Schwinn 270 Recumbent Bike Assembly and Owner's Manual
Schwinn 270 Recumbent Bike Manual
View all Schwinn 270 Recumbent Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Schwinn 270 Recumbent Bike manual content summary:
- Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 1
270 / 230 / 430 / 470 / 2.5 Manual en Español Latino Americano: http://www.schwinnfitness.com ASSEMBLY MANUAL / OWNER'S MANUAL - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 2
Adjustments 27 Specifications 5 Power Up / Idle Mode 27 Before Assembly 5 Quick Start Program 28 Parts 6 User Profiles 28 Hardware 7 Pausing or Stopping 33 Tools 7 Results / Cool Down Mode 34 Assembly 8 GOAL TRACK Statistics 34 Moving the Machine 18 Console Service Mode - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 3
. Failure to use genuine replacement parts can cause a risk to users, keep the machine from operating correctly and void the warranty. • Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Manual. • Read and understand the complete - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 4
Owner's Manual. • Injury or death is possible if Caution is not used while using this machine. • The maximum user weight power supply have been• Sétqeouysieptzeepmdruendatenpnodtulorfrnosequupneasdvovoutuossuictnilfoilsigemezrcpdelety with the limits for a Class B digital device, pursuant to Part - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 5
Specifications Maximum User Weight: 300 lbs. (136 kg) 49.9" (126.8 cm) Power Requirements: Operational Voltage: Operational Voltage 9VDC Operating Current: 1500 mA 64" (162.5 cm) 27.7" (70.3 cm) Regulatory Approvals: AC Power Adapter: UL listed, CEC certified (or equivalent), Rated 120V - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 6
PARTS 17 16 15 14 13 12 2 1 5 6 7 3 4 9 11 8 10 Item Qty Description 1 1 Console 2 1 Water Bottle Holder 3 1 Seat Back 4 1 Seat Cover 5 1 Seat Frame Assembly 6 1 Seat Bottom 7 1 Seat Adjustment Handle 8 1 Rear Stabilizer 9 1 Frame Item Qty Description 10 1 AC Adapter - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 7
HARDWARE / TOOLs A B C D Item Qty Description A 8 Button Head Hex Screw, M8x20 B 10 Button Head Hex Screw, M6x12 C 4 Flat Washer, M8 D 8 Lock Washer, M8 E 10 Flat Washer, M6 E F G H I J Item Qty Description F 2 Phillips Head Screw, M5x12 G 14 Lock Washer, M6 H 4 Curved - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 8
ASSEMBLY 1. Attach Stabilizers to Frame Note: H ardware is pre-installed and not on the Hardware Card. * 6mm X2 * * * 6mm X2 * * * 8 9 12 8 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 9
2. Attach the Seat Frame Assembly to the Seat Rail NOTICE: Do not crimp the Heart Rate Cable. Once all hardware has been inserted, be sure to fully tighten it. 6mm X4 A D C 5 X2 B GE 4mm 9 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 10
3. Attach Seat Pads to Seat Frame Assembly 3 6 X8 E G B 4mm X4 H G I #2 10 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 11
4. Attach Cover to Frame Assembly 4 11 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 12
5. Attach Seat Adjustment Handle to Frame Assembly 7 12 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 13
6. Connect the Cables and Attach the Console Mast to Frame Assembly NOTICE: Do not crimp Console Cables. 16 14 X4 A 6mm J D 15 13 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 14
* * 7. Remove Hardware from Console NOTICE: Do not crimp the cable. Note: H ardware is pre-installed and not on the Hardware Card. * 1 X4 #2 8. Connect Cables and Attach Console to Frame Assembly NOTICE: Align the clips on the cable connectors and make sure the connectors lock. Do not - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 15
9. Attach Pedals to Frame Assembly NOTICE: The Left Pedal is reverse-threaded. Be sure to attach Pedals on the proper side of the Bike. Orientation is based from a seated position on the bike. The Left Pedal has an "L", the Right Pedal an "R". 13 11 15 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 16
10. Attach Water Bottle Holder to Frame Assembly #2 X2 2 F 16 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 17
to ensure that all hardware is tight and components are properly assembled. Be sure to record the serial number in the field provided at the front of this manual. Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual. 17 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 18
abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. 1. Remove the power cord. 2. Use the Transport Handle to carefully lift the machine onto the transport rollers. 3. Push the machine into position. 4. Carefully lower the machine - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 19
from the machine. Injury to you or damage to the machine can occur. 3. Tighten the upper locking nut to lock the leveler. Make sure the bike is level and stable before you exercise. X2 19 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 20
only. • Before each use, examine this machine for loose parts or signs of wear. Do not use if found in this condition. Monitor the Seat, Pedals, and Crank Arms closely. Contact Nautilus® Customer Service for repair information. • Maximum user weight limit: 300 lbs. (136 kg). Do not use if you - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 21
I O G M L FK J A Console B MP3 Input C USB Port D Water Bottle Holder E Transport Handle F Stabilizer G Leveler H Handlebar, Side I Contact Heart Rate (CHR) Sensors J Power Connector K Transport Wheel L Fully Shrouded Flywheel M Pedal N Storage Bin O Seat Adjustment Handle P Handlebar, Upright - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 22
Console features the Schwinn Dual Track™ display with touch control buttons to navigate you through the exercise programs. Resistance Level Quick Buttons Fan 10 9 8 7 6 5 4 3 2 1 10% 40% 70% Hr 21 15 QUICK START PROGRAMS PAUSE/ END GOAL TRACK 25 18 9 5 LAST 30 DAYS LONGEST WORKOUT CALORIE - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 23
the current heart rate value falls into for the current User. These Heart Rate Zones 3 can be used as a workout guide for a certain target zone (anaerobic, aerobic, or fat burn). Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in your chest - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 24
Workout Values. and can be customized for each User (Consult the "Edit User Profile" section of this manual). GOAL TRACK Speed 18 The Speed display CURRENT WORKOUT received by the Console, the icon will flash. Consult a physician before you start an exercise program. Stop exercising if you feel - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 25
