Pin Adjustment Knob 16 Front Stabilizer Tube (w/wheels) 17 Pedal Strap (Left & Right) 18 Curved Washer 19 Acorn Nut 20 Pedals (Left & Right) 21 Allen Bolt
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 5
    Curved Washer Curved Washer Allen Bolt M8xP1.25x16mm Flat Washerф 8* ф 19* 2T Screwdriver Allen Key Note: Please verify you have all correct parts and quantities before assembling unit. If you are missing items, are short quantities, or have damaged components, please call 1-800-4-MY-HOME for
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 6
    202 Assembly Drawing with Reference Numbers 34 33 57 56 29 30 28 27 58 22 19 26 25 21 31 3 8 16 17 18 19 12 47 13 20 14 9 23 15 11 22 2 22 22 2 32 20 19 10 24
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 7
    34 56 57 Replacement Parts List Description Seat Pin Adjustment Knob Seat Seat Back Handlebar Assembly Seat Rail Rear Stabilizer Tube Seat Rail End Cap Buffer Buffer Plate Flat Washer Screws Carriage Bolt M8 x P1.25 x 75mm Front Stabilizer Tube (w/wheels) Acorn Nut Pedals
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 8
    and parts with the enclosed parts list and full size hardware chart. Each step of the assembly process has been broken down into 5 easy-to-follow stages. Please take just a few moments to read over these instructions to familiarize yourself with the process to make assembly quick and trouble-free
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 9
    Step 3: Attach SEAT BACK (#5) to SEAT FRAME (#8) with 4 ALLEN BOLTS (#1) and 4 WASHERS (#2). Tighten Bolts. Note: Finished seat should look like picture below:
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 10
    Assembly Stage #2 Attach Rear Stabilizer and Seat Rail to Seat Assembly . Assembly hardware required: (4) M8 Allen Bolts 16mm (item #22) (4) Flat Washers Ø8 * Ø19 * 2T(item#2) Step 4: Attach SEAT RAIL (#9) to REAR STABILIZER TUBE (#10) with 4 FLAT WASHERS (#2) and 4 ALLEN BOLTS (#22). Tighten
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 11
    threading on the left pedal is reversed from the right pedal. Counterclockwise rotation tightens while Clockwise rotation loosens on the left pedal. To avoid stripping of the threads be careful to use the proper pedal. Attach PEDAL STRAPS (#18) to each PEDAL (#21). Again, each strap is labeled with
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 12
    Assembly Stage #4 Attach Seat Rail and Lower Base Frame to Main Unit 9 31 Assembly Hardware Required: (7) Allen Bolts 16 mm long (item #22) (3) Flat Washers (item #2) (2) Allen Bolts 90 mm long (item #24) (2) Curved Washers (item #19) (4) Flat Washer (item #7) Step 10: Slide the LOWER BASE FRAME
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 13
    from MAIN UNIT and Seat Rail. Tape can be used around the attachment of the two cable ends to ensure remaining excess wire into the seat rail and replace the end cap on the end of the seat rail verify that the handgrip heart rate works by hitting manual start and then placing your hand on the grip
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 14
    Assembly Stage #5 Attach Console Mast to Main Unit 31 STEP15 34 33 STEP14 29 STEP13 22 19 57 30 56 28 27 26 25 58 31 31 Step 16 Assembly Hardware Required: (4) Allen Bolts 16 mm long (item #22) (4) Curved Washers (item #19) (4) Computer Screws (item #33) (2) Water Bottle Cage Screws M5*12 mm
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 15
    MAST (#30), the reading rack should wrap around the bottom of the COMPUTER. Attach COMPUTER to CONSOLE MAST with COMPUTER MOUNTING SCREWS (#33). (In computer back) Tighten with Phillips head screwdriver. Step 16: Plug power adapter into the wall and into the recumbent bike. The power input on the
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 16
    Troubleshooting the Schwinn 202 Recumbent Exercise Bike TIP: Use assembly diagram(s) as reference when troubleshooting unit. PROBLEM: Computer will not start, function, or is blank... (SOLUTION): 1. Ensure the unit is plugged into a 110v outlet. 2. Check the wiring connections and connector
  • Schwinn 202 Recumbent Bike | Assembly Manual - Page 17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
202 Schwinn
®
Recumbent Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions
202 Recumbent Exercise
Bike