exercise. Contact Heart Rate (CHR) sensors are installed to send your heart rate signals to the Console. The Console heart rate monitor. QUICK START PROGRAMS PAUSE/ END GOAL TRACK OK your heart rate signals to the Console. The CHR sensors are the stainless steel parts of the Handlebars. To use, - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 26
Calculations Your maximum heart rate usually decreases from 220 Beats Per Minute (BPM) in childhood to all exercises and fitness regimens, always use your best judgment when you increase your exercise time or intensity. Heart Rate BPM (beats per minute) 250 200 150 100 50 FAT-BURNING TARGET - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 27
heart rate displayed on the console is an approximation and should be used for reference only. • 3 times a week for 30 minutes each day. • Schedule workouts in advance and try to follow the schedule. Seat Adjustment Correct seat placement encourages exercise efficiency and comfort, while reducing - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 28
goes back to the Power-Up / Idle Mode screen. Note: To adjust these selections, consult the "Console Set-Up Mode" section. Quick Start ( Manual ) Program The Quick Start ( Manual ) program lets you start a workout without entering any information. During a Manual Workout, each column represents - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 29
the PAUSE/END button and the console will go back to the Power-Up Mode screen. 4. The Console display shows the NAME prompt and the current User Profile name. Note: The User name will be blank if this is the first edit. The name of a User Profile is limited to 10 characters. The currently active - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 30
PAUSE/END button and the console will go back to the Power-Up Mode screen. 4. The Console display shows the RESET prompt and the current User Profile name. Push OK to start the Reset User Profile option. 5. The Console will now confirm the request to reset the User profile (the default selection - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 31
from the FEEDBACK category. The Fitness Test program first prompts you to select your fitness level-Beginner ( "BEG" ) or Advanced ( "ADV" ). The Console will use the Age and Weight values for the selected User Profile to calculate the Fitness Score. Start to workout and hold the Heart Rate Sensors - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 32
the Recovery Test Program. The Console will show "STOP EXERCISING" and the goal will begin to count down. Stop exercising but continue to program to work correctly. The Target Heart Rate programs use your age and other User information to set the Heart Rate Zone values for your workout. The console - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 33
to set the Heart Rate zone for the workout, and push OK. The Console shows the Heart Rate zone (percent) on the left, and the Heart Rate range for the User on the right side of the display. Consult a physician before you start an exercise program. Stop exercising if you feel pain or tightness in - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 34
(and Achievements) The statistics from every workout are recorded to a User Profile. The Schwinn Dual Track™ Console shows the Goal Track workout Statistics on the Lower Display in three channels: a.) TIME (total), DISTANCE (total), and CALORIES (total) b.) SPEED (average), RPM (average), and - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 35
about Body Mass Index (BMI) and the weight that is appropriate for you. Use the values user workouts have been reset. 10. Push GOAL TRACK to return to the Power-Up screen. When a User performs a workout that surpasses the "LONGEST WORKOUT" or "CALORIE RECORD" of the previous workouts, the Console - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 36
for service technician use only). 1. Hold down the PAUSE/END button and Right button together for 3 seconds while in the Power-Up Mode to go into the Console when there is data in User Statistics, the statistics convert to the new units. 7. Push OK to set. 8. The Console display shows the Sound - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 37
the machine. Place the power cord in a secure location. Daily: Before each use, examine the exercise machine for loose, broken, damaged, or worn parts. Do not use if found in this condition. Repair or replace all parts at the first sign of wear or damage. After each workout, use a damp cloth to - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 38
Maintenance Parts A VN U T CC D AA BB Z F X Y G H W O M L P K B C E I J SRQ 38 - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 39
A Console B Seat Back C Seat Cover D Water Bottle Holder E Handlebar, Side F Seat Bottom G Seat Adjustment Handle H Frame Assembly I Rear Stabilizer J Pedal, Left K Shroud, Left L Transport Wheel M Stabilizer, Front N Heart Rate Cable, Lower O Speed Sensor P Crank Arm Q Servo Motor R Brake Assembly - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 40
Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Things to Check Check electrical (wall) outlet Check connection at front of unit Check data cable integrity Check data cable connections/orientation Check console display for damage Console Display Unit operates - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 41
will not turn off Fan will not turn on, but Console operates Unit rocks/does not sit level Seat Assembly shifts / squeaks when in use Pedals loose/unit difficult ) Check data cable integrity Check data cable connections/orientation Reset machine Check for blockage of fan Check leveler adjustment Be - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 42
or Canada. Terms • Frame 10 years • Mechanical parts 2 years • Electronics 1 year • Labor 3 months (Labor support does not include the installation of replacement parts involved in the initial product assembly and preventative maintenance services.) How Nautilus Will Support the - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 43
for warranty service, call 1-800-4-MY-HOME®. What Is Not Covered Damage due to abuse, tampering or modification of the Product, failure to properly follow assembly instructions, maintenance instructions, or safety warnings as stated in the Product Documentation (Assembly, Owner's Manuals, etc - Schwinn 270 Recumbent Bike | Assembly and Owner's Manual - Page 44
Nautilus® 8002160.090113.C Bowflex® Schwinn® Fitness EN Universal®
ASSEMBLY MANUAL / OWNER’S MANUAL
Manual en Español Latino Americano:
270 /
2.